- Sonoff zigbee3.0 - P (https://www.amazon.es/dp/B09KXTCMSC)
- Coordinator firmware here from https://www.zigbee2mqtt.io/guide/adapters/#recommended
Lluís D. lluisd
lluisd
/ ArtilleryGeniusSDSupport.MD
Last active
February 8, 2023 16:15
Artillery Genius internal SD
- SD adapter (https://es.aliexpress.com/item/32854192637.html) (UPDATE: this seems similar https://es.aliexpress.com/item/4000733279901.html)
- 4x M3x8 screws
- 4x M3 square nuts (https://es.aliexpress.com/item/32860675224.html)
- Holder (https://www.thingiverse.com/thing:4797102)
*To check if it's already enabled, try to send the M21 to your printer to see if it recognizes it.
lluisd
/ tinywhoop_gates.md
Last active
March 18, 2021 20:11
- 6x 2mm string LED, green, blue and pink are bright colors, where green is the brightest one. (12e) I can confirm that are to bright in my case, I still need to fix it.
- I used 10m of 10x12 Polyamide(PA or PA12) tube but PE or PEXa material also work, can be found in some specialized store.
- Some long straight 20cm outer diameter tube used for the structure, easy to be found in any local store. I use about 7-8m (20cm each leg and 50cm or 30cm for the body)