U-Boot 2013.07-H20250211a (Jun 09 2025 - 21:30:32)
apll_freq = 1200000000
mpll_freq = 840000000
vpll_freq = 1000000000
sdram init start
DDR clk rate 840000000
80000e5c 00000000 00000000
sdram init Finished
----- LZMA_VERISON : 0x20231219
image entry point: 0x80100000
Board: PRJ007 (Ingenic XBurst PRJ007 SoC)
DRAM: 128 MiB
DTB: 0x8013fa4c
######################################################################
##### build-company: Tianjin Hualai Technology Co., Ltd. #####
##### build-sha1: c556ef357b56857b9792c395dca192e8a22278c6 #####
######################################################################
Top of RAM usable for U-Boot at: 88000000
Reserving 446k for U-Boot at: 87f90000
Reserving 32800k for malloc() at: 85f88000
Reserving 32 Bytes for Board Info at: 85f87fe0
Reserving 124 Bytes for Global Data at: 85f87f64
Reserving 128k for boot params() at: 85f67f64
Stack Pointer at: 85f67f48
Now running in RAM - U-Boot at: 87f90000
serial_initialize done
mem_malloc_init done
MMC: MSC: 0
Using default environment
In: serial
Out: serial
Err: serial
gpio_request lable = red_gpio gpio = 39
Hit any key to stop autoboot: 0
SF: Detected XT25F128B, flash size: 16MB, manufacturer id: 0b
gpio_request lable = TF_cd_gpio gpio = 42
gpio_request lable = SD_power_gpio gpio = 46
[CMD8]: Error detected in status(0x18000)!
[CMD55]: Error detected in status(0x18000)!
[CMD1]: Error detected in status(0x18000)!
Card did not respond to voltage select!
SF: Detected XT25F128B, flash size: 16MB, manufacturer id: 0b
### JFFS2 loading 'upGradeFlag' to 0x85f67130
Scanning JFFS2 FS: . done.
find_inode failed for name=upGradeFlag
load: Failed to find inode
### JFFS2 LOAD ERROR<0> for upGradeFlag!
Removing MTD device #0 (nor0) with use count 7
SF: Detected XT25F128B, flash size: 16MB, manufacturer id: 0b
--->probe spend 6 ms
SF: 4653056 bytes @ 0x30000 Read: OK
--->read spend 1269 ms
## Loading kernel from FIT Image at 80600000 ...
Using 'conf' configuration
Verifying Hash Integrity ... sha256,rsa2048:secureboot-verity+ OK
Trying 'kernel' kernel subimage
Description: ingenict32 kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x8060355c
Data Size: 1465168 Bytes = 1.4 MiB
Architecture: MIPS
OS: Linux
Load Address: 0x80f00000
Entry Point: 0x80f00000
Hash algo: sha256
Hash value: e6b97ee1dbde680ceb0780ceca673957446fd8cfbd1222a9dcc8b00653d60690
Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 80600000 ...
Using 'conf' configuration
Trying 'ramdisk' ramdisk subimage
Description: ingenict32 ramdisk
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0x807691b8
Data Size: 2990080 Bytes = 2.9 MiB
Architecture: MIPS
OS: Linux
Load Address: 0x00000000
Entry Point: 0x87fd5730
Hash algo: sha256
Hash value: 29601002dc00c5b2c477cfa936993c8d2703c62f4a93f1fc812553ba8659ec47
Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 80600000 ...
Using 'conf' configuration
Trying 'fdt' fdt subimage
Description: ingenict32 dtb
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x806000c4
Data Size: 13232 Bytes = 12.9 KiB
Architecture: MIPS
Hash algo: sha256
Hash value: 12c8211b55820d31e3188fbe261ad80e52424355a3b08519d1d787669c1ace2a
Verifying Hash Integrity ... sha256+ OK
Loading fdt from 0x806000c4 to 0x83000000
Booting using the fdt blob at 0x83000000
Loading Kernel Image ... OK
Loading Ramdisk to 83d26000, end 84000000 ... OK
Loading Device Tree to 83d1f000, end 83d253af ... OK
Starting kernel ...
[ 0.000000] Linux version 4.4.94 (rocky@ubuntu) (gcc version 5.4.0 (Ingenic r3.3.7.mxu2-gcc540 memcpy memset memcmp memmove strcpy strlen only on mxu2 simd core fix02. 2024.12-19) ) #4 Thu Jun 19 10:18:58 CST 2025
[ 0.000000] Ingenic Kernel-4.4.94 version H20241120a
[ 0.000000] CPU0 RESET ERROR PC:0202801C
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00d00100 (Xburst)
[ 0.000000] FPU revision is: 00b70000
[ 0.000000] MIPS: machine is ingenic,zeratul
[ 0.000000] Warning!!!!! This version is not CI release version!!!!!
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 003e0000 @ 00010000 (usable)
[ 0.000000] memory: 00030000 @ 003f0000 (usable after init)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 05d00000 @ 00000000 (usable)
[ 0.000000] Initial ramdisk at: 0x83d26000 (2990080 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000005cfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005cfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000005cfffff]
[ 0.000000] cma: Reserved 12 MiB at 0x05000000
[ 0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] cache c0 reg is 20000000
[ 0.000000] Unified secondary cache 128kB 8-way, linesize 32 bytes.
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 23622
[ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=93M@0x0 rmem=35M@0x5d00000 init=/linuxrc rootfstype=squashfs root=/dev/ram0 ro mtdparts=sfc0_nor:192K(uboot),4544K(boot),5632K(system),5632K(back),320K(cfg),64K(provisioning) ramdisk_size=2920
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 74736K/95232K available (2958K kernel code, 138K rwdata, 864K rodata, 192K init, 89K bss, 8208K reserved, 12288K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:210
[ 0.000000] PRJ007 Clock Power Management Unit init!
[ 0.000000] Previous Boot Time is 3450068 us
[ 0.000000] clocksource: ingenic_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 1763180808952 ns
[ 0.000005] sched_clock: 64 bits at 1500kHz, resolution 666ns, wraps every 4398046510951ns
[ 0.008459] ERROR epc 0x202801c
[ 0.011567] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 0.101157] pid_max: default: 32768 minimum: 301
[ 0.105917] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.112556] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.121009] devtmpfs: initialized
[ 0.125087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.135033] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.141457] pinctrl core: initialized pinctrl subsystem
[ 0.147029] NET: Registered protocol family 16
[ 0.152646] ingenic pinctrl 10010000.pinctrl: 3 gpio chip add success, pins 96
[ 0.160417] ingenic pinctrl 10010000.pinctrl: ingenic pinctrl probe success
[ 0.168827] dmmu_init 807 PTRS_PER_PTE = 1024
[ 0.182775] ingenic-dma 13420000.dma: INGENIC SoC DMA initialized
[ 0.189117] usbcore: registered new interface driver usbfs
[ 0.194627] usbcore: registered new interface driver hub
[ 0.200049] usbcore: registered new device driver usb
[ 0.205259] inno phy probe success
[ 0.209652] clocksource: Switched to clocksource ingenic_clocksource
[ 0.216958] NET: Registered protocol family 2
[ 0.221813] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.228834] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.235261] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.241754] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.247622] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.254129] NET: Registered protocol family 1
[ 0.258641] Trying to unpack rootfs image as initramfs...
[ 0.264181] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 0.282486] Freeing initrd memory: 2920K
[ 0.287217] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.293177] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
[ 0.299939] NET: Registered protocol family 38
[ 0.304411] io scheduler noop registered
[ 0.308369] io scheduler cfq registered (default)
[ 0.313317] ingenic,PRJ007-pwm 13450000.pwm: PWM clk100k:500
[ 0.318993] ingenic,PRJ007-pwm 13450000.pwm: period_ns:max=1310700,min=41
[ 0.326453] vpu_node_num: 1radix0 probe success
[ 0.331186] vpu_node_num: 2helix0 success
[ 0.335636] 10031000.serial: ttyS1 at MMIO 0x10031000 (irq = 58, base_baud = 6562500) is a uart1
[ 0.344531] console [ttyS1] enabled
[ 0.344531] console [ttyS1] enabled
[ 0.351613] bootconsole [early0] disabled
[ 0.351613] bootconsole [early0] disabled
[ 0.360293] ingenic-trng 10072000.dtrng: ingenic HW dtrng Probe success!
[ 0.367991] brd: module loaded
[ 0.371783] TSensor enable auto tsRefi_func
[ 0.376495] @@@@ rsa driver ok(version H20250218a) @@@@@
[ 0.382605] ingenic-tcu 10002000.tcu: Ingenic TCU driver register completed ret = 0
[ 0.391556] ingenic-sfc 13440000.sfc0: Found Supported nor device, BE = 32K, id = b4018, name = XT25F128B
[ 0.401594] ingenic-sfc 13440000.sfc0: nor flash quad mode is set, now use quad mode!
[ 0.409699] ingenic-sfc 13440000.sfc0: nor flash now use 3bytes mode!
[ 0.416380] 6 cmdlinepart partitions found on MTD device sfc0_nor
[ 0.422685] Creating 6 MTD partitions on "sfc0_nor":
[ 0.427820] 0x000000000000-0x000000030000 : "uboot"
[ 0.433581] 0x000000030000-0x0000004a0000 : "boot"
[ 0.439246] 0x0000004a0000-0x000000a20000 : "system"
[ 0.445076] 0x000000a20000-0x000000fa0000 : "back"
[ 0.450781] 0x000000fa0000-0x000000ff0000 : "cfg"
[ 0.456342] 0x000000ff0000-0x000001000000 : "provisioning"
[ 0.462878] ingenic-sfc 13440000.sfc0: SPI NOR MTD LOAD OK
[ 0.468872] OTG CLK d139efe0
[ 0.472443] CPCCR CLK 1580
[ 0.688519] dwc2 13500000.otg: DWC OTG Controller
[ 0.693413] dwc2 13500000.otg: new USB bus registered, assigned bus number 1
[ 0.700757] dwc2 13500000.otg: irq 29, io mem 0x00000000
[ 0.706835] hub 1-0:1.0: USB hub found
[ 0.710773] hub 1-0:1.0: 1 port detected
[ 0.715261] ingenic-i2c 10050000.i2c: i2c0 clk is 400000.
[ 0.720972] ingenic-i2c 10050000.i2c: register i2c0 success.
[ 0.727468] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.736406] sdhci: Secure Digital Host Controller Interface driver
[ 0.742815] sdhci: Copyright(c) Pierre Ossman
[ 0.747530] gpio_group_name =gpb
[ 0.751058] ingenic,sdhci 13060000.msc: allocated mmc-pwrseq
[ 0.757963] ingenic,sdhci 13060000.msc: No vmmc regulator found
[ 0.764106] ingenic,sdhci 13060000.msc: No vqmmc regulator found
[ 0.818407] mmc0: SDHCI controller on ingenic-sdhci [13060000.msc] using ADMA
[ 0.825800] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 0.832791] mmc0: card inserted
[ 0.838229] gpio_group_name =gpc
[ 0.841760] ingenic,sdhci 13070000.msc: No vmmc regulator found
[ 0.847884] ingenic,sdhci 13070000.msc: No vqmmc regulator found
[ 0.869175] ====> mmc0, sdhci_irq 0x1 cmd NULL 0x0 0x502
[ 0.890858] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 0.908401] mmc1: SDHCI controller on ingenic-sdhci [13070000.msc] using ADMA
[ 0.915997] gate = d139efe0
[ 1.018865] reg alg: ecb(aes)
[ 1.022166] reg alg: cbc(aes)
[ 1.025353] ingenic aes[2] register ok.
[ 1.029680] reg alg: md5
[ 1.032774] reg alg: sha1
[ 1.035662] reg alg: sha224
[ 1.038909] reg alg: sha256
[ 1.041998] reg alg: sha384
[ 1.045064] reg alg: sha512
[ 1.048130] ingenic hash[6] register ok.
[ 1.052370] NET: Registered protocol family 17
[ 1.057855] soc_vpu probe success,version:1.0.0-03203fd46d
[ 1.066297] RAMDISK: squashfs filesystem found at block 0
[ 1.075045] RAMDISK: Loading 2917KiB [1 disk] into ram disk...
[ 1.083313] |
[ 1.087222] /
[ 1.091161] -
[ 1.095085] \
[ 1.099063] |
[ 1.103012] /
[ 1.106945] -
[ 1.110925] \
[ 1.114867] |
[ 1.118923] /
[ 1.124719] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 1.131767] -
[ 1.138881] \
[ 1.158937] |
[ 1.178912] /
[ 1.182839] -
[ 1.187867] \
[ 1.191938] |
[ 1.195883] /
[ 1.199853] -
[ 1.203794] \
[ 1.207717] |
[ 1.211697] /
[ 1.215634] -
[ 1.219613] \
[ 1.223555] |
[ 1.227583] /
[ 1.233403] mmc0: mmc_rescan_try_freq: trying to init card at 100000 Hz
[ 1.240445] -
[ 1.248834] done.
[ 1.265298] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[ 1.275714] devtmpfs: mounted
[ 1.279059] Freeing unused kernel memory: 192K
[ 1.607680] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 1.756976] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
[ 1.854229] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
fs_mgr: fs_mgr start...
[1970-01-01 00:00:01.879][INFO ] [localsdk_hwotp.c,0211] <>===================< SCB is status -> [enable] >==================<>
fs_mgr: crypt block device name: /dev/dm-0
fs_mgr: verity block device name: /dev/dm-1
[ 1.947766] mmc0: mmc_rescan_try_freq: trying to init card at 100000 Hz
fs_mgr: Verity success
fs_mgr: Mount /dev/block/by-name/system to /system success
[ 2.049073] @@@@ multi-process system init sucess (Board: PRJ007, Version: H20240814a) @@@
[ 2.095181] the codec_type = 0 !!!!!
[ 2.118415] @@@@@ inner codec power up@@@@@@
[ 2.398592] @@@@ audio driver ok(version H20240815a) @@@@@
[ 2.608443] @@@@ tx-isp-probe ok (version H20250305a), compiler date: Apr 10 2025 17:33:11 @@@@@
[ 2.619616] usbcore: registered new interface driver usb_ch341
[ 2.625651] ch341: USB serial driver for ch340, ch341, etc.
[ 2.631453] ch341: V1.6 On 2020.12.23
[ 2.690269] <TNPU> Alloc 0xa00000 from CMA as tnpu pool memory.
[ 2.696473] <TNPU> tnna_clk=1200MHz, v0_clk=600MHz, default=600MHz
[ 2.703418] <TNPU> Successful insmod, version=0x10208.
[ 2.732280] timer 1 probe OK!!
[ 2.735586] timer 2 probe OK!!
[ 2.739281] motor_probe, [1400]
[ 2.742535] part_number: HZF-24BYJ48
[ 2.746227] pwm_tbl_cw:
[ 2.748791] 0x09 0x01 0x03 0x02 0x06 0x04 0x0c 0x08
[ 2.754035] pwm_pins:
[ 2.756569] 0x3e 0x3c 0x3b 0x30
[ 2.759743] steps-one-circle:4096
[ 2.763345] total-steps:2500
[ 2.766317] boundary-steps:50
[ 2.769381] attac-timer:1
[ 2.772085] index:0
[ 2.774248] speed-step:200
[ 2.778313] motor_probe success.
[ 2.781741] motor_probe, [1400]
[ 2.784989] part_number: HZF-24BYJ48
[ 2.788693] pwm_tbl_cw:
[ 2.791226] 0x09 0x01 0x03 0x02 0x06 0x04 0x0c 0x08
[ 2.796471] pwm_pins:
[ 2.799035] 0x2d 0x29 0x3a 0x39
[ 2.802188] steps-one-circle:4096
[ 2.805791] total-steps:600
[ 2.808679] boundary-steps:50
[ 2.811742] attac-timer:2
[ 2.814444] index:1
[ 2.816607] speed-step:200
[ 2.820771] motor_probe success.
[ 2.844316] @@@@ sinfo driver ok(version H20240801a) @@@@@
Executing US specific operations...
[ 3.165216] [atbm_log]:platform_init(252)
[ 3.169492] [atbm_log]:cmd_init next c0640e40 c0640e40
[ 3.174809] [atbm_log]:SVN_VER=4154,DPLL_CLOCK=40,wifi6_40M_lite,BUILD_TIME=2025-05-09_16:55:05
[ 3.183817] [atbm_log]:----drvier support chip Cronus
[ 3.708223] ingenic,sdhci 13070000.msc: card insert manually
[ 3.714098] ====> mmc1 jzmmc_manual_detect tasklet finish
[ 3.819486] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 3.858467] mmc1 switch clock =f810800e
[ 3.862453] mmc1 switch clock =f811000e
[ 3.879161] mmc1 switch clock =f811000e
[ 3.885344] mmc1 switch clock =f811000e
[ 3.905789] mmc1 switch clock =f811000e
[ 3.909780] ====> set tx phase
[ 3.913293] mmc1 switch clock =80110009
[ 3.917262] ====> set tx phase
[ 3.923572] mmc1 switch clock =a8110009
[ 3.927540] ====> set tx phase
[ 3.931328] mmc1 switch clock =a8110009
[ 3.935290] ====> set tx phase
[ 3.940894] mmc1: new high speed SDIO card at address 0001
[ 3.946663] mmc_debug_enabled = 0
[ 3.959075] [atbm_log]:Probe called
[ 3.962683] [atbm_log]:host enable irq
[ 3.966556] [atbm_log]:sdio clock(25000000)
[ 3.973190] [atbm_log]:atbm_sdio_probe:v12
[ 3.977455] [atbm_log]:Allocated hw_priv @ 83ea1180
[ 3.983195] [atbm_log]: wait_event_interruptible from send_prbresp_wq
[ 3.990963] [atbm_log]:atbm_get_chiptype, chipver=0x30, g_wifi_chip_type[17]
[ 3.998251] [atbm_log]:[BH] register.
[ 4.002491] [atbm_log]:atbmwifi INIT_WORK enable
[ 4.007613] [atbm_log]:atbmwifi INIT_WORK enable
[ 4.013901] [atbm_log]:atbm_get_chiptype, chipver=0x30, g_wifi_chip_type[17]
[ 4.021217] [atbm_log]:atbm_before_load_firmware++
[ 4.026231] [atbm_log]:atbm_before_load_firmware:do not set config to smu
[ 4.033606] [atbm_log]:mmc1 has been attached
[ 4.076538] [atbm_log]:atbm_before_load_firmware:0xab0016c = [34800000]
[ 4.083823] [atbm_log]:atbm_before_load_firmware:0xab0016c = [34800000]
[ 4.092290] [atbm_log]:reset val(2)
[ 4.096612] [atbm_log]:after reset(0)
[ 4.100431] [atbm_log]:atbm_start_load_firmware++
[ 4.105293] [atbm_log]:
[ 4.105293] ======>>> load WIFI+BLE firmware <<<======
[ 4.105293]
[ 4.114659] [atbm_log]:firmware_usb_wifi_bt_comb_ocea.h
[ 4.120067] atbm_load_wifi_bt_firmware: fwhdr->flags 34353678 sram_addr a18400,chip_cat 1
[ 4.128525] [atbm_log]:START DOWNLOAD ICCM=========
[ 4.134495] [atbm_log]:atbm_load_firmware_generic: addr 60000: len 20000
Updating device time to:
Thu Jul 3 07:42:32 UTC 2025
#######################
# IS USER STATUS #
#######################
[ 4.250764] random: nonblocking pool is initialized
[ 4.272514] [atbm_log]:START DOWNLOAD DCCM=========
[ 4.277570] [atbm_log]:atbm_load_firmware_generic: addr 800000: len 9000
[ 4.297549] [atbm_log]:START DOWNLOAD SRAM=========
[ 4.302619] [atbm_log]:atbm_load_firmware_generic: addr a18400: len 7a64
[ 4.320687] [atbm_log]:atbm_after_load_firmware++
[ 4.348434] [atbm_log]:ATBM_HIFREG_CONFIG_REG_ID(4005600)
[ 4.364205] [atbm_log]:firmwareCap f1e9
[ 4.368171] [atbm_log]:firmwareCap2 138c
[ 4.372237] [atbm_log]:wsm_caps.firmwareCap 138cf1e9 16
[ 4.377473] [atbm_log]:apollo wifi WSM init done.
[ 4.377473] Input buffers: 34 x 1632 bytes
[ 4.377473] Hardware: 7.21
[ 4.377473] WSM firmware [=MODEM=DPLL40M+BLE+plat=13 2GHZ Apr 10 2025 21:15:05 Rx:5 16 Tx:34 8], ver: 24573, build: 7043, api: 1060, cap: 0x138CF1E9 Config[31010] expection a05bdc, ep0 cmd addr a13508 NumOfStations[0x10] NumOfInterfaces[3]
[ 4.412367] [atbm_log]:CAPABILITIES_ATBM_PRIVATE_IE [0]
[ 4.417858] [atbm_log]:CAPABILITIES_NVR_IPC [0]
[ 4.422632] [atbm_log]:CAPABILITIES_NO_CONFIRM [1]
[ 4.427675] [atbm_log]:CAPABILITIES_WOW [0]
[ 4.432089] [atbm_log]:CAPABILITIES_NO_BACKOFF [1]
[ 4.437131] [atbm_log]:CAPABILITIES_CFO [1]
[ 4.441546] [atbm_log]:CAPABILITIES_CHIP_FLAG [1]
[ 4.446494] [atbm_log]:CAPABILITIES_TXCAL [1]
[ 4.451089] [atbm_log]:CAPABILITIES_HIF_TRACE [0]
[ 4.456041] [atbm_log]:CAPABILITIES_SMARTCONFIG [0]
[ 4.461177] [atbm_log]:CAPABILITIES_ETF [1]
[ 4.465589] [atbm_log]:CAPABILITIES_BLE [1]
[ 4.470004] [atbm_log]:CAPABILITIES_40M [1]
[ 4.474417] [atbm_log]:CAPABILITIES_LDPC [1]
[ 4.478921] [atbm_log]:CAPABILITIES_NAV_ENABLE [0]
[ 4.483959] [atbm_log]:CAPABILITIES_USE_IPC [1]
[ 4.488738] [atbm_log]:CAPABILITIES_OUTER_PA [0]
[ 4.493599] [atbm_log]:CAPABILITIES_WFA [0]
[ 4.498013] [atbm_log]:CAPABILITIES_EAP_GROUP_REKEY [0]
[ 4.503506] [atbm_log]:CAPABILITIES_RTS_LONG_DURATION [1]
[ 4.509178] [atbm_log]:CAPABILITIES_TX_CFO_PPM_CORRECTION [1]
[ 4.515208] [atbm_log]:CAPABILITIES_RXCAL [1]
[ 4.519803] [atbm_log]:CAPABILITIES_HW_CHECKSUM [0]
[ 4.524931] [atbm_log]:CAPABILITIES_80211_TO_8023 [0]
[ 4.530246] [atbm_log]:CAPABILITIES_NEW_CHIPER [1]
[ 4.535287] [atbm_log]:EXCAPABILITIES_BLE_50 [0]
[ 4.540151] [atbm_log]:EXCAPABILITIES_WIFI6 [1]
[ 4.544833] [atbm_log]:CONFIG_PRODUCT_TEST_USE_FEATURE_ID [1]
[ 4.550775] [atbm_log]:CONFIG_PRODUCT_TEST_USE_GOLDEN_LED [1]
[ 4.556763] [atbm_log]:atbm_sdio_rx_thread
[ 4.563962] [atbm_log]:set_block_size=256
[ 4.568113] [atbm_log]:mdelay wait wsm_startup_done !!
[ 4.574663] [atbm_log]:atbm_sdio_sg_thread
[ 4.578987] [atbm_log]:atbm_sdio_tx_thread
[ 4.588571] [atbm_log]:rx timeout
[ 4.631235] [atbm_log]:wsm_generic_confirm:status(2)
[ 4.636386] [atbm_log]:<WARNING> wsm_write_mib fail !!! mibId=4132
[ 4.643602] [atbm_log]:apollo wifi : can't open /data/.mac.info
[ 4.649750] [atbm_log]:wlan0 mac0:�
[ 4.653811] [atbm_log]:efuse data is [0x5,0x38,0x5,0x6,0x6,0x25,0x0,0x0,0xbc:0xad:0xae:0xc9:0x82:0xb1]
[ 4.663459] [atbm_log]:5G deltagain [0,63,0,1,3,0,62,61,61,59]
[ 4.670335] [atbm_log]:enable sg
[ 4.673693] [atbm_log]:[wlan0] has been disabled
[ 4.679554] [atbm_log]:ble start
[ 4.683009] [atbm_log]:[phy0-ble_recv] start
[ 4.687436] [atbm_log]:ble subscribe
[ 4.691561] [atbm_log]:[phy0-ble_xmit] start
[ 4.696110] [atbm_log]:ble_platform_probe(83eb1100)
[ 4.701596] [atbm_log]:is registered as 'phy0'
[ 4.707659] [atbm_log]:crystal:2
[ 4.711321] [atbm_log]:apollo wifi : can't open /tmp/atbm_txpwer_dcxo_cfg.txt
[ 4.718723] [atbm_log]:not support auto cfo!
[ 4.724200] [atbm_log]:0,target_or_delta=1
[ 4.728469] [atbm_log]:1,b_1M_2M=210
[ 4.732163] [atbm_log]:2,b_5_5M_11M=210
[ 4.736125] [atbm_log]:3,g_6M_n_6_5M=210
[ 4.740183] [atbm_log]:4,g_9M=200
[ 4.743607] [atbm_log]:5,g_12M_n_13M=190
[ 4.747660] [atbm_log]:6,g_18M_n_19_5M=190
[ 4.751898] [atbm_log]:7,g_24M_n_26M=190
[ 4.755950] [atbm_log]:8,g_36M_n_39M=190
[ 4.760008] [atbm_log]:9,g_48M_n_52M=190
[ 4.764059] [atbm_log]:10,g_54M_n_58_5M=180
[ 4.768383] [atbm_log]:11,n_65M=180
[ 4.771993] [atbm_log]:12,VHT_MCS0=210
[ 4.775866] [atbm_log]:13,VHT_MCS1=190
[ 4.779743] [atbm_log]:14,VHT_MCS2=190
[ 4.783616] [atbm_log]:15,VHT_MCS3=190
[ 4.787489] [atbm_log]:16,VHT_MCS4=190
[ 4.791367] [atbm_log]:17,VHT_MCS5=190
[ 4.795240] [atbm_log]:18,VHT_MCS6=180
[ 4.799117] [atbm_log]:19,VHT_MCS7=170
[ 4.802991] [atbm_log]:20,VHT_MCS8=170
[ 4.806862] [atbm_log]:21,VHT_MCS9=170
[ 4.810739] [atbm_log]:22,HE-SU_MCS0=210
[ 4.814791] [atbm_log]:23,HE-SU_MCS1=190
[ 4.818845] [atbm_log]:24,HE-SU_MCS2=190
[ 4.822897] [atbm_log]:25,HE-SU_MCS3=190
[ 4.826948] [atbm_log]:26,HE-SU_MCS4=190
[ 4.831007] [atbm_log]:27,HE-SU_MCS5=190
[ 4.835060] [atbm_log]:28,HE-SU_MCS6=180
[ 4.839119] [atbm_log]:29,HE-SU_MCS7=180
[ 4.843171] [atbm_log]:30,HE-SU_MCS8=170
[ 4.847223] [atbm_log]:31,HE-SU_MCS9=170
[ 4.851277] [atbm_log]:32,HE-SU_MCS10=160
[ 4.855422] [atbm_log]:33,HE-SU_MCS11=160
[ 4.859568] [atbm_log]:34,g_6M_n_6_5M_40M=200
[ 4.864067] [atbm_log]:35,g_9M_40M=190
[ 4.867941] [atbm_log]:36,g_12M_n_13M_40M=190
[ 4.872447] [atbm_log]:37,g_18M_n_19_5M_40M=190
[ 4.877131] [atbm_log]:38,g_24M_n_26M_40M=190
[ 4.881637] [atbm_log]:39,g_36M_n_39M_40M=190
[ 4.886139] [atbm_log]:40,g_48M_n_52M_40M=190
[ 4.890644] [atbm_log]:41,g_54M_n_58_5M_40M=180
[ 4.895325] [atbm_log]:42,n_65M_40M=170
[ 4.899290] [atbm_log]:43,VHT_MCS0_40M=200
[ 4.903524] [atbm_log]:44,VHT_MCS1_40M=190
[ 4.907757] [atbm_log]:45,VHT_MCS2_40M=190
[ 4.911995] [atbm_log]:46,VHT_MCS3_40M=190
[ 4.916226] [atbm_log]:47,VHT_MCS4_40M=190
[ 4.920463] [atbm_log]:48,VHT_MCS5_40M=190
[ 4.924696] [atbm_log]:49,VHT_MCS6_40M=180
[ 4.928933] [atbm_log]:50,VHT_MCS7_40M=170
[ 4.933165] [atbm_log]:51,VHT_MCS8_40M=170
[ 4.937396] [atbm_log]:52,VHT_MCS9_40M=170
[ 4.941634] [atbm_log]:53,HE-SU_MCS0_40M=200
[ 4.946046] [atbm_log]:54,HE-SU_MCS1_40M=190
[ 4.950462] [atbm_log]:55,HE-SU_MCS2_40M=190
[ 4.954875] [atbm_log]:56,HE-SU_MCS3_40M=190
[ 4.959289] [atbm_log]:57,HE-SU_MCS4_40M=190
[ 4.963699] [atbm_log]:58,HE-SU_MCS5_40M=190
[ 4.968113] [atbm_log]:59,HE-SU_MCS6_40M=180
[ 4.972526] [atbm_log]:60,HE-SU_MCS7_40M=170
[ 4.976937] [atbm_log]:61,HE-SU_MCS8_40M=170
[ 4.981355] [atbm_log]:62,HE-SU_MCS9_40M=170
[ 4.985767] [atbm_log]:63,HE-SU_MCS10_40M=160
[ 4.990271] [atbm_log]:64,HE-SU_MCS11_40M=160
[ 5.002481] [atbm_log]:0,target_or_delta=1
[ 5.006723] [atbm_log]:1,g_6M_n_6_5M=200
[ 5.010807] [atbm_log]:2,g_9M=190
[ 5.014230] [atbm_log]:3,g_12M_n_13M=190
[ 5.018282] [atbm_log]:4,g_18M_n_19_5M=180
[ 5.022519] [atbm_log]:5,g_24M_n_26M=180
[ 5.026573] [atbm_log]:6,g_36M_n_39M=170
[ 5.030631] [atbm_log]:7,g_48M_n_52M=170
[ 5.034684] [atbm_log]:8,g_54M_n_58_5M=160
[ 5.038919] [atbm_log]:9,n_65M=160
[ 5.042433] [atbm_log]:10,VHT_MCS0=200
[ 5.046305] [atbm_log]:11,VHT_MCS1=190
[ 5.050182] [atbm_log]:12,VHT_MCS2=180
[ 5.054053] [atbm_log]:13,VHT_MCS3=180
[ 5.057925] [atbm_log]:14,VHT_MCS4=170
[ 5.061801] [atbm_log]:15,VHT_MCS5=170
[ 5.065675] [atbm_log]:16,VHT_MCS6=160
[ 5.069551] [atbm_log]:17,VHT_MCS7=160
[ 5.073421] [atbm_log]:18,VHT_MCS8=160
[ 5.077295] [atbm_log]:19,VHT_MCS9=150
[ 5.081174] [atbm_log]:20,HE-SU_MCS0=200
[ 5.085225] [atbm_log]:21,HE-SU_MCS1=190
[ 5.089283] [atbm_log]:22,HE-SU_MCS2=180
[ 5.093336] [atbm_log]:23,HE-SU_MCS3=180
[ 5.097389] [atbm_log]:24,HE-SU_MCS4=170
[ 5.101448] [atbm_log]:25,HE-SU_MCS5=170
[ 5.105501] [atbm_log]:26,HE-SU_MCS6=160
[ 5.109559] [atbm_log]:27,HE-SU_MCS7=160
[ 5.113612] [atbm_log]:28,HE-SU_MCS8=160
[ 5.117663] [atbm_log]:29,HE-SU_MCS9=150
[ 5.121719] [atbm_log]:30,HE-SU_MCS10=140
[ 5.125864] [atbm_log]:31,HE-SU_MCS11=130
[ 5.130011] [atbm_log]:32,g_6M_n_6_5M_40M=190
[ 5.134513] [atbm_log]:33,g_9M_40M=170
[ 5.138386] [atbm_log]:34,g_12M_n_13M_40M=170
[ 5.142893] [atbm_log]:35,g_18M_n_19_5M_40M=160
[ 5.147575] [atbm_log]:36,g_24M_n_26M_40M=160
[ 5.152080] [atbm_log]:37,g_36M_n_39M_40M=150
[ 5.156583] [atbm_log]:38,g_48M_n_52M_40M=150
[ 5.161088] [atbm_log]:39,g_54M_n_58_5M_40M=140
[ 5.165771] [atbm_log]:40,n_65M_40M=130
[ 5.169737] [atbm_log]:41,VHT_MCS0_40M=190
[ 5.173969] [atbm_log]:42,VHT_MCS1_40M=170
[ 5.178201] [atbm_log]:43,VHT_MCS2_40M=160
[ 5.182437] [atbm_log]:44,VHT_MCS3_40M=160
[ 5.186669] [atbm_log]:45,VHT_MCS4_40M=150
[ 5.190906] [atbm_log]:46,VHT_MCS5_40M=150
[ 5.195139] [atbm_log]:47,VHT_MCS6_40M=140
[ 5.199376] [atbm_log]:48,VHT_MCS7_40M=130
[ 5.203609] [atbm_log]:49,VHT_MCS8_40M=110
[ 5.207843] [atbm_log]:50,VHT_MCS9_40M=110
[ 5.212083] [atbm_log]:51,HE-SU_MCS0_40M=190
[ 5.216496] [atbm_log]:52,HE-SU_MCS1_40M=170
[ 5.220912] [atbm_log]:53,HE-SU_MCS2_40M=160
[ 5.225322] [atbm_log]:54,HE-SU_MCS3_40M=160
[ 5.229738] [atbm_log]:55,HE-SU_MCS4_40M=150
[ 5.234148] [atbm_log]:56,HE-SU_MCS5_40M=150
[ 5.238565] [atbm_log]:57,HE-SU_MCS6_40M=140
[ 5.242979] [atbm_log]:58,HE-SU_MCS7_40M=130
[ 5.247389] [atbm_log]:59,HE-SU_MCS8_40M=110
[ 5.251805] [atbm_log]:60,HE-SU_MCS9_40M=110
[ 5.256218] [atbm_log]:61,HE-SU_MCS10_40M=80
[ 5.260633] [atbm_log]:62,HE-SU_MCS11_40M=80
[ 5.272295] [atbm_log]:get chip id [2][0][0]
[ 5.276805] [atbm_log]:current chiptype ATBM6162-S
[ 5.281869] [atbm_log]:default country code:CN,support channel=13
[ 5.288168] [atbm_log]:Use an internal power amplifier!
[ 5.293575] [atbm_log]:[atbm_wtd]:set wtd_probe = 1
s:Bus 001 Device 001: ID 1d6b:0002
line_num:1
[FC] not found usb store
[FC] Test.tar no exist
[FC] In [user] mode!
kernel.core_pattern = |/system/bin/ucoredmp_collector.sh --pid %p --signal %s --name %e --time %t --output-dir /media/mmc/cores
kernel.core_pipe_limit = 1
net.unix.max_dgram_qlen = 128
fs_mgr: fs_mgr start...
[2025-07-03 07:42:33.754][INFO ] [localsdk_hwotp.c,0211] <>===================< SCB is status -> [enable] >==================<>
fs_mgr: crypt block device name: /dev/dm-2
fs_mgr: verity block device name: /dev/dm-3
fs_mgr: Not a valid squashfs filesystem
fs_mgr: Failed to get squashfs fs size on /dev/dm-2.
fs_mgr: Could not get target device size.
fs_mgr: Verity fail, -1
########## start_edgeai not found xxxxxxxxx ##########
########## personvehiclepetDet-800K.mgk not found xxxxxxxxx ##########
add tb ld library pahth
[ 6.405575] ash (176): drop_caches: 1
Welcome to t32
t32 login:
Created
May 20, 2026 20:26
-
-
Save gtxaspec/3fe39aeb26e1944da395e5b86cdd0b07 to your computer and use it in GitHub Desktop.
wyze pan v4 bootlog
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment