Created
September 5, 2017 18:29
-
-
Save jmsaavedra/fb4b080580d2706c143c8aba2a293ab8 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -cstk500v2 -Pusb -e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xde:m -Ulfuse:w:0xff:m | |
| avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35 | |
| Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
| Copyright (c) 2007-2014 Joerg Wunsch | |
| System wide configuration file is "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf" | |
| User configuration file is "/Users/jmsaavedra/.avrduderc" | |
| User configuration file does not exist or is not a regular file, skipping | |
| Using Port : usb | |
| Using Programmer : stk500v2 | |
| avrdude: usbdev_open(): Found AVRISP mkII, serno: 000200129162 | |
| AVR Part : ATmega328P | |
| Chip Erase delay : 9000 us | |
| PAGEL : PD7 | |
| BS2 : PC2 | |
| RESET disposition : dedicated | |
| RETRY pulse : SCK | |
| serial program mode : yes | |
| parallel program mode : yes | |
| Timeout : 200 | |
| StabDelay : 100 | |
| CmdexeDelay : 25 | |
| SyncLoops : 32 | |
| ByteDelay : 0 | |
| PollIndex : 3 | |
| PollValue : 0x53 | |
| Memory Detail : | |
| Block Poll Page Polled | |
| Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
| ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
| eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff | |
| flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff | |
| lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
| signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
| Programmer Type : STK500V2 | |
| Description : Atmel STK500 Version 2.x firmware | |
| Programmer Model: AVRISP mkII | |
| Hardware Version: 1 | |
| Firmware Version Master : 1.10 | |
| Vtarget : 3.3 V | |
| SCK period : 8.00 us | |
| avrdude: AVR device initialized and ready to accept instructions | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: Device signature = 0x1e950f (probably m328p) | |
| avrdude: erasing chip | |
| avrdude: reading input file "0x3F" | |
| avrdude: writing lock (1 bytes): | |
| Writing | ################################################## | 100% 0.02s | |
| avrdude: 1 bytes of lock written | |
| avrdude: verifying lock memory against 0x3F: | |
| avrdude: load data lock data from input file 0x3F: | |
| avrdude: input file 0x3F contains 1 bytes | |
| avrdude: reading on-chip lock data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: WARNING: invalid value for unused bits in fuse "lock", should be set to 1 according to datasheet | |
| This behaviour is deprecated and will result in an error in future version | |
| You probably want to use 0xff instead of 0x3f (double check with your datasheet first). | |
| avrdude: 1 bytes of lock verified | |
| avrdude: reading input file "0x05" | |
| avrdude: writing efuse (1 bytes): | |
| Writing | ################################################## | 100% 0.01s | |
| avrdude: 1 bytes of efuse written | |
| avrdude: verifying efuse memory against 0x05: | |
| avrdude: load data efuse data from input file 0x05: | |
| avrdude: input file 0x05 contains 1 bytes | |
| avrdude: reading on-chip efuse data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: WARNING: invalid value for unused bits in fuse "efuse", should be set to 1 according to datasheet | |
| This behaviour is deprecated and will result in an error in future version | |
| You probably want to use 0xfd instead of 0x05 (double check with your datasheet first). | |
| avrdude: 1 bytes of efuse verified | |
| avrdude: reading input file "0xde" | |
| avrdude: writing hfuse (1 bytes): | |
| /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -cstk500v2 -Pusb -Uflash:w:/Users/jmsaavedra/Library/Arduino15/packages/adafruit/hardware/avr/1.4.9/bootloaders/optiboot/optiboot_atmega328.hex:i -Ulock:w:0x0F:m | |
| avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35 | |
| Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
| Copyright (c) 2007-2014 Joerg Wunsch | |
| System wide configuration file is "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf" | |
| User configuration file is "/Users/jmsaavedra/.avrduderc" | |
| User configuration file does not exist or is not a regular file, skipping | |
| Using Port : usb | |
| Using Programmer : stk500v2 | |
| avrdude: usbdev_open(): Found AVRISP mkII, serno: 000200129162 | |
| AVR Part : ATmega328P | |
| Chip Erase delay : 9000 us | |
| PAGEL : PD7 | |
| BS2 : PC2 | |
| RESET disposition : dedicated | |
| RETRY pulse : SCK | |
| serial program mode : yes | |
| parallel program mode : yes | |
| Timeout : 200 | |
| StabDelay : 100 | |
| CmdexeDelay : 25 | |
| SyncLoops : 32 | |
| ByteDelay : 0 | |
| PollIndex : 3 | |
| PollValue : 0x53 | |
| Memory Detail : | |
| Block Poll Page Polled | |
| Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
| ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
| eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff | |
| flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff | |
| lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 | |
| calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
| signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
| Programmer Type : STK500V2 | |
| Description : Atmel STK500 Version 2.x firmware | |
| Programmer Model: AVRISP mkII | |
| Hardware Version: 1 | |
| Firmware Version Master : 1.10 | |
| Vtarget : 3.3 V | |
| SCK period : 8.00 us | |
| Writing | ################################################## | 100% 0.01s | |
| avrdude: 1 bytes of hfuse written | |
| avrdude: verifying hfuse memory against 0xde: | |
| avrdude: load data hfuse data from input file 0xde: | |
| avrdude: input file 0xde contains 1 bytes | |
| avrdude: reading on-chip hfuse data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: 1 bytes of hfuse verified | |
| avrdude: reading input file "0xff" | |
| avrdude: writing lfuse (1 bytes): | |
| Writing | ################################################## | 100% 0.01s | |
| avrdude: 1 bytes of lfuse written | |
| avrdude: verifying lfuse memory against 0xff: | |
| avrdude: load data lfuse data from input file 0xff: | |
| avrdude: input file 0xff contains 1 bytes | |
| avrdude: reading on-chip lfuse data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: 1 bytes of lfuse verified | |
| avrdude done. Thank you. | |
| avrdude: AVR device initialized and ready to accept instructions | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: Device signature = 0x1e950f (probably m328p) | |
| avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed | |
| To disable this feature, specify the -D option. | |
| avrdude: erasing chip | |
| avrdude: reading input file "/Users/jmsaavedra/Library/Arduino15/packages/adafruit/hardware/avr/1.4.9/bootloaders/optiboot/optiboot_atmega328.hex" | |
| avrdude: writing flash (32768 bytes): | |
| Writing | ################################################## | 100% 0.00s | |
| avrdude: 32768 bytes of flash written | |
| avrdude: verifying flash memory against /Users/jmsaavedra/Library/Arduino15/packages/adafruit/hardware/avr/1.4.9/bootloaders/optiboot/optiboot_atmega328.hex: | |
| avrdude: load data flash data from input file /Users/jmsaavedra/Library/Arduino15/packages/adafruit/hardware/avr/1.4.9/bootloaders/optiboot/optiboot_atmega328.hex: | |
| avrdude: input file /Users/jmsaavedra/Library/Arduino15/packages/adafruit/hardware/avr/1.4.9/bootloaders/optiboot/optiboot_atmega328.hex contains 32768 bytes | |
| avrdude: reading on-chip flash data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: 32768 bytes of flash verified | |
| avrdude: reading input file "0x0F" | |
| avrdude: writing lock (1 bytes): | |
| Writing | ################################################## | 100% 0.02s | |
| avrdude: 1 bytes of lock written | |
| avrdude: verifying lock memory against 0x0F: | |
| avrdude: load data lock data from input file 0x0F: | |
| avrdude: input file 0x0F contains 1 bytes | |
| avrdude: reading on-chip lock data: | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: verifying ... | |
| avrdude: WARNING: invalid value for unused bits in fuse "lock", should be set to 1 according to datasheet | |
| This behaviour is deprecated and will result in an error in future version | |
| You probably want to use 0xcf instead of 0x0f (double check with your datasheet first). | |
| avrdude: 1 bytes of lock verified | |
| avrdude done. Thank you. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment