Baofeng BF888S default frequencies

BF888S_default_01012019.csv

Alright, my team and I use these everyday at work. They're, ok if you ask my opinion. I have difficulties hearing sometimes. Well I was given a UNIDEN SX409-3CKEM when my 888S came up missing. My issue is, how can I hear my coworkers on their 888S's on my UNIDEN? Please help and excuses my lack of techno-wizardry skills.

I just got brand new BF-888S's and a brand new UV-9R plus and can confirm that these work in getting the BF-888S's to speak to the UV-9R plus. Thanks a lot for this :)

At least channel 16 data here works in UV-5R both tx/rx , so a big thank you. After setting frequency, I just had to set T-CTCS for ToneSql value, and left the rest settings as they are. Other channels yet to test.

Hi, everybody.
I'm a little late... (grin) but maybe this is useful for someone...
I just saved the preset frequencies of the Baofeng BF-888s, using CHIRP, then copied each channel, from 1 to 16, to the channels 101 to 116 in my UV-5R. It's working perfectly.
Regards from Brazil

Location,Name,Frequency,Duplex,Offset,Tone,rToneFreq,cToneFreq,DtcsCode,DtcsPolarity,Mode,TStep,Skip,Comment,URCALL,RPT1CALL,RPT2CALL,DVCODE
0,,146.010000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,,
1,,452.125000,,0.000000,TSQL,69.3,69.3,023,NN,FM,5.00,,,,,,
2,,453.225000,,0.000000,TSQL,91.5,91.5,023,NN,FM,5.00,,,,,,
3,,454.325000,,0.000000,TSQL,136.5,136.5,023,NN,FM,5.00,,,,,,
4,,455.425000,,0.000000,TSQL,151.4,151.4,023,NN,FM,5.00,,,,,,
5,,456.525000,,0.000000,TSQL,192.8,192.8,023,NN,FM,5.00,,,,,,
6,,457.625000,,0.000000,TSQL,241.8,241.8,023,NN,FM,5.00,,,,,,
7,,458.725000,,0.000000,DTCS,88.5,88.5,025,NN,FM,5.00,,,,,,
8,,459.825000,,0.000000,DTCS,88.5,88.5,134,NN,FM,5.00,,,,,,
9,,461.925000,,0.000000,DTCS,88.5,88.5,274,NN,FM,5.00,,,,,,
10,,462.225000,,0.000000,DTCS,88.5,88.5,346,NN,FM,5.00,,,,,,
11,,463.325000,,0.000000,DTCS,88.5,88.5,503,NN,FM,5.00,,,,,,
12,,464.425000,,0.000000,DTCS,88.5,88.5,073,RR,FM,5.00,,,,,,
13,,465.525000,,0.000000,DTCS,88.5,88.5,703,RR,FM,5.00,,,,,,
14,,402.225000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
15,,437.425000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
16,,479.975000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
17,,138.550000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
18,,157.650000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
19,,172.750000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
20,,438.500000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
21,,155.700000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
101,,462.125000,,0.000000,TSQL,69.3,69.3,023,NN,FM,5.00,,,,,,
102,,462.225000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
103,,462.325000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
104,,462.425000,,0.000000,TSQL,103.5,103.5,023,NN,FM,5.00,,,,,,
105,,462.525000,,0.000000,TSQL,114.8,114.8,023,NN,FM,5.00,,,,,,
106,,462.625000,,0.000000,TSQL,127.3,127.3,023,NN,FM,5.00,,,,,,
107,,462.725000,,0.000000,TSQL,136.5,136.5,023,NN,FM,5.00,,,,,,
108,,462.825000,,0.000000,TSQL,162.2,162.2,023,NN,FM,5.00,,,,,,
109,,462.925000,,0.000000,DTCS,88.5,88.5,025,NN,FM,5.00,,,,,,
110,,463.025000,,0.000000,DTCS,88.5,88.5,051,NN,FM,5.00,,,,,,
111,,463.125000,,0.000000,DTCS,88.5,88.5,125,NN,FM,5.00,,,,,,
112,,463.225000,,0.000000,DTCS,88.5,88.5,155,RR,FM,5.00,,,,,,
113,,463.525000,,0.000000,DTCS,88.5,88.5,465,RR,FM,5.00,,,,,,
114,,450.225000,,0.000000,DTCS,88.5,88.5,023,NN,FM,5.00,,,,,,
115,,460.325000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
116,,469.950000,,0.000000,TSQL,203.5,203.5,023,NN,FM,5.00,,,,,,

I extracted these from the Baofeng BF-888S radio sets in my country (PK). Programmed these settings in my UV-82HP and it works perfectly on all 16 channels

Location	Name	Frequency	Duplex	Offset	Tone	rToneFreq	cToneFreq	DtcsCode	DtcsPolarity	RxDtcsCode	CrossMode	Mode	TStep	Skip	Power	Comment	URCALL	RPT1CALL	RPT2CALL	DVCODE
1		435.125		0	TSQL	88.5	69.3	23	NN	23	Tone->Tone	FM	5	S	5.0W
2		435.225		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
3		435.325		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
4		435.425		0	TSQL	88.5	103.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
5		435.525		0	TSQL	88.5	114.8	23	NN	23	Tone->Tone	FM	5	S	5.0W
6		435.625		0	TSQL	88.5	127.3	23	NN	23	Tone->Tone	FM	5	S	5.0W
7		435.725		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
8		435.825		0	TSQL	88.5	162.2	23	NN	23	Tone->Tone	FM	5	S	5.0W
9		435.925		0	DTCS	88.5	88.5	25	NN	23	Tone->Tone	FM	5	S	5.0W
10		438.025		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
11		438.125		0	DTCS	88.5	88.5	125	NN	23	Tone->Tone	FM	5	S	5.0W
12		438.225		0	DTCS	88.5	88.5	155	RR	23	Tone->Tone	FM	5	S	5.0W
13		438.325		0	DTCS	88.5	88.5	465	RR	23	Tone->Tone	FM	5	S	5.0W
14		438.425		0	DTCS	88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
15		438.525		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
16		440.95		0	TSQL	88.5	203.5	23	NN	23	Tone->Tone	FM	5	S	5.0W

Thanks for this

Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”.
I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.

I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”.
I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

Hello there. After checking the GT-5TP specs it says "Frequency Range: VHF 144-148MHz (TX/RX); UHF: 420-450MHz(TX/RX)".
Could this be purely a hardware issue on the GT-5TP side of things? None of the 888s listed frequencies are within the 420-450 range.

Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”. I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.

I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

I finally figured it out. The GT-5TP sold in the USA has a software block. The only way to use the above-listed frequencies is to jailbreak the phone back to default. So, in theory, if you revert to the original default you can transmit on the above-listed channels.
Regards,

anyone know the frequencies of vertel team talkie channels , need to connect with my uv5r please guide me.

Hi may know who have correct file to clone from BF-888S to UV-82 , Thanks.