MikroTik RouterOS v7 dual DHCP WAN recursive failover w/ PCC load-balancing; and recursive ECMP

router.cfg

# feb/11/2022 11:00:55 by RouterOS 7.2rc3
# software id = 9QK9-C798
#
# model = RB5009UG+S+
# serial number = XXXXXXXXXX

/ip settings set allow-fast-path=no

/interface bridge add admin-mac=FF:FF:FF:FF:FF:FF auto-mac=no name=bridge

/interface bridge port add bridge=bridge ingress-filtering=no interface=ether3
/interface bridge port add bridge=bridge ingress-filtering=no interface=ether4
/interface bridge port add bridge=bridge ingress-filtering=no interface=ether5

/interface list add name=WAN
/interface list add name=LAN

/interface list member add interface=bridge list=LAN
/interface list member add interface=ether1 list=WAN
/interface list member add interface=ether2 list=WAN
#/interface bridge port add bridge=bridge ingress-filtering=no interface=ether6
#/interface bridge port add bridge=bridge ingress-filtering=no interface=ether7
#/interface bridge port add bridge=bridge ingress-filtering=no interface=ether8
#/interface bridge port add bridge=bridge ingress-filtering=no interface=sfp-sfpplus1

/ip address add address=192.168.88.1/24 interface=bridge network=192.168.88.0
/ip dns static add address=192.168.88.1 name=router.lan
/ip pool add name=pool1 ranges=192.168.88.10-192.168.88.254
/ip dhcp-server add address-pool=pool1 interface=bridge name=dhcp1
/ip dhcp-server network add address=192.168.88.0/24 dns-server=192.168.88.1 gateway=192.168.88.1

/ip dhcp-client add interface=ether1 add-default-route=no script=":if (\$bound=1) do={\r\
    \n    /ip/route/set [find where comment=\"ISP1\"] gateway=\$\"gateway-address\"\r\
    \n}\r\
    \n\r\
    \n/ip/firewall/connection/remove [find connection-mark=\"ISP1_conn\"]\r\
    \n/ip/firewall/connection/remove [find connection-mark=\"ISP2_conn\"]\r\
    \n" use-peer-dns=no use-peer-ntp=no
/ip dhcp-client add interface=ether2 add-default-route=no script=":if (\$bound=1) do={\r\
    \n    /ip/route/set [find where comment=\"ISP2\"] gateway=\$\"gateway-address\"\r\
    \n}\r\
    \n\r\
    \n/ip/firewall/connection/remove [find connection-mark=\"ISP1_conn\"]\r\
    \n/ip/firewall/connection/remove [find connection-mark=\"ISP2_conn\"]" use-peer-dns=no use-peer-ntp=no


/routing table add fib name=to_ISP1
/routing table add fib name=to_ISP2

/ip route
# recursive routes for ECMP default gateways, dst-address are public DNS servers
add distance=1 dst-address=9.9.9.9/32 gateway=ether1 scope=10 target-scope=10 comment=ISP1
add distance=1 dst-address=8.26.56.26/32 gateway=ether2 scope=10 target-scope=10 comment=ISP2

# ECMP default gateways
add check-gateway=ping distance=1 dst-address=0.0.0.0/0 gateway=9.9.9.9 scope=10 target-scope=11
add check-gateway=ping distance=1 dst-address=0.0.0.0/0 gateway=8.26.56.26 scope=10 target-scope=11

# recursive routes for default gateways, dst-address are public DNS servers
add dst-address=64.6.64.6/32 gateway=ether1 scope=10 comment="ISP1"
add dst-address=208.67.220.220/32 gateway=ether1 scope=10 comment="ISP1"
add dst-address=208.67.222.222/32 gateway=ether2 scope=10 comment="ISP2"
add dst-address=64.6.65.6/32 gateway=ether2 scope=10 comment="ISP2"

# load-balanced w/ auto failover default gateways
add check-gateway=ping distance=1 dst-address=0.0.0.0/0 gateway=64.6.64.6 routing-table=to_ISP1 scope=10 target-scope=11
add check-gateway=ping distance=2 dst-address=0.0.0.0/0 gateway=64.6.65.6 routing-table=to_ISP1 scope=10 target-scope=11
add check-gateway=ping distance=1 dst-address=0.0.0.0/0 gateway=208.67.222.222 routing-table=to_ISP2 scope=10 target-scope=11
add check-gateway=ping distance=2 dst-address=0.0.0.0/0 gateway=208.67.220.220 routing-table=to_ISP2 scope=10 target-scope=11


/ip firewall address-list add address=192.168.88.0/24 list=local
/ip firewall mangle
add action=accept chain=prerouting comment="bridge access" dst-address-list=local in-interface-list=LAN

# WAN to LAN
add action=mark-connection chain=prerouting connection-mark=no-mark connection-state=established,related in-interface=ether1 new-connection-mark=ISP1_conn \
    passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark connection-state=established,related in-interface=ether2 new-connection-mark=ISP2_conn \
    passthrough=yes
    
# PCC mangles    
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-list=!local dst-address-type=!local in-interface-list=LAN new-connection-mark=ISP1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-list=!local dst-address-type=!local in-interface-list=LAN new-connection-mark=ISP2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/1
    
    
add action=mark-routing chain=prerouting connection-mark=ISP1_conn in-interface-list=LAN new-routing-mark=to_ISP1 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=ISP2_conn in-interface-list=LAN new-routing-mark=to_ISP2 passthrough=yes

add action=mark-routing chain=output connection-mark=ISP1_conn dst-address-list=!local new-routing-mark=to_ISP1 passthrough=yes
add action=mark-routing chain=output connection-mark=ISP2_conn dst-address-list=!local new-routing-mark=to_ISP2 passthrough=yes

# masquerade
/ip firewall nat add action=masquerade chain=srcnat ipsec-policy=out,none out-interface-list=WAN

how to deal with bgp routes? Their routing mark beeing overriden