2017-03-03 fm4dd
The gcc compiler can optimize code by taking advantage of CPU specific features. Especially for ARM CPU's, this can have impact on application performance. ARM CPU's, even under the same architecture, could be implemented with different versions of floating point units (FPU). Utilizing full FPU potential improves performance of heavier operating systems such as full Linux distributions.
These flags can both be used to set the CPU type. Setting one or the other is sufficient.
| #!/boot/bzImage | |
| # Linux kernel userspace initialization code, translated to bash | |
| # (Minus floppy disk handling, because seriously, it's 2017.) | |
| # Not 100% accurate, but gives you a good idea of how kernel init works | |
| # GPLv2, Copyright 2017 Hector Martin <[email protected]> | |
| # Based on Linux 4.10-rc2. | |
| # Note: pretend chroot is a builtin and affects the current process | |
| # Note: kernel actually uses major/minor device numbers instead of device name |
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
| #!/bin/bash | |
| # Baidu Yun Command Line Interface | |
| # Depends: bash, curl, grep, awk, sed, od | |
| # (They are basicly builtin tools of any *nix system.) | |
| # Additionally, fastupload depends: head, wc, md5sum or md5, cksum | |
| # (Which are also builtin tools) | |
| #### Variables #### |
I've been wanting to do a serious project in Go. One thing holding me back has been a my working environment. As a huge PyCharm user, I was hoping the Go IDE plugin for IntelliJ IDEA would fit my needs. However, it never felt quite right. After a previous experiment a few years ago using Vim, I knew how powerful it could be if I put in the time to make it so. Luckily there are plugins for almost anything you need to do with Go or what you would expect form and IDE. While this is no where near comprehensive, it will get you writing code, building and testing with the power you would expect from Vim.
I'm assuming you're coming with a clean slate. For me this was OSX so I used MacVim. There is nothing in my config files that assumes this is the case.
| # Download and Install the Latest Updates for the OS | |
| apt-get update && apt-get upgrade -y | |
| # Set the Server Timezone to CST | |
| echo "America/Chicago" > /etc/timezone | |
| dpkg-reconfigure -f noninteractive tzdata | |
| # Enable Ubuntu Firewall and allow SSH & MySQL Ports | |
| ufw enable | |
| ufw allow 22 |
