ESPHome climate component for Electra AC (RC-3 IR remote)

ElectraClimate.h

#include "esphome.h"

static const char *TAG = "electra.climate";

typedef enum IRElectraMode {
    IRElectraModeCool = 0b001,
    IRElectraModeHeat = 0b010,
    IRElectraModeAuto = 0b011,
    IRElectraModeDry  = 0b100,
    IRElectraModeFan  = 0b101,
    IRElectraModeOff  = 0b111
} IRElectraMode;

typedef enum IRElectraFan {
    IRElectraFanLow    = 0b00,
    IRElectraFanMedium = 0b01,
    IRElectraFanHigh   = 0b10,
    IRElectraFanAuto   = 0b11
} IRElectraFan;

// That configuration has a total of 34 bits
//    33: Power bit, if this bit is ON, the A/C will toggle it's power.
// 32-30: Mode - Cool, heat etc.
// 29-28: Fan - Low, medium etc.
// 27-26: Zeros
//    25: Swing On/Off
//    24: iFeel On/Off
//    23: Zero
// 22-19: Temperature, where 15 is 0000, 30 is 1111
//    18: Sleep mode On/Off
// 17- 2: Zeros
//     1: One
//     0: Zero
typedef union ElectraCode {
    uint64_t num;
    struct {
        uint64_t zeros1 : 1;
        uint64_t ones1 : 1;
        uint64_t zeros2 : 16;
        uint64_t sleep : 1;
        uint64_t temperature : 4;
        uint64_t zeros3 : 1;
        uint64_t ifeel : 1;
        uint64_t swing : 1;
        uint64_t zeros4 : 2;
        uint64_t fan : 2;
        uint64_t mode : 3;
        uint64_t power : 1;
    };
} ElectraCode;

const uint8_t ELECTRA_TEMP_MIN = 16;  // Celsius
const uint8_t ELECTRA_TEMP_MAX = 30;  // Celsius

#define ELECTRA_TIME_UNIT 1000
#define ELECTRA_NUM_BITS 34

class ElectraClimate : public climate::Climate, public Component {
 public:
  void setup() override
  {
    if (this->sensor_) {
      this->sensor_->add_on_state_callback([this](float state) {
        this->current_temperature = state;

        // current temperature changed, publish state
        this->publish_state();
      });
      this->current_temperature = this->sensor_->state;
    } else
      this->current_temperature = NAN;

    // restore set points
    auto restore = this->restore_state_();
    if (restore.has_value()) {
      restore->apply(this);
    } else {
      // restore from defaults
      this->mode = climate::CLIMATE_MODE_AUTO;

      // initialize target temperature to some value so that it's not NAN
      this->target_temperature = roundf(this->current_temperature);
    }

    this->active_mode_ = this->mode;
  }

  void set_transmitter(remote_transmitter::RemoteTransmitterComponent *transmitter) {
    this->transmitter_ = transmitter;
  }

  void set_supports_cool(bool supports_cool) { this->supports_cool_ = supports_cool; }
  void set_supports_heat(bool supports_heat) { this->supports_heat_ = supports_heat; }
  void set_sensor(sensor::Sensor *sensor) { this->sensor_ = sensor; }

  /// Override control to change settings of the climate device
  void control(const climate::ClimateCall &call) override
  {
    if (call.get_mode().has_value())
      this->mode = *call.get_mode();
    if (call.get_target_temperature().has_value())
      this->target_temperature = *call.get_target_temperature();

    this->transmit_state_();
    this->publish_state();

    this->active_mode_ = this->mode;
  }

  /// Return the traits of this controller
  climate::ClimateTraits traits() override
  {
    auto traits = climate::ClimateTraits();
    traits.set_supports_current_temperature(this->sensor_ != nullptr);
    traits.set_supports_auto_mode(true);
    traits.set_supports_cool_mode(this->supports_cool_);
    traits.set_supports_heat_mode(this->supports_heat_);
    traits.set_supports_two_point_target_temperature(false);
    traits.set_supports_away(false);
    traits.set_visual_min_temperature(ELECTRA_TEMP_MIN);
    traits.set_visual_max_temperature(ELECTRA_TEMP_MAX);
    traits.set_visual_temperature_step(1);
    return traits;
  }

  /// Transmit the state of this climate controller via IR
  void transmit_state_()
  {
    ElectraCode code = { 0 };
    code.ones1 = 1;
    code.fan = IRElectraFan::IRElectraFanAuto;

    switch (this->mode) {
      case climate::CLIMATE_MODE_COOL:
        code.mode = IRElectraMode::IRElectraModeCool;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_HEAT:
        code.mode = IRElectraMode::IRElectraModeHeat;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_AUTO:
        code.mode = IRElectraMode::IRElectraModeAuto;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_OFF:
      default:
        code.mode = IRElectraMode::IRElectraModeOff;
        break;
    }

    auto temp = (uint8_t) roundf(clamp(this->target_temperature, ELECTRA_TEMP_MIN, ELECTRA_TEMP_MAX));
    code.temperature = temp - 15;

    ESP_LOGD(TAG, "Sending electra code: %lld", code.num);

    auto transmit = this->transmitter_->transmit();
    auto data = transmit.get_data();

    data->set_carrier_frequency(38000);
    uint16_t repeat = 3;

    for (uint16_t r = 0; r < repeat; r++) {
      // Header
      data->mark(3 * ELECTRA_TIME_UNIT);
      uint16_t next_value = 3 * ELECTRA_TIME_UNIT;
      bool is_next_space = true;

      // Data
      for (int j = ELECTRA_NUM_BITS - 1; j>=0; j--)
      {
        uint8_t bit = (code.num >> j) & 1;

        // if current index is SPACE
        if (is_next_space) {
          // one is one unit low, then one unit up
          // since we're pointing at SPACE, we should increase it by a unit
          // then add another MARK unit
          if (bit == 1) {
            data->space(next_value + ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = false;

          } else {
            // we need a MARK unit, then SPACE unit
            data->space(next_value);
            data->mark(ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = true;
          }

        } else {
          // current index is MARK
          
          // one is one unit low, then one unit up
          if (bit == 1) {
            data->mark(next_value);
            data->space(ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = false;

          } else {
            data->mark(next_value + ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = true;
          }
        }
      }

      // Last value must be SPACE
      data->space(next_value);
    }

    // Footer
    data->mark(4 * ELECTRA_TIME_UNIT);

    transmit.perform();
  }

  ClimateMode active_mode_;

  bool supports_cool_{true};
  bool supports_heat_{true};

  remote_transmitter::RemoteTransmitterComponent *transmitter_;
  sensor::Sensor *sensor_{nullptr};
};

I have solved the no temp control issue, add webui, then set temp from webui, then you can delete it, and control temp from home assistant.

Great. Can you post your ESPHome yaml file and ElectraClimate.h? can you be more detailed about the above procedure?

I have Made Some tweaks: 1. fixing the no temp control(hopefully), 2. removeing the non used fan off/on modes,3. add fan auto,4. added swing, 5. changed default max temp to 30C , 6. fixed the off command and 7. added the fan only and dry modes.
At some point custom componenets are supposed to be deprecated, so this shoud be made in to an extarenl component, but this is a project for another day.

#include "esphome.h"

static const char *TAG = "electra.climate";

typedef enum IRElectraMode {
    IRElectraModeCool = 0b001,
    IRElectraModeHeat = 0b010,
    IRElectraModeAuto = 0b011,
    IRElectraModeDry  = 0b100,
    IRElectraModeFan  = 0b101,
    IRElectraModeOff  = 0b001
} IRElectraMode;

typedef enum IRElectraFan {
    IRElectraFanLow    = 0b00,
    IRElectraFanMedium = 0b01,
    IRElectraFanHigh   = 0b10,
    IRElectraFanAuto   = 0b11
} IRElectraFan;

// That configuration has a total of 34 bits
//    33: Power bit, if this bit is ON, the A/C will toggle it's power.
// 32-30: Mode - Cool, heat etc.
// 29-28: Fan - Low, medium etc.
// 27-26: Zeros
//    25: Swing On/Off
//    24: iFeel On/Off
//    23: Zero
// 22-19: Temperature, where 15 is 0000, 30 is 1111
//    18: Sleep mode On/Off
// 17- 2: Zeros
//     1: One
//     0: Zero
typedef union ElectraCode {
    uint64_t num;
    struct {
        uint64_t zeros1 : 1;
        uint64_t ones1 : 1;
        uint64_t zeros2 : 16;
        uint64_t sleep : 1;
        uint64_t temperature : 4;
        uint64_t zeros3 : 1;
        uint64_t ifeel : 1;
        uint64_t swing : 1;
        uint64_t zeros4 : 2;
        uint64_t fan : 2;
        uint64_t mode : 3;
        uint64_t power : 1;
    };
} ElectraCode;

const uint8_t ELECTRA_TEMP_MIN = 16;  // Celsius
const uint8_t ELECTRA_TEMP_MAX = 30;  // Celsius
uint8_t target = 21;

#define ELECTRA_TIME_UNIT 1000
#define ELECTRA_NUM_BITS 34

class ElectraClimate : public climate::Climate, public Component {
 public:
  void setup() override
  {
    if (this->sensor_) {
      this->sensor_->add_on_state_callback([this](float state) {
        this->current_temperature = state;

        // current temperature changed, publish state
        this->publish_state();
      });
      this->current_temperature = this->sensor_->state;
    } else
      this->current_temperature = NAN;

    // restore set points
    auto restore = this->restore_state_();
    if (restore.has_value()) {
      restore->apply(this);
    } else {
      // restore from defaults to be off (before was CLIMATE_MODE_AUTO
      this->mode = climate::CLIMATE_MODE_OFF;

      this->swing_mode = climate::CLIMATE_SWING_OFF;

      // initialize target temperature to some value so that it's not NAN
      this->target_temperature = 24;
    }

    this->active_mode_ = this->mode;
  }
  

  void set_transmitter(remote_transmitter::RemoteTransmitterComponent *transmitter) {
    this->transmitter_ = transmitter;
  }

  void set_supported_cool(bool supported_cool) { this->supported_cool_ = supported_cool; }
  void set_supported_heat(bool supported_heat) { this->supported_heat_ = supported_heat; }
  void set_sensor(sensor::Sensor *sensor) { this->sensor_ = sensor; }

  /// Override control to change settings of the climate device
  void control(const climate::ClimateCall &call) override
  {
    if (call.get_mode().has_value())
      this->mode = *call.get_mode();
    if (call.get_target_temperature().has_value())
      this->target_temperature = *call.get_target_temperature();
//new
  if (call.get_fan_mode().has_value())
    this->fan_mode = *call.get_fan_mode();
// end new

// New: Handle Swing Mode
  if (call.get_swing_mode().has_value()) {
    if (*call.get_swing_mode() == climate::CLIMATE_SWING_OFF)
      this->swing_mode = climate::CLIMATE_SWING_OFF;  // Swing off
    else
      this->swing_mode = climate::CLIMATE_SWING_VERTICAL;   // Swing on
  }


    this->transmit_state_();
    this->publish_state();

    this->active_mode_ = this->mode;
  }

  /// Return the traits of this controller
/*   climate::ClimateTraits traits() override
  {
    auto traits = climate::ClimateTraits();
    traits.set_supports_current_temperature(this->sensor_ != nullptr);
    traits.set_supports_auto_mode(true);
    traits.set_supports_cool_mode(this->supports_cool_);
    traits.set_supports_heat_mode(this->supports_heat_);
    traits.set_supports_two_point_target_temperature(false);
    traits.set_supports_away(false);
    traits.set_visual_min_temperature(ELECTRA_TEMP_MIN);
    traits.set_visual_max_temperature(ELECTRA_TEMP_MAX);
    traits.set_visual_temperature_step(1);
    return traits;
  }
 */
climate::ClimateTraits traits() override
{
  auto traits = climate::ClimateTraits();
  traits.set_supports_current_temperature(this->sensor_ != nullptr);
  traits.set_supported_modes({ climate::CLIMATE_MODE_AUTO, climate::CLIMATE_MODE_COOL, climate::CLIMATE_MODE_HEAT, climate::CLIMATE_MODE_FAN_ONLY, climate::CLIMATE_MODE_DRY, climate::CLIMATE_MODE_OFF });
  
// added the below line for having support for the fans modes as from climate_traits.h
  traits.set_supported_fan_modes({ climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_MEDIUM, climate::CLIMATE_FAN_HIGH });
// added support for swing modes
  traits.set_supported_swing_modes({ climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_VERTICAL });

  traits.set_supports_two_point_target_temperature(false);
  //traits.set_supports_away(false);
  traits.set_visual_min_temperature(ELECTRA_TEMP_MIN);
  traits.set_visual_max_temperature(ELECTRA_TEMP_MAX);
  traits.set_visual_temperature_step(1);
  return traits;
}

  /// Transmit the state of this climate controller via IR
  void transmit_state_()
  {
    ElectraCode code = { 0 };
    code.ones1 = 1;
// original before the switch    code.fan = IRElectraFan::IRElectraFanAuto;

// Set swing bit based on the swing mode
    if (this->swing_mode) {
      code.swing = 1;  // Swing ON
    } else {
      code.swing = 0;  // Swing OFF
    }
	
/// below is for adding the fan mode
    switch (this->fan_mode.value()) {
      case climate::CLIMATE_FAN_LOW:
        code.fan = IRElectraFan::IRElectraFanLow;
        break;
      case climate::CLIMATE_FAN_MEDIUM:
        code.fan = IRElectraFan::IRElectraFanMedium;
        break;
      case climate::CLIMATE_FAN_HIGH:
        code.fan = IRElectraFan::IRElectraFanHigh;
        break;
      case climate::CLIMATE_FAN_AUTO:  //Added this for Auto Fan Mode
        code.fan = IRElectraFan::IRElectraFanAuto;
        break;
      default:
        code.fan = IRElectraFan::IRElectraFanAuto;// original IRElectraFanAuto
        break;
    }
/// above is for adding the fan mode

    switch (this->mode) {
      case climate::CLIMATE_MODE_COOL:
        code.mode = IRElectraMode::IRElectraModeCool;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_HEAT:
        code.mode = IRElectraMode::IRElectraModeHeat;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_FAN_ONLY:
        code.mode = IRElectraMode::IRElectraModeFan;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_AUTO:
        code.mode = IRElectraMode::IRElectraModeAuto;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_DRY:
        code.mode = IRElectraMode::IRElectraModeDry;
        code.power = this->active_mode_ == climate::CLIMATE_MODE_OFF ? 1 : 0;
        break;
      case climate::CLIMATE_MODE_OFF:
      default:
        code.mode = IRElectraMode::IRElectraModeOff;
        code.power = 1;
        break;
    }
    target = (uint8_t) this->target_temperature;
    auto temp = (uint8_t) roundf(clamp(target, ELECTRA_TEMP_MIN, ELECTRA_TEMP_MAX));
    code.temperature = temp - 15;

    ESP_LOGD(TAG, "Sending electra code: %lld", code.num);

    auto transmit = this->transmitter_->transmit();
    auto data = transmit.get_data();

    data->set_carrier_frequency(38000);
    uint16_t repeat = 3;

    for (uint16_t r = 0; r < repeat; r++) {
      // Header
      data->mark(3 * ELECTRA_TIME_UNIT);
      uint16_t next_value = 3 * ELECTRA_TIME_UNIT;
      bool is_next_space = true;

      // Data
      for (int j = ELECTRA_NUM_BITS - 1; j>=0; j--)
      {
        uint8_t bit = (code.num >> j) & 1;

        // if current index is SPACE
        if (is_next_space) {
          // one is one unit low, then one unit up
          // since we're pointing at SPACE, we should increase it by a unit
          // then add another MARK unit
          if (bit == 1) {
            data->space(next_value + ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = false;

          } else {
            // we need a MARK unit, then SPACE unit
            data->space(next_value);
            data->mark(ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = true;
          }

        } else {
          // current index is MARK
          
          // one is one unit low, then one unit up
          if (bit == 1) {
            data->mark(next_value);
            data->space(ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = false;

          } else {
            data->mark(next_value + ELECTRA_TIME_UNIT);
            next_value = ELECTRA_TIME_UNIT;
            is_next_space = true;
          }
        }
      }

      // Last value must be SPACE
      data->space(next_value);
    }

    // Footer
    data->mark(4 * ELECTRA_TIME_UNIT);

    transmit.perform();
  }
/*
  ///these are new rows for getting the IR reciever data - original from coolix.h
  /// Handle received IR Buffer
  static bool on_electra(climate::Climate *parent, remote_base::RemoteReceiveData data);
  bool on_receive(remote_base::RemoteReceiveData data) override { return ElectraClimate::on_electra(this, data); }

///original 
///  bool on_receive(remote_base::RemoteReceiveData data) override { return CoolixClimate::on_coolix(this, data); }
*/



  ClimateMode active_mode_;

  bool supported_cool_{true};
  bool supported_heat_{true};

  remote_transmitter::RemoteTransmitterComponent *transmitter_;
  sensor::Sensor *sensor_{nullptr};
};

yaml is the same as the original:

captive_portal:


remote_transmitter:
 pin: 26
 carrier_duty_percent: 97%
 id: ir_transmitter

light:
  - platform: status_led
    name: "Indecator LED"
    pin: 8

climate:
  - platform: custom
    lambda: |-
      auto electra_climate = new ElectraClimate();
      electra_climate->set_transmitter(id(ir_transmitter));
      App.register_component(electra_climate);
      return {electra_climate};

    climates:
      - name: "Basement Aircon"

Working great! now I don't know what to do with my broadlinks I ordered :)

https://github.com/omersht/ElectraEspHome

Did you personally utilized a temperature sensor?

No

But it’s possible

Can anyone knows how to add the support for the IR receiver, so a change with the regular remote will be reflected in HA?

Yes, in the github repository I have made https://github.com/omersht/ElectraEspHome

i added the option for decode the IR signal, in case that someone is using the old IR transmitter.

/* #include <iostream>
#include <vector>
#include <string>
#include <cmath>
using namespace std; */

/* struct ac_code {
    int fan;
    int mode;
    int temp;
}; */

// A function to check if a value is within 5% tolerance of a target value
bool within_tolerance(int value, int target) {
    return std::abs(value - target) <= (0.05 * target);
}

std::vector<int> decode_ir_signal(std::vector<int>& vec) {
    // A constant to store the number of bits in the code
    const int ELECTRA_NUM_BITS2 = 34;
    std::vector<int> decoded_bits(ELECTRA_NUM_BITS2, 0); // bit has ELECTRA_NUM_BITS elements, all equal to 0
    
    //cout << "\n"; // print a newline

    // A constant to store the time unit in microseconds
    const int ELECTRA_TIME_UNIT2 = 1000;
    // A variable to store the next value to be pushed into the vector
    int next_value = 3 * ELECTRA_TIME_UNIT2;
    // A boolean flag to indicate whether the next value is a space or not
    bool is_next_space = true;
    int code_index = 0;

    for (int j = 1; j < vec.size() - 1; j++) {
        if (j > 5 && std::abs(vec[j]) > 2800) {
            break;
        }

        int x = vec[j];

        // if current index is SPACE
        if (is_next_space) {
            if (within_tolerance(abs(vec[j]), next_value + ELECTRA_TIME_UNIT2)) {
                decoded_bits[code_index] = 1;
/*                 cout << "s1b1 ";
                cout << "\n"; // print a newline */
                is_next_space = false;
                next_value = ELECTRA_TIME_UNIT2;
            } else {
                decoded_bits[code_index] = 0;
/*                 cout << "s1b0 ";
                cout << "\n"; // print a newline */
                next_value = ELECTRA_TIME_UNIT2;
                is_next_space = true;
                j = j + 1;
            }
        } else {
            if (within_tolerance(abs(vec[j]), next_value)) {
                decoded_bits[code_index] = 1;
/*                 cout << "s0b1 ";
                cout << "\n"; // print a newline */
                j = j + 1;
                next_value = ELECTRA_TIME_UNIT2;
                is_next_space = false;
            } else {
                decoded_bits[code_index] = 0;
/*                 cout << "s0b0 ";
                cout << "\n"; // print a newline */
                next_value = ELECTRA_TIME_UNIT2;
                is_next_space = true;
            }
        }
        code_index = code_index + 1;
    }

    return decoded_bits;
}

the yaml should be like this:

esphome:
  name: ac-parents-electra
  friendly_name: Parents AC
  includes:
    - ElectraClimate.h
    - ElectraDecodeFinal.h

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "UbGyg4="

ota:
  - platform: esphome
    password: "75ff13a"

wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password
    - ssid: !secret wifi_ssid2
      password: !secret wifi_password2
    
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Ac-Parents-Electra"
    password: "ySYKNFeRJZk2"

captive_portal:

sensor:
  - platform: dht
    model: DHT22
    pin: 0
    id: dht_sensor
    temperature:
      name: "AC Parents Temperature"
      id: dht_temp
    humidity:
      name: "AC Parents Humidity"
    update_interval: 60s  

remote_transmitter:
  pin: 3  # RX pin
  carrier_duty_percent: 50%
  id: my_ir_transmitter

remote_receiver:
  pin: 
    number: 1  # TX pin
    inverted: True
    mode: INPUT_PULLUP
  id: ir_receiver
  dump: raw
  tolerance: 55%
  filter: 500us
  on_raw:
    then:
      - lambda: |-
          if ((std::abs(x[0]) > 2800) && (std::abs(x[1]) > 2800)) {// change the 2nd pulse to 2800 to includes bit power=0

            // Log the current AC status
            ElectraCode current;
            switch (id(climate_id).mode) {
              case climate::CLIMATE_MODE_COOL:
                current.mode=IRElectraMode::IRElectraModeCool;
                break;
              case climate::CLIMATE_MODE_AUTO:
                current.mode = IRElectraMode::IRElectraModeAuto;
                break;
              case climate::CLIMATE_MODE_HEAT:
                current.mode=IRElectraMode::IRElectraModeHeat;
                break;
              case climate::CLIMATE_MODE_OFF:
                current.mode = IRElectraMode::IRElectraModeOff;
                break;
              case climate::CLIMATE_MODE_DRY:
                current.mode = IRElectraMode::IRElectraModeDry;
                break;
            }

            switch (id(climate_id).fan_mode.value()) {
              case climate::CLIMATE_FAN_LOW:
                current.fan=IRElectraFan::IRElectraFanLow;
                break;
              case climate::CLIMATE_FAN_MEDIUM:
                current.fan = IRElectraFan::IRElectraFanMedium;
                break;
              case climate::CLIMATE_FAN_HIGH:
                current.fan=IRElectraFan::IRElectraFanHigh;
                break;
            }
            
            ESP_LOGD("climate", "Current AC mode: %d", current.mode);
            ESP_LOGD("climate", "Current Fan mode: %d", current.fan);
            // Log the current target_temperature
            float current_target_temperature = id(climate_id).target_temperature;
            ESP_LOGD("climate", "Current AC target Temperature: %.1f°C", current_target_temperature);

            // decodeding the IR signal
            auto decoded_bits = decode_ir_signal(x);           
            auto mode =0;
            for (int i = 1; i <= 3; i++) {
                mode = mode << 1 | (decoded_bits[i] & 1);
            }
            int target_temp=(15 + 8 * decoded_bits[11] + 4 * decoded_bits[12] + 2 * decoded_bits[13] + decoded_bits[14]);
            ESP_LOGD("IR Receiver", " target_temp- dec: %lld", target_temp);
            
            ElectraCode code;
            code.num = 0;
            for (int i = 0; i < decoded_bits.size(); i++) {
              code.num = code.num << 1 | (decoded_bits[i] & 1);
            }// code.num is reversed of the string decoded_bits
            ESP_LOGD("IR Receiver", "Received code dec: %lld", code.num);
            ESP_LOGD("IR Receiver", "AC mode from the code: %lld", code.mode);
            ESP_LOGD("IR Receiver", "AC fan from the code: %lld", code.fan);
            ESP_LOGD("IR Receiver", "AC target Temperature from the code: %lld", code.temperature+15);

            // update the target temperature and fan no matter what is the code.power state is
              if(code.temperature>0){// In case that the recieved code is not nonsense
                id(climate_id).target_temperature = code.temperature + 15;//Temperature, where 15 is 0000, 30 is 1111
              }
              switch (code.fan) {
                  case 0:
                    id(climate_id).fan_mode = esphome::climate::CLIMATE_FAN_LOW;
                    break;
                  case 1:
                    id(climate_id).fan_mode = esphome::climate::CLIMATE_FAN_MEDIUM;
                    break;
                  case 2:
                    id(climate_id).fan_mode = esphome::climate::CLIMATE_FAN_HIGH;
                    break;
                  case 3:
                    id(climate_id).fan_mode = esphome::climate::CLIMATE_FAN_ON;
                    break;
                  default:
                    id(climate_id).fan_mode.reset();  // Optional: if the value is out of range, reset the optional
                    break;
                }

            if (code.power){
              if (id(climate_id).mode!=climate::CLIMATE_MODE_OFF) {
                id(climate_id).mode=climate::CLIMATE_MODE_OFF;
              }
              else {           
                if (code.mode == IRElectraMode::IRElectraModeCool) {
                    id(climate_id).mode = climate::CLIMATE_MODE_COOL;
                  } else if (code.mode == IRElectraMode::IRElectraModeHeat) {
                    id(climate_id).mode = climate::CLIMATE_MODE_HEAT;
                  } else if (code.mode == IRElectraMode::IRElectraModeAuto) {
                    id(climate_id).mode = climate::CLIMATE_MODE_AUTO;
                  } else if (code.mode == IRElectraMode::IRElectraModeDry) {
                    id(climate_id).mode = climate::CLIMATE_MODE_DRY;
                  } else if (code.mode == IRElectraMode::IRElectraModeFan) {
                    id(climate_id).mode = climate::CLIMATE_MODE_FAN_ONLY;
                  } else if (code.mode == IRElectraMode::IRElectraModeOff) {
                    id(climate_id).mode = climate::CLIMATE_MODE_OFF;
                  } else if (code.mode == 0) {
                    id(climate_id).mode = climate::CLIMATE_MODE_OFF;
                  } 
                }
                ESP_LOGD("IR Receiver", "In the if, so something was changed - mode,fan or temp (code.mode=1 and mode !=off)");

              // if((id(climate_id).mode ==code.mode )&&(id(climate_id).target_temperature==code.temperature + 15)&&(id(climate_id).fan_mode==code.fan)){
              //   ESP_LOGD("IR Receiver", "Nothing was changed - mode,fan or temp");
              //   id(climate_id).mode = climate::CLIMATE_MODE_OFF;
              // }
              }
            else {//code.power=0
              ESP_LOGD("IR Receiver", "In the else statment (code.power=0). no update to the mode");
              }
            id(climate_id).publish_state();
            ESP_LOGD("IR Receiver", "Publish the state");    
            delay (5000) ;//delay in order not to includes multiple IR signal of the same state
          }
climate:
  - platform: custom
    lambda: |-
      auto electra_climate = new ElectraClimate();
      electra_climate->set_sensor(id(dht_temp)); // Optional
      electra_climate->set_transmitter(id(my_ir_transmitter));
      App.register_component(electra_climate);
      return {electra_climate};

    climates:
      - name: "Parents AC"
        id: climate_id