Skip to content

Instantly share code, notes, and snippets.

@macromorgan

macromorgan/dmesg

Created January 4, 2023 23:54
Show Gist options
  • Save macromorgan/eb42d32dfc93a3973b3ace265607ff37 to your computer and use it in GitHub Desktop.
Save macromorgan/eb42d32dfc93a3973b3ace265607ff37 to your computer and use it in GitHub Desktop.
Download ZIP
rg35xx bootlogs
Raw
dmesg
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.37 (flower@flower-B85M-D2V) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #18 SMP PREEMPT Sat Dec 3 00:38:31 CST 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: gs705a, model: Actions GS705A board
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] owl_reserve: pyhsical memory size 268435456 bytes, end @0x10000000
[ 0.000000] find owl_fb_size=0x900000
[ 0.000000] find owl_kinfo_size=0x100000
[ 0.000000] find owl_ion0_size=0x0
[ 0.000000] find owl_ion1_size=0x2000000
[ 0.000000] ion_reserve: ion_pmem reserved base d600000 size 33554432
[ 0.000000] Reserved memory 32MB
[ 0.000000] FB: 0x0f700000, 9MB
[ 0.000000] KINFO: 0x0f600000, 1MB
[ 0.000000] ION0: 0x0f600000, 0MB
[ 0.000000] ION1: 0x0d600000, 32MB
[ 0.000000] cma: CMA: reserved 24 MiB at 0bc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] owl_smp_init_cpus(): ncores 4
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e62000 s13888 r8192 d14784 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS3 earlyprintk clk_ignore_unused selinux=0 loglevel=7 console=ttyS1,115200 console=tty0 androidboot.dvfslevel=0x705x androidboot.bootdev=sd boot_dev=sd2
[ 0.000000] boot_mode_process =sd2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 178152k/178152k available, 83992k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a1513c (10293 kB)
[ 0.000000] .init : 0xc0a16000 - 0xc0a7f640 ( 422 kB)
[ 0.000000] .data : 0xc0a80000 - 0xc0b0a70c ( 554 kB)
[ 0.000000] .bss : 0xc0b0a70c - 0xc0c52bc4 (1314 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:247
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.37 (flower@flower-B85M-D2V) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #18 SMP PREEMPT Sat Dec 3 00:38:31 CST 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: gs705a, model: Actions GS705A board
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] owl_reserve: pyhsical memory size 268435456 bytes, end @0x10000000
[ 0.000000] find owl_fb_size=0x900000
[ 0.000000] find owl_kinfo_size=0x100000
[ 0.000000] find owl_ion0_size=0x0
[ 0.000000] find owl_ion1_size=0x2000000
[ 0.000000] ion_reserve: ion_pmem reserved base d600000 size 33554432
[ 0.000000] Reserved memory 32MB
[ 0.000000] FB: 0x0f700000, 9MB
[ 0.000000] KINFO: 0x0f600000, 1MB
[ 0.000000] ION0: 0x0f600000, 0MB
[ 0.000000] ION1: 0x0d600000, 32MB
[ 0.000000] cma: CMA: reserved 24 MiB at 0bc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] owl_smp_init_cpus(): ncores 4
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e62000 s13888 r8192 d14784 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS3 earlyprintk clk_ignore_unused selinux=0 loglevel=7 console=ttyS1,115200 console=tty0 androidboot.dvfslevel=0x705x androidboot.bootdev=sd boot_dev=sd2
[ 0.000000] boot_mode_process =sd2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 178152k/178152k available, 83992k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a1513c (10293 kB)
[ 0.000000] .init : 0xc0a16000 - 0xc0a7f640 ( 422 kB)
[ 0.000000] .data : 0xc0a80000 - 0xc0b0a70c ( 554 kB)
[ 0.000000] .bss : 0xc0b0a70c - 0xc0c52bc4 (1314 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:247
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.010173] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 0.050232] pid_max: default: 32768 minimum: 301
[ 0.050487] Security Framework initialized
[ 0.050552] SELinux: Disabled at boot.
[ 0.050585] AppArmor: AppArmor disabled by boot time parameter
[ 0.050713] Mount-cache hash table entries: 512
[ 0.058850] Initializing cgroup subsys debug
[ 0.058903] Initializing cgroup subsys memory
[ 0.058980] Initializing cgroup subsys freezer
[ 0.059101] CPU: Testing write buffer coherency: ok
[ 0.059777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.059855] owl_smp_prepare_cpus(max_cpus:4)
[ 0.059969] Setting up static identity map for 0xc071ef30 - 0xc071f02c
[ 0.060056] owl_l2x0_init()
[ 0.060171] L310 cache controller enabled
[ 0.060195] l2x0: 16 ways, CACHE_ID 0x410080c9, AUX_CTRL 0x3e050000, Cache size: 524288 B
[ 0.100128] ftrace: Allocated trace_printk buffers
[ 0.108202] cpu:1
[ 0.108228] po 1
[ 0.108442] wu 1
[ 0.109341] pr:-1
[ 0.139867] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.160657] cpu:2
[ 0.160693] po 2
[ 0.160971] wu 2
[ 0.161850] pr:-1
[ 0.199865] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.220659] cpu:3
[ 0.220706] po 3
[ 0.220987] wu 3
[ 0.221867] pr:-1
[ 0.259864] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.260024] Brought up 4 CPUs
[ 0.260068] SMP: Total of 4 processors activated (4787.40 BogoMIPS).
[ 0.260090] CPU: All CPU(s) started in SVC mode.
[ 0.261357] devtmpfs: initialized
[ 0.267526] pinctrl core: initialized pinctrl subsystem
[ 0.268018] regulator-dummy: no parameters
[ 0.269307] NET: Registered protocol family 16
[ 0.276227] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.276275] init sirqs
[ 0.276389] owl_gpio_init()
[ 0.279330] owl_gpio_probe()
[ 0.279361] owl gpio bank0 - irq68
[ 0.279381] owl gpio bank1 - irq69
[ 0.279398] owl gpio bank2 - irq70
[ 0.279415] owl gpio bank3 - irq71
[ 0.279431] owl gpio bank4 - irq72
[ 0.280346] owl_sirq_probe()
[ 0.280372] owl sirq bank0 - irq45
[ 0.280392] owl sirq bank1 - irq46
[ 0.280409] owl sirq bank2 - irq47
[ 0.280438] sirq map 45 -> 213
[ 0.280462] sirq map 46 -> 214
[ 0.280485] sirq map 47 -> 215
[ 0.283038] owl_board_init()
[ 0.283073] hw-breakpoint: Debug register access (0xee110e91) caused undefined instruction on CPU 1
[ 0.283121] hw-breakpoint: Debug register access (0xee112e95) caused undefined instruction on CPU 3
[ 0.283129] hw-breakpoint: Debug register access (0xee112e95) caused undefined instruction on CPU 2
[ 0.283136] hw-breakpoint: Debug register access (0xee112e95) caused undefined instruction on CPU 0
[ 0.283140] hw-breakpoint: CPU 2 debug is powered down!
[ 0.283253] hw-breakpoint: Debug register access (0xee112e95) caused undefined instruction on CPU 1
[ 0.283579] free reserve pages 256 to buddy system
[ 0.283603] owl_common_init()
[ 0.283715] [PowerGate] name: 'dma', on: 0, before SPS_PG_CTL: 0x703360
[ 0.283744] [PowerGate] name: 'dma', on: 0, after SPS_PG_CTL: 0x703260
[ 0.284431] pwm-owl b01b0050.pwm: Probing...
[ 0.284699] dmm debugfs support
[ 0.285688] owl-i2c b0170000.i2c: owl_i2c_module_init failed
[ 0.285746] owl-i2c: probe of b0170000.i2c failed with error 12
[ 0.298604] bio: create slab <bio-0> at 0
[ 0.299752] owl_pwm_bl_probe: name = backlight.2
[ 0.300231] owl_dma_init
[ 0.300368] owl_dma_probe
[ 0.300419] [PowerGate] name: 'dma', on: 1, before SPS_PG_CTL: 0x702260
[ 0.300516] [PowerGate] name: 'dma', on: 1, after SPS_PG_CTL: 0x703360
[ 0.300633] owl_dma b0260000.dma: actions AHB DMA Controller ( cpy slave memset ), 12 channels
[ 0.302697] atc260x_i2c 1-0065: Probing...
[ 0.302792] atc260x_i2c 1-0065: atc260x_core_dev_init() enter
[ 0.303294] atc260x_i2c 1-0065: set bdg ctl, ret=0 value=0xd4
[ 0.305178] atc260x_i2c 1-0065: detect PMU chip type 1 ver B
[ 0.305209] atc260x_i2c 1-0065: PMU root IRQ 215
[ 0.305935] atc260x_i2c 1-0065: icm_ohm not config, use default value
[ 0.305972] atc260x_i2c 1-0065: auxadc icm_ohm = 20
[ 0.306746] atc260x-regulator atc2603c-dcdc1.1: Probing atc2603c-dcdc1, id=1
[ 0.307911] dcdc1: 700 <--> 1400 mV at 1100 mV
[ 0.308707] atc260x-regulator atc2603c-dcdc2.2: Probing atc2603c-dcdc2, id=2
[ 0.310064] dcdc2: 1000 <--> 1850 mV at 1450 mV
[ 0.310853] atc260x-regulator atc2603c-dcdc3.3: Probing atc2603c-dcdc3, id=3
[ 0.312001] dcdc3: 2600 <--> 3300 mV at 3200 mV
[ 0.312822] atc260x-regulator atc2603c-ldo1.1: Probing atc2603c-ldo1, id=1
[ 0.315155] ldo1: 2800 mV
[ 0.315948] atc260x-regulator atc2603c-ldo2.2: Probing atc2603c-ldo2, id=2
[ 0.318280] ldo2: 2600 <--> 3300 mV at 3100 mV
[ 0.319067] atc260x-regulator atc2603c-ldo3.3: Probing atc2603c-ldo3, id=3
[ 0.321424] ldo3: 1500 <--> 2000 mV at 1800 mV
[ 0.322236] atc260x-regulator atc2603c-ldo5.5: Probing atc2603c-ldo5, id=5
[ 0.322571] ldo5: 3100 <--> 3300 mV at 2800 mV
[ 0.323363] atc260x-regulator atc2603c-ldo6.6: Probing atc2603c-ldo6, id=6
[ 0.325708] ldo6: 700 <--> 1400 mV at 1100 mV
[ 0.326522] atc260x-regulator atc2603c-ldo7.7: Probing atc2603c-ldo7, id=7
[ 0.327168] ldo7: 1800 mV
[ 0.327969] atc260x-regulator atc2603c-ldo8.8: Probing atc2603c-ldo8, id=8
[ 0.328324] ldo8: 2300 <--> 3300 mV at 3100 mV
[ 0.329126] atc260x-regulator atc2603c-ldo11.11: Probing atc2603c-ldo11, id=11
[ 0.331514] ldo11: 2600 <--> 3300 mV at 3100 mV
[ 0.332080] atc260x-switch-ldo atc2603c-switch1.1: Probing atc2603c-switch1, id=1
[ 0.332133] atc260x-switch-ldo atc2603c-switch1.1: pmic_ver=1
[ 0.332316] [SWITCH1] set switch 1 to ldo mode Version D!
[ 0.332795] enable switch 1, version D!
[ 0.334974] switch1: 3100 <--> 3300 mV at 3100 mV
[ 0.336216] atc260x-gpio atc2603c-gpio.0: Probing...
[ 0.336531] atc2603c-sgpio atc2603c-sgpio.0: Probing...
[ 0.336980] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq0 -> virq219
[ 0.337025] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq1 -> virq220
[ 0.337065] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq2 -> virq221
[ 0.337102] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq3 -> virq222
[ 0.337137] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq4 -> virq223
[ 0.337174] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq5 -> virq224
[ 0.337210] atc2603c-sgpio atc2603c-sgpio.0: new IRQ mapping: hwirq6 -> virq225
[ 0.337239] atc2603c-sgpio atc2603c-sgpio.0: root virq num : 218
[ 0.338932] atc260x_i2c 1-0065: atc260x_core_dev_init() exit
[ 0.339355] atc260x-pm atc2603c-pm.0: Probing...
[ 0.339558] atc260x-pm atc2603c-pm.0: _set_s2_mode() can not get of_property s2_mode
[ 0.339600] atc260x-pm atc2603c-pm.0: _atc260x_pm_set_wakeup_src_inner() enter, mask=0x7fff src=0x706
[ 0.339949] atc260x-pm atc2603c-pm.0: _atc260x_pm_set_wakeup_src_inner() setup reg=0x0 msk=0xffe0 val=0xe0c0 readback=0xe0cb
[ 0.340294] atc260x-pm atc2603c-pm.0: _atc260x_pm_set_wakeup_src_inner() setup reg=0x3 msk=0xc val=0x0 readback=0x4280
[ 0.340632] atc260x-pm atc2603c-pm.0: _atc260x_pm_set_wakeup_src_inner() enter, mask=0x8 src=0x0
[ 0.340968] atc260x-pm atc2603c-pm.0: _atc260x_pm_set_wakeup_src_inner() setup reg=0x0 msk=0x100 val=0x0 readback=0xe0cb
[ 0.341742] atc260x-pm atc2603c-pm.0: _clear_status() no need to restore old alarm
[ 0.342810] atc260x-pm atc2603c-pm.0: got support_adaptor_type: 1
[ 0.343430] atc260x-pm atc2603c-pm.0: translated wakeup falgs: 0x0
[ 0.343552] [PM] set pmic suspend ops 0xc0acc388
[ 0.343734] atc260x-pm atc2603c-pm.0: #####atc260x_pm_probe PMU_SYS_CTL0:0xe0cb ####
[ 0.344178] SCSI subsystem initialized
[ 0.344785] spi: cs=0
[ 0.344938] asoc_spi0 b0208000.spi: master is unqueued, this is deprecated
[ 0.345447] spi: cs=0
[ 0.345594] asoc_spi0 b020c000.spi: master is unqueued, this is deprecated
[ 0.346104] usbcore: registered new interface driver usbfs
[ 0.346205] usbcore: registered new interface driver hub
[ 0.346365] usbcore: registered new device driver usb
[ 0.347165] cma_activate: id=8, type=2, base=257949696, size=0
[ 0.347360] owl_ion_probe: add heap ion_fb
[ 0.347390] cma_activate: id=0, type=4, base=224395264, size=33554432
[ 0.348541] owl_ion_probe: add heap ion_pmem
[ 0.348577] cma_activate: id=12, type=0, base=0, size=0
[ 0.348758] owl_ion_probe: add heap ion_system
[ 0.349020] Advanced Linux Sound Architecture Driver Initialized.
[ 0.349757] Bluetooth: Core ver 2.16
[ 0.349832] NET: Registered protocol family 31
[ 0.349908] Bluetooth: HCI device and connection manager initialized
[ 0.349958] Bluetooth: HCI socket layer initialized
[ 0.349990] Bluetooth: L2CAP socket layer initialized
[ 0.350043] Bluetooth: SCO socket layer initialized
[ 0.350493] cfg80211: Calling CRDA to update world regulatory domain
[ 0.352078] Switching to clocksource timer0
[ 0.395968] NET: Registered protocol family 2
[ 0.396812] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.396900] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.396971] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.397058] TCP: reno registered
[ 0.397088] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.397139] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.397501] NET: Registered protocol family 1
[ 0.397992] RPC: Registered named UNIX socket transport module.
[ 0.398028] RPC: Registered udp transport module.
[ 0.398050] RPC: Registered tcp transport module.
[ 0.398070] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.398353] Trying to unpack rootfs image as initramfs...
[ 0.406289] Freeing initrd memory: 652K (c2000000 - c20a3000)
[ 0.407039] hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available
[ 0.407716] owl_uart: no device is found
[ 0.407936] b0120000.serial: ttyS0 at MMIO 0xb0120000 (irq = 61) is a OWL_SERIAL
[ 0.408585] b0126000.serial: ttyS3 at MMIO 0xb0126000 (irq = 64) is a OWL_SERIAL
[ 0.408632] owl_serial: console setup on port #3
[ 1.614913] console [ttyS3] enabled
[ 1.618844] failed to get pinctrl
[ 1.622185] failed to set serial pin mux
[ 1.626128] b012a000.serial: ttyS5 at MMIO 0xb012a000 (irq = 66) is a OWL_SERIAL
[ 1.634037] ## boot_dev: 0x22
[ 1.638075] audit: initializing netlink socket (disabled)
[ 1.643552] type=2000 audit(1.630:1): initialized
[ 1.661909] NTFS driver 2.1.30 [Flags: R/W].
[ 1.666674] fuse init (API version 7.22)
[ 1.671266] exFAT: Core Version 1.1.3
[ 1.674958] exFAT: FS Version 1.1.3
[ 1.678679] msgmni has been set to 463
[ 1.684806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.692243] io scheduler noop registered
[ 1.696165] io scheduler deadline registered
[ 1.700677] io scheduler cfq registered (default)
[ 1.706308] owl_dss DE: owl_de_probe, pdev = 0xcb2ef600
[ 1.711556] owl_dss DE: DE INITED FROM UBOOT ?? 1
[ 1.716400] owl_dss DE: de irq init ok
[ 1.724333] owl_dss MMU: mmu_init: base 0xcbd00000 base_phys 0xc0a3e8040bd00000 free_info->addr 0xcbd00000
[ 1.735091] owl_dss LCDC: owl_lcdchw_probe
[ 1.739197] owl_dss LCDC: LCD INITED FROM UBOOT?? 1
[ 1.744203] owl_dss LCDC: error!lcdchw_parse_params, fail to get lcd standby gpio
[ 1.751769] owl_dss LCDC: owl_lcdchw_probe called ok ~~~~~~~~~~~~~
[ 1.758309] 0 portname = rgb
[ 1.761272] current type lcd
[ 1.765383] timings : xres 1280 yres 720 size of 40 4
[ 1.770605] Actions CEC for OWL Driver, (c) 2009 ACTIONS Electronics
[ 1.777315] atm7059a-hdmi-cec b02c0000.hdmi_cec: probe successful
[ 1.793503] brd: module loaded
[ 1.801727] loop: module loaded
[ 1.804912] misc_info_init, line 1065, Nov 30 2022 21:15:19
[ 1.810664] mi_debug_init, line 372
[ 1.814588] atc260x-pwm atc2603c-pwm.0: atc260x_pwm Probing...
[ 1.820421] atc260x_pwm_drv: [atc260x_pwm_on start]
[ 1.825955] atc260x_pwm_drv: [atc260x_pwm_on finished]
[ 1.831616] tun: Universal TUN/TAP device driver, 1.6
[ 1.836703] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.843152] PPP generic driver version 2.4.2
[ 1.847642] PPP BSD Compression module registered
[ 1.852366] PPP Deflate Compression module registered
[ 1.857429] PPP MPPE Compression module registered
[ 1.862234] NET: Registered protocol family 24
[ 1.866832] usbcore: registered new interface driver rtl8150
[ 1.872569] usbcore: registered new interface driver r8152
[ 1.878112] usbcore: registered new interface driver ax88179_178a
[ 1.884273] usbcore: registered new interface driver cdc_ether
[ 1.890149] usbcore: registered new interface driver cdc_subset
[ 1.896180] usbcore: registered new interface driver cdc_ncm
[ 1.901910] usbcore: registered new interface driver asix
[ 1.907380] usbcore: registered new interface driver sr9700_android
[ 1.913729] usbcore: registered new interface driver CoreChips
[ 1.920141] port_host_plug_detect[0]:3
[ 1.923916] port0_vubs_en:-1
[ 1.926861] port_host_plug_detect[1]:3
[ 1.930604] can't find vbus_otg1_en_gpio config
[ 1.935145] port1_vubs_en:-1
[ 1.938083] can't find aotg_udc_enable config
[ 1.942512] can't find aotg_udc_enable config
[ 1.946862] No aotg_udc being enabled!
[ 1.951102]
[ 1.951102] ------------dwc3_clk_init-----ic=1-----
[ 1.957680] [PowerGate] name: 'usb2_0', on: 1, before SPS_PG_CTL: 0x703360
[ 1.964672] [PowerGate] name: 'usb2_0', on: 1, after SPS_PG_CTL: 0x70bb60
[ 1.971474] start mon 0 ......
[ 1.971486] [PowerGate] name: 'usb3', on: 1, before SPS_PG_CTL: 0x70bb60
[ 1.971559] [PowerGate] name: 'usb3', on: 1, after SPS_PG_CTL: 0x70ff60
[ 1.988037] [PowerGate] name: 'usb2_1', on: 1, before SPS_PG_CTL: 0x70ff60
[ 1.989115] current_uref: 3, USB3PHY2 Swing value: 0x4
[ 1.989119] GS705A phy init for dwc3 gadget 21:15:29
[ 1.989382] current_uref: 3, USB3PHY2 Swing value: 0x4
[ 1.989386] GS705A phy init for dwc3 gadget 21:15:29
[ 2.015396] [PowerGate] name: 'usb2_1', on: 1, after SPS_PG_CTL: 0x74ff64
[ 2.022232] start mon 1 ......
[ 2.039810] usbcore: registered new interface driver cdc_acm
[ 2.045510] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.053598] usbcore: registered new interface driver uas
[ 2.058995] usbcore: registered new interface driver usb-storage
[ 2.065167] usbcore: registered new interface driver usbserial
[ 2.071043] usbcore: registered new interface driver option
[ 2.076678] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.084288] atc260x-onoff atc2603c-onoff.0: Probing atc2603c-onoff
[ 2.090481] atc260x-onoff atc2603c-onoff.0: atc260x_onoff IRQ num : 216
[ 2.097133] gpio:hard_onoff_key not config
[ 2.101479] input: atc260x_onoff as /devices/b0174000.i2c/i2c-1/1-0065/atc2603c-onoff.0/input/input0
[ 2.112047] usbcore: registered new interface driver xpad
[ 2.118013] atc260x-rtc atc2603c-rtc.0: Probing...
[ 2.126363] atc260x-rtc atc2603c-rtc.0: rtc core: registered atc260x-RTC as rtc0
[ 2.134118] atc260x-rtc atc2603c-rtc.0: RTC alarm IRQ num : 217
[ 2.140814] atc260x-hwmon atc2603c-hwmon.0: Probing atc2603c-hwmon
[ 2.147434] tmu-mem:start=0xb01b00e8
[ 2.151827] device-mapper: uevent: version 1.0.3
[ 2.156946] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 2.165819] Bluetooth: HCI UART driver ver 2.2
[ 2.170267] Bluetooth: HCI H4 protocol initialized
[ 2.175099] Bluetooth: Realtek h5 driver version 1.0.1
[ 2.180233] Realtek h5 driver version 1.0.1
[ 2.184250] Bluetooth: HCI Realtek H5 protocol initialized
[ 2.189901] HCI Realtek H5 protocol initialized
[ 2.194284] cpuidle: using governor ladder
[ 2.198551] cpuidle: using governor menu
[ 2.203049] ## host_id: 0 boot_dev 22 host->index: 1
[ 2.208705] gl520x_mmc b0230000.mmc: using dma0chan4 for DMA transfers
[ 2.215273] cfg SDC0 not support sdio3.0
[ 2.219308] use GPIO to detect SD/MMC card
[ 2.223465] host0: sure rescan mmc
[ 2.227190] ## host_id: 2 boot_dev 22 host->index: 0
[ 2.232631] gl520x_mmc b0238000.mmc: using dma0chan5 for DMA transfers
[ 2.239194] use COMMAND to detect SD/MMC card
[ 2.243573] host2: sure rescan mmc
[ 2.247498] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.256227] usbcore: registered new interface driver usbhid
[ 2.261802] usbhid: USB HID core driver
[ 2.266456] zram: Created 1 device(s) ...
[ 2.271163] ashmem: initialized
[ 2.274633] logger: created 256K log 'log_main'
[ 2.279398] logger: created 256K log 'log_events'
[ 2.284360] logger: created 256K log 'log_radio'
[ 2.289200] logger: created 256K log 'log_system'
[ 2.295356] atm7059-pcm-audio atm7059-pcm-audio: atm7059_pcm_probe!!
[ 2.301942] atc2603a_init
[ 2.304732] [SNDRV]:[atc2603a_get_cfg] Fail to get device_node
[ 2.304732]
[ 2.312130] [SNDRV]:[atc2603a_init] audio get cfg failed!
[ 2.312130]
[ 2.319107] atc2603c_init
[ 2.321761] fail get adc level
[ 2.330419] owl pinctrl: 1pinmux_request_check_gpio
[ 2.335412] owl pinctrl: 1CHECK PMX:P_I2S_BCLK0 has already been requested by owl-gpio:28
[ 2.349653] get pcm pin num 0
[ 2.352848] owl-audio-i2s b0100000.gl5203-audio-i2s: atm7059_dai_probe
[ 2.359750] atm7059-hdmi-audio atm7059-hdmi-audio: atm7059_hdmi_probe!!
[ 2.366472] host2,platfrom request already
[ 2.367873] bluetooth_pcm_probe!
[ 2.368009] bluetooth_pcm_init ok!! line=245
[ 2.368012] atm7059_link_init
[ 2.368080] init_work_handler,486
[ 2.368301] maybe using irq
[ 2.368302] soc-audio soc-audio: ASoC: machine atm7059_link should use snd_soc_register_card()
[ 2.368731] u32 classifier
[ 2.368734] Actions configured
[ 2.368743] Netfilter messages via NETLINK v0.30.
[ 2.368838] nf_conntrack version 0.5.0 (3705 buckets, 14820 max)
[ 2.369511] ctnetlink v0.93: registering with nfnetlink.
[ 2.369604] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.369608] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.370192] xt_time: kernel timezone is -0000
[ 2.370683] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.370893] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 2.370969] arp_tables: (C) 2002 David S. Miller
[ 2.371044] TCP: cubic registered
[ 2.371048] Initializing XFRM netlink socket
[ 2.371796] NET: Registered protocol family 10
[ 2.372782] mip6: Mobile IPv6
[ 2.372831] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.373068] sit: IPv6 over IPv4 tunneling driver
[ 2.374485] NET: Registered protocol family 17
[ 2.374529] NET: Registered protocol family 15
[ 2.374538] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.374553] Bluetooth: HIDP socket layer initialized
[ 2.374618] l2tp_core: L2TP core driver, V2.0
[ 2.374640] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.374645] lib80211: common routines for IEEE802.11 drivers
[ 2.510516] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.518327] ThumbEE CPU extension supported.
[ 2.522736] owl_jtag_init
[ 2.525481] [PM] owl_pm_init() 1052
[ 2.528966] train_Msize:256, train_ces:1
[ 2.552292] start:0xc0008000, end:0xc0a1513c, checksum:0xe69bdd40
[ 2.559892] fbdev info: xres 640, yres 480, rotate 0, refresh 56, mode 1 def_display lcd
[ 2.568026] fb_infos allocated
[ 2.612894] owldss_hdmi_read_edid ~~~ error hdmi not connected
[ 2.620047] np c0e5d7c4
[ 2.622619] boot_hdmi_rotate 0
[ 2.625756] of_property_read_u32 is error
[ 2.629758] of_property_read bootrotate is error
[ 2.634381] boot_cvbs_enable 0
[ 2.637515] boot_hdmi_rotate 0 boot_cvbs_rotate=0
[ 2.642959] regulator-dummy: disabling
[ 2.647674] file system registered
[ 2.652834] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.659717] android_usb gadget: Number of LUNs=2
[ 2.664355] lun0: LUN: removable file: (no medium)
[ 2.669230] lun1: LUN: removable file: (no medium)
[ 2.674782] android_usb gadget: android_usb ready
[ 2.680354] atc260x-rtc atc2603c-rtc.0: setting system clock to 2022-01-01 00:03:24 UTC (1640995404)
[ 2.691540] ATC260X_POWER: create sysfs for atc260x power
[ 2.697060] ATC260X_POWER: temp_ctl_enable: 0
[ 2.701501] ATC260X_POWER: temp_ctl_enable is not enable
[ 2.706927] no_screen: 1
[ 2.717422] charger=cace3118 3435
[ 2.720744] set_vbus_path=c0465088 set_apds_vbus_pd=c0465130
[ 2.726853] cpufreq: bond_opt=15
[ 2.730466] clk: Not disabling unused clocks
[ 2.735291] ====otgvbus_gpio: num-78, active-low---detect_type=3,idpin_type=0,vbus_type=2---
[ 2.750859] ALSA device list:
[ 2.753853] No soundcards found.
[ 2.757755] Freeing unused kernel memory: 420K (c0a16000 - c0a7f000)
[ 2.769645] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 2.778654] init: starting 'ueventd'
[ 2.862234] acts_mmc_get_ro: Card read-only status 0
[ 2.868174] sd card init ok
[ 2.870969] mmc_add_card: bootdev 0x22
[ 2.874721] force sd2(emmc) host emmc_boot_card
[ 2.879245] mmc0: new high speed SDXC card at address 0001
[ 2.884953] ## md->name_idx: 0
[ 2.888211] mmcblk0: emmc_boot_card USD 59.5 GiB
[ 2.899085] mmcblk0: p1 p2 p3 p4
[ 3.092799] atc2603c_check_bat_online bat_v:4189
[ 3.097416]
[ 3.097416] [power] Battery detected
[ 3.142200] ++++++++cpufreq ready++++++++
[ 3.146216] ++++++++pdata->freq_tab[0].freq_clip_max:504000++++++++
[ 3.152480] ++++++++pdata->freq_tab[1].freq_clip_max:504000++++++++
[ 3.162922] ATC260X_POWER: update_charge_state:power status change, cur=0x1, pre=0x0
[ 3.163261] temp:38
[ 3.163281] OWL: Kernel Thermal management registered
[ 3.178861] ATC260X_POWER: atc260x_charger_adjust_current:set constant current:1000mA(binary:8)
[ 3.187843] [atc260x_wall_get_prop] first_power_on = false!
[ 3.188013] --allen--<set_my_work_led> 11111 my_led_status=0
[ 3.224922] owl pinctrl: 1gpio_request_check_pinmux
[ 3.229893] owl pinctrl: 1CHECK PMX:P_UART2_RTSB has already been requested by b0120000.serial
[ 3.238440] owl pinctrl: 1gpio_request_check_pinmux
[ 3.243614] owl pinctrl: 1CHECK PMX:P_UART2_CTSB has already been requested by b0120000.serial
[ 3.252390] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input1
[ 3.271483] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[ 3.421001] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended
[ 3.434453] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,discard
[ 3.445173] init: processing action 0x3b728 (wait_for_coldboot_done)
[ 3.451596] init: wait for /dev/.coldboot_done
[ 3.456207] init: processing action 0x3b770 (mix_hwrng_into_linux_rng)
[ 3.462907] init: /dev/hw_random not found
[ 3.467063] init: processing action 0x3b7b8 (keychord_init)
[ 3.472782] init: processing action 0x3b800 (console_init)
[ 3.479072] init: cannot open '/initlogo.rle'
[ 3.484610] init: processing action 0x3b848 (mix_hwrng_into_linux_rng)
[ 3.491264] init: /dev/hw_random not found
[ 3.495481] init: processing action 0x3b890 (property_service_init)
[ 3.507571] init: skipping insecure file '/system/build.prop'
[ 3.514225] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
[ 3.523598] init: processing action 0x3b8d8 (property_shutdown_check)
[ 3.531512] init: persist.sys.shutok set to null
[ 3.536360] init: open /data/property/persist.sys.shutok success
[ 3.536576] atc2603c-audio atc260x-audio: ASoC: no dapm match for AOUT FL FR Mixer --> AOUT MIXER --> ADC0 Mux
[ 3.536602] atc2603c-audio atc260x-audio: ASoC: Failed to add route AOUT FL FR Mixer -> AOUT MIXER -> ADC0 Mux
[ 3.537624] codec_bluetooth_pcm_probe!!
[ 3.566709] init: processing action 0x3b920 (signal_init)
[ 3.572412] init: signal_init, recoverywhencrash not defined.
[ 3.578404] init: signal_init, poweroffwhencrash not defined.
[ 3.584640] init: processing action 0x3b968 (check_startup)
[ 3.590583] init: processing action 0x3ae08 (early-boot)
[ 3.597173] soc-audio soc-audio: atc2603c-dai <-> owl-audio-i2s mapping ok
[ 3.598332] init: starting 'hwclock_update'
[ 3.599945] init: starting 'loadapp'
[ 3.601041] init: processing action 0x3ae80 (boot)
[ 3.601997]
[ 3.601997] ----udc_set_plugstate--PLUGSTATE_OUT--
[ 3.602159] android_work: did not send uevent (0 0 (null))
[ 3.602500] [PowerGate] name: 'usb3', on: 0, before SPS_PG_CTL: 0x74ff64
[ 3.602516] [PowerGate] name: 'usb3', on: 0, after SPS_PG_CTL: 0x74fb64
[ 3.602526]
[ 3.602526] ------------dwc3_clk_exit----------
[ 3.602838]
[ 3.602838] debug idpin set =1 !!
[ 3.628341] ATC260X_GAUGE: ========This is a new reconstructed gauge by actions==========
[ 3.628360] ATC260X_GAUGE: [atc260x_gauge_init] drv name:atc260x_cap_gauge, drv version:Actions-v1-20150720151405
[ 3.629273] ATC260X_GAUGE: [gauge_create_sysfs] create sysfs for gauge
[ 3.629384] ATC260X_GAUGE: cfg_items.support_battery_temperature not config
[ 3.629433] ATC260X_GAUGE: [get_pmu_ic_type]pmu type is 1
[ 3.629442] ATC260X_GAUGE: [init_gauge] PMU current ratio:3
[ 3.629733] ATC260X_GAUGE: [init_gauge] first_product:0
[ 3.629748] ATC260X_GAUGE: [resistor_init] inited ch_resistor : 150, inited disch_resistor:250
[ 3.692480]
[ 3.692480] debug idpin set =0 !!
[ 3.692799]
[ 3.692799] ----udc_set_plugstate--PLUGSTATE_IN-2--
[ 3.692810]
[ 3.692810] ------------dwc3_clk_init-----ic=1-----
[ 3.694757] [PowerGate] name: 'usb3', on: 1, before SPS_PG_CTL: 0x74bb64
[ 3.694832] [PowerGate] name: 'usb3', on: 1, after SPS_PG_CTL: 0x74ff64
[ 3.747930] soc-audio soc-audio: atm7059-hdmi-dai <-> owl-audio-i2s mapping ok
[ 3.765352] soc-audio soc-audio: bluetooth-pcm-dai <-> owl-audio-i2s mapping ok
[ 3.864579] current_uref: 3, USB3PHY2 Swing value: 0x4
[ 3.869788] GS705A phy init for dwc3 gadget 21:15:29
[ 3.875728] current_uref: 3, USB3PHY2 Swing value: 0x4
[ 3.880934] GS705A phy init for dwc3 gadget 21:15:29
[ 3.887086] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.893751] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.902427] current_uref: 3, USB3PHY2 Swing value: 0x4
[ 3.907651] GS705A phy init for xhci 21:15:29
[ 3.915599] xhci-hcd xhci-hcd.0.auto: irq 55, io mem 0xb0400000
[ 3.921817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.928796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.936153] usb usb1: Product: xHCI Host Controller
[ 3.941088] usb usb1: Manufacturer: Linux 3.10.37 xhci-hcd
[ 3.946726] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.954535] hub 1-0:1.0: USB hub found
[ 3.958379] hub 1-0:1.0: 1 port detected
[ 3.963851] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.970440] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.978296]
[ 3.978296] #xhci_start#
[ 3.982468] --allen--atc260x_enable_vbusotg: on=0
[ 3.999897] ss_try_next_mode:lfps_src_mode=1
[ 4.139445] FAT-fs (mmcblk0p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.172033] --allen--atc260x_enable_vbusotg: on=1
[ 4.181444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.188406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.195807] usb usb2: Product: xHCI Host Controller
[ 4.200737] usb usb2: Manufacturer: Linux 3.10.37 xhci-hcd
[ 4.206351] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 4.214363] hub 2-0:1.0: USB hub found
[ 4.218232] hub 2-0:1.0: 1 port detected
[ 4.223380]
[ 4.223380] write usb_con_msg USB_A_IN
[ 4.229333] init: waitpid returned pid 99, status = 00000000
[ 4.235168] init: process 'hwclock_update', pid 99 exited
[ 4.240805] init: processing action 0x3b9b0 (queue_property_triggers)
[ 4.247477] init: processing action 0x3b120 (property:sys.powerctl=*)
[ 4.254142] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 4.262561] init: powerctl: cannot expand '${sys.powerctl}'
[ 4.268255] init: processing action 0x3b170 (property:ro.debuggable=1)
[ 4.275455] init: starting 'console'
[ 4.353227] set_par(0)
[ 4.359189] set_par(1)
[ 4.362050] timings : xres 1280 yres 720 size of 40 4
[ 4.673614]
[ 4.673614] s900_dai_hw_free temp_output_mode = 1
[ 4.679893]
[ 4.679893] s900_dai_hw_free temp_input_mode = 1
[ 4.686226]
[ 4.686226] s900_dai_mode_unset temp_output_mode = 1
[ 4.696667] atm7059_dai_hw_params,SNDRV_PCM_FORMAT_S32_LE
[ 4.702356]
[ 4.702356] s900_dai_mode_set temp_output_mode = 1
[ 4.708734]
[ 4.708734] s900_pcm_hw_params temp_output_mode = 1
[ 4.715214]
[ 4.715214] s900_pcm_hw_params temp_input_mode = 1
[ 5.166420] temp:38
[ 7.166390] temp:39
Raw
uboot
row_col 72
ddr_cap 256
bootdev= 0x22
scan 1
g_current_bus = 1--pmu- ok
0x11:0xe84f:0xe84f
PMU_CTL3 = 0x4280
s2 flag = 0
from s4
pmu_status = 0x0
DRAM init mode0,type16,2cs,x16bus,rcc0x0,wrodt1,rdodt1,drvc,468MHz.@180525_R...
Fail:0x8023,0x8023,0x0,0x0;
DRAM init mode0,type16,1cs,x16bus,rcc0x0,wrodt1,rdodt1,drvc,468MHz.@180525_R...
Ok:DCU_CFG:0x202c,256MByte Cap.
==ddr_test 256 MB ==
== ok==
pll: core 600MHz, dev 600MHz
emmc clk=12mhz
load app :OK
load uboot: load address is 0x5000000, entry point is 0x5000040
in fourth
dvfs = 0xc582bb73
dvfs maigc = 0x44564653, dvfs = 0xc582bb73
U-Boot 2015.04 (Dec 03 2022 - 00:38:39)Actions-Semi
DRAM: mem-size=256MB
256 MiB
PLL:core=0x332,dev=0x1164,bus=0x1c710000,bus1=0x2e004,display=0x164, spead=0x0
set kinfo addr = 0fb00000
gpio=18,mode=1,val=0
gpio=21,mode=1,val=0
gpio=22,mode=1,val=1
gpio=23,mode=1,val=0
gpio=95,mode=1,val=0
pmu_config.bus_id = 1
ret = 7104
pwm1 val=0x102c3f
pwm2 val=0x10343f
PMU_CTL1=0x17
0x11:0xe84e:0xe84e
pmu init finish!
begin to check power!
--get_charge_plugin_status: wall_mv=4841
----------bat_voltage = 4201
bat_mv:4201
node_path[2]=/i2c@b0174000/atc2603c@65/atc260x-power
support type: both DCIN and USB
-11-- wakeup_flag = 0x17
low_power_boot_choice is 0
MMC: error: SDC0 send CMD8, No rsp
error: SDC0 send CMD55, No rsp
error: SDC0 send CMD1, No rsp
Card did not respond to voltage select!
slot:0, error mmc_init
error:-1,owl_sd_init fail
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x0debe608
SD0: 0, eMMC: 1 (SD)
NAND: Using default environment
bootmode = 0
emmc boot
error: SDC0 send CMD8, No rsp
error: SDC0 send CMD55, No rsp
error: SDC0 send CMD1, No rsp
Card did not respond to voltage select!
Failed to find mmc:0
bootlogo: if=mmc, dev=1
reading boot_logo.bmp.gz
reading new_gamma_data
Fail to load gamma
OWL VIDEO: video hw init
OWL VIDEO: power on
OWL VIDEO: wait res 999, 113301
OWL LCD: lcd init
fdtdec_get_lcd_par
fdtdec_pwm_get: fdtdec_pwm_get(0debffa8, 8064, pwms, 0)
pwm_node=ed0, pwm_chip.pwm_node=ed0
pwm id = 0
pwm period = 50000
pwm polarity = 0
OWL VIDEO: display 0x1 register def_mode 0dec76b0
OWL VIDEO: display 0x1 register ok
buf->vaddr 0x0dec5370 buf->paddr 0xdec5370
OWL dsi: fdt No dsi par
fdtdec_get_hdmi_par
def_display_name lcd
bpp 4
get fb dss, img_w = 640
get fb dss, img_h = 480
owl_dss_init ok ,xres 0
yres 0
display->name lcd is a default display ,used channel 0 and layer 0
fdtdec enable lcd
get_pwr_ctl lcd_power_gpios 0
get_pwr_ctl lcd_reset_gpios 0
reset ok lcd_reset_gpios
----nv3052c_spi_init 473,start set regs
pwm:request duty = 19531
pwm:request period_ns = 50000
open bl 1
fdtdec enable lcd ok 1
In: serial
Out: serial
Err: serial
Net: owl_mac_parse_fdtdec,phy_addr -1
owl_mac_parse_fdtdec,power-gpio -1
owl_mac_parse_fdtdec,reset-gpio -1
owl_mac
Warning: owl_mac using MAC address from net device
Update MAC: 70:61:72:74:20:24
, usb_ether
Error: usb_ether address not set.
boot from emmc card ...
reading uEnv.txt
124 bytes read in 3 ms (40 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading boot.scr
** Unable to read file boot.scr **
reading uImage
5594968 bytes read in 480 ms (11.1 MiB/s)
reading ramdisk.img
669248 bytes read in 60 ms (10.6 MiB/s)
reading kernel.dtb
32009 bytes read in 7 ms (4.4 MiB/s)
## Booting kernel from Legacy Image at 00007fc0 ...
Image Name: Linux-3.10.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5594904 Bytes = 5.3 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01ffffc0 ...
Image Name: RAMFS
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 669184 Bytes = 653.5 KiB
Load Address: 02000000
Entry Point: 02000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 03800000
Booting using the fdt blob at 0x3800000
XIP Kernel Image ... OK
Using Device Tree in place at 03800000, end 0380ad08
owl_boot_fdt_setup <NULL>
read_mi_head, line 433, magic 0x0, length 0, item num 0
read Head null
read SN failed
cmdline: console=ttyS3 earlyprintk clk_ignore_unused selinux=0 loglevel=7 console=ttyS1,115200 console=tty0 androidboot.dvfslevel=0x705x androidboot.bootdev=sd boot_dev=sd2
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment