Commands for managing a tk-start tk915 GPS tracker

tkstar-tk915.adoc

TKSTAR-TK915 SMS Commands

Nota

• <space> means space character

• <phone number> like 00330612345678 (prefer international format)

Table 1. Admin commands

Description	Command	Response	Comment
Change password	password<current password><space><new password>	password ok
Enable admin phone number	admin<password><space><phone number>	admin ok	Up to 5 phone numbers.
Disable admin phone number admin	noadmin<password><space><phone number>	noadmin ok

Table 2. Configuration commands

Description	Command	Response	Comment
Reset hardware	begin<password>	begin ok
Check the device	check<password>	device informations
Timezone setting	timezone<password><space><timezone>	time ok	ex: timezone123456 +2

Table 3. Network commands

Description	Command	Response	Comment
Enable GPRS	gprs<password>	gprs ok
Disable GPRS	nogprs<password>	nogprs ok
Set APN	apn<password><space><APN name>	apn ok
Set APN user	apnuser<password> <APN username>	apnuser ok
Set APN password	apnpassword<password> <APN password>	apnpassword ok

Table 4. Alarm commands

Get position	g<password>#	location informations
Enable shock detection	shock<password>	shock ok
Disable shock detection	noshock<password>	noshock ok
Sleep after 10min	sleep<password><space><time>	sleep time ok
Sleep by shock after 5min	sleep<password><space>shock	sleep shock ok
Disable sleep mode	sleep<password><space>off	sleep off ok
Enable alarm when move	move<password><space><distance in meter>	move ok	ex: move123456 500 (over 500m)
Disable alam when move	nomove<password>	nomove ok
Enable over-speed alarm	speed<password><space>080	speed ok	ex: speed123456 080 (over 80km/h)
Disable over-speed alarm	nospeed<password>	nospeed ok
Enable Auto location	t<time w/ 3 digits><time unit s/m/h><occurs w/ 3 digits>n<password>	location informations	ex: * t030s005n123456 send location every 30s, 5 times. * t001h001n123456 send location every hour, 1 time. * t005m**n123456 send position every 5min *time: from 20sec / cycle between 000 and 255.
Disable Auto location	notn<password>	notn ok

I lost my password, can somebody tell me what to do

Hi, I have a tk405 4g, and I can't get the adminip command to work. The tkstar website gives me an error and it doesn't respond to me via SMS. When I check with the check****** command, the default configuration appears. Does anyone know what could be happening? Do I need any extra configuration or do I need to disable something for the adminip command to work?
Thanks a lot.

@carlosbarahona Did you try to include your current password in the command?
Something like adminip123456 {your_public_ip} {port}