-
-
Save jlongman/a7a56241506681083d9b939828716dd6 to your computer and use it in GitHub Desktop.
begin remote | |
name seiki | |
bits 16 | |
flags SPACE_ENC|CONST_LENGTH | |
eps 30 | |
aeps 100 | |
header 9046 4428 | |
one 596 1606 | |
zero 596 490 | |
ptrail 596 | |
repeat 9053 2175 | |
pre_data_bits 16 | |
pre_data 0x40BE | |
gap 107838 | |
toggle_bit_mask 0x0 | |
begin codes | |
KEY_POWER 0x629D | |
KEY_TV 0x28D7 | |
KEY_SLEEP 0x8877 | |
KEY_1 0x807F | |
KEY_2 0x40BF | |
KEY_3 0xC03F | |
KEY_4 0x20DF | |
KEY_5 0xA05F | |
KEY_6 0x609F | |
KEY_7 0xE01F | |
KEY_8 0x10EF | |
KEY_9 0x906F | |
KEY_0 0x00FF | |
KEY_MINUS 0x42BD | |
KEY_VOLUMEUP 0x30CF | |
KEY_VOLUMEDOWN 0x9867 | |
KEY_CHANNELUP 0xF00F | |
KEY_CHANNELDOWN 0x5AA5 | |
KEY_MUTE 0x32CD | |
KEY_MENU 0xA25D | |
KEY_CLOSECD 0xDA25 | |
KEY_INFO 0xF20D | |
KEY_UP 0x12ED | |
KEY_DOWN 0xB24D | |
KEY_OK 0x52AD | |
KEY_RIGHT 0x926D | |
KEY_LEFT 0x728D | |
KEY_ENTER 0xA857 | |
KEY_CHANNEL 0x22DD | |
KEY_EXIT 0xB04F | |
KEY_A 0xEA15 | |
KEY_B 0x02FD | |
KEY_C 0xAA55 | |
KEY_D 0x6897 | |
KEY_PLAYPAUSE 0x6A95 | |
KEY_REWIND 0x48B7 | |
KEY_FASTFORWARD 0x8A75 | |
KEY_STOP 0xE817 | |
KEY_NEXT 0x08F7 | |
KEY_PREVIOUS 0xCA35 | |
KEY_INPUT_SOURCE 0xD22D | |
KEY_SOUND_MODE 0xC23D | |
KEY_PICTURE_MODE 0xE21D | |
KEY_FREEZE 0x02FD | |
KEY_FAVE 0x9A65 | |
KEY_MTS 0x0AF5 | |
KEY_CC 0x2AD5 | |
end codes | |
end remote |
KEY_5 0xA05F
- all the numbers have a 0 in second position, F in last,
- the other two numbers total F
- try all the variations
KEY_827D - return to last channel
testing variations with 2 in second position, D in last.
This would be a lot easier if my IR receiver had arrived. :(
KEY_C23D - sound mode
KEY_D22D - input source menu
Note this starts on the current source, and will wrap the menu so there's no way to go from an unknown state to a known state - without using the USB button and then switching to a known input. Still haven't found the USB button.
KEY_E21D - picture mode
KEY_02FD - freeze frame
KEY_9A65 - favourite, relative, hit quickly to toggle, no way to get to known state (maybe a scan resets all?)
KEY_0AF5 - MTS audio track selection, toggles when selected again quickly, relative, changes per channel, no way to get to known state
KEY_2AD5 - closed captioning mode, toggles when selected again quickly, relative, no way to get to known state
Note: changing the input is missing and KEY_5 and KEY_8 are the same. This is the only repeated sequence.