verNANDo57

Workarounds for building R on 8GB RAM environment:

1. At the start of the build:
[ 99% 138/139] /mnt/ssd/lineage/out/soong/.bootstrap/bin/soong_build /mnt/ssd/lineage/out/soong/build.ninja
This used to take around 30mins, after enabling zram now it takes around 30secs (thanks to @kdrag0n for the zram idea) which is on par with what happens in 16GB RAM building environments

sudo apt install zram-config for installing zram-config package
sudo nano /etc/fstab and add a # in front of the swap disk if you have one and then reboot
After booting cat /proc/swaps to check if zram is enabled or not

andrebrait

Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.

Note: many newer Keychron keyboards use QMK as firmware and most tips here do not apply to them. Maybe the ones related to Bluetooth can be useful, but everything related to Apple's keyboard module (hid_apple) on Linux, won't work. As far as I know, all QMK-based boards use the hid_generic module instead. Examples of QMK-based boards are: Q, Q-Pro, V, K-Pro, etc.

Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.

Make Fn + F-keys work (NOT FOR QMK-BASED BOARDS)

Older Keychron keyboards (those not based on QMK) use the hid_apple driver on Linux, even in the Windows/Android mode, both in Bluetooth and Wired modes.

timetorock

/*  jQuery Nice Select - v1.1.0
https://github.com/hernansartorio/jquery-nice-select
Made by Hernán Sartorio  */

(function($) {

    $.fn.niceSelect = function(method) {

        // Methods
        if (typeof method == 'string') {

mohanpedala

Table of Contents

• set -e, -u, -x, -o pipefail
• set -e
• set -x
• set -u
• set -o pipefail
• Setting IFS
• Original Reference

set -e, -u, -x, -o pipefail

Brainiarc7

silly gist hack, why do we need you? :(

2E0PGS

If your running a x64 bit Ubuntu or other Linux and find USB transfers hang at the end apply this fix:

echo $((16*1024*1024)) > /proc/sys/vm/dirty_background_bytes
echo $((48*1024*1024)) > /proc/sys/vm/dirty_bytes

I suggest you edit your /etc/rc.local file to make this change persistant across reboots.

sudo nano /etc/rc.local

weibeld

# Set a Bash prompt that includes the exit code of the last executed command.
#
# Setup: paste the content of this file to ~/.bashrc, or source this file from
# ~/.bashrc (make sure ~/.bashrc is sourced by ~/.bash_profile or ~/.profile)
#
# Daniel Weibel <[email protected]> October 2015
#------------------------------------------------------------------------------#

# Command that Bash executes just before displaying a prompt
export PROMPT_COMMAND=set_prompt

sneetsher

#!/bin/bash
set -e

if [ $UID -ne 0 ]
then
    sudo $0
fi

readonly BAT_LIMIT_PATH=/sys/devices/platform/sony-laptop/battery_care_limiter
readonly USB_CHARGE_PATH=/sys/devices/platform/sony-laptop/usb_charge

goodevilgenius

#!/bin/bash

# Gist: 11375877
# Url: https://gist.github.com/goodevilgenius/11375877
#
# All memcache functions are supported.
# 
# Can also be sourced from other scripts, e.g.
#    source membash.sh
#    MCSERVER="localhost"

nelstrom

plugin
    naming convention: name_of_plugin.vim
    these files are sourced for all file types

doc
    naming convention: name_of_plugin.txt
    these files document the functionality of a plugin

color
    naming convention: name_of_colorscheme.vim