Created
January 9, 2021 22:08
-
-
Save gotno/cfb530c3873cf98f23644c54dd5e16c8 to your computer and use it in GitHub Desktop.
Anycubic Mega X start gcode with nozzle purge/wipe
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G21 ;metric values | |
| G90 ;absolute positioning | |
| M82 ;set extruder to absolute mode | |
| M107 ;start with the fan off | |
| G28 X0 Y0 ;move X/Y to min endstops | |
| G28 Z0 ;move Z to min endstops | |
| G1 Z15.0 F{speed_travel} ;move the platform down 15mm | |
| G92 E0 ;zero the extruded length | |
| ; remove the following line | |
| ;G1 F200 E3 ;extrude 3mm of feed stock | |
| ; nozzle purge/wipe | |
| G1 X40 E25 F200 ; Extrude 25mm of filament in a 4cm line | |
| G92 E0 ; zero the extruded length | |
| G1 E-1 F200 ; Retract a little | |
| G1 X80 F3200 ; Quickly wipe away from the filament line | |
| G92 E0 ;zero the extruded length again | |
| G1 F{speed_travel} | |
| M117 Printing... | |
| G5 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
so this is what it should end up looking like?
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{speed_travel} ;move the platform down 15mm
G92 E0 ;zero the extruded length
; nozzle purge/wipe
G1 X40 E25 F200 ; Extrude 25mm of filament in a 4cm line
G92 E0 ; zero the extruded length
G1 E-1 F200 ; Retract a little
G1 X80 F3200 ; Quickly wipe away from the filament line
G92 E0 ;zero the extruded length again
G1 F{speed_travel}
M117 Printing...
G5