Mihai Ambrosie mihsu81

Retrieving the OTA URL for Tuya Zigbee devices

This example is for Ubuntu 20.4.3 x86_64. But should also work on other supported OS.

Used:

MITM proxy - Charles proxy (but it is probably possible to use another)
android emulator - Genymotion

Step 1: Installing the `Charles` proxy

Soft hack to open telnet

You need gateway 3(mgl03) connected to MiHome. And also ip and gateway token.

1 way (recommended)

Via XiaomiGateway3 component.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}

Disclaimer

Following instructions are provided without any warranty, and may even get you in trouble legally. The instructions are provided for testing, learning, preventing e-waste, and should be use with care. We (including contributers + commentators) are not responsible for any damage to your device(s) or any legal issues.

Getting Started

Instructions have been moved to https://github.com/francoism90/asus-router. :)

	# MIT License

	# Copyright (c) 2021 freol35241

	# Permission is hereby granted, free of charge, to any person obtaining a copy
	# of this software and associated documentation files (the "Software"), to deal
	# in the Software without restriction, including without limitation the rights
	# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
	# copies of the Software, and to permit persons to whom the Software is
	# furnished to do so, subject to the following conditions:

	# MQTT broker configuration
	mqtt:
	broker: !secret mqtt_broker
	username: !secret mqtt_username
	password: !secret mqtt_password
	discovery: False # Only if you use the HA API usually
	id: mqtt_client

	# Define the room for this ESP32 node
	substitutions:

	[Unit]
	Description=fancontrol-gpio

	[Service]
	Type=simple
	ExecStart=/usr/bin/fancontrol-gpio

	[Install]
	WantedBy=multi-user.target

	substitutions:
	devicename: opentherm
	upper_devicename: Opentherm

	esphome:
	name: $devicename
	platform: ESP8266
	board: d1_mini_lite
	arduino_version: '2.7.2'
	platformio_options:

	#
	# udev rule
	# Mount USB drive to the media directory using the partition name as mount point
	#
	# Description:
	# Created for Home Assistant OS, this rule mounts any USB drives
	# into the Hassio media directory (/mnt/data/supervisor/media).
	# When a USB drive is connected to the board, the rule creates one directory
	# per partition under the media directory. The newly created partition is named
	# as the partition name. If the partition does not have a name, then the following

	esphome:
	name: led_strip_1
	platform: ESP8266
	board: esp8285
	includes:
	- custom_components/sonoff_l1.h

	wifi:

	Template
	{"NAME":"Tuya Siren","GPIO":[255,107,255,108,255,255,0,0,255,255,255,255,255],"FLAG":0,"BASE":54}

	You must activate the template before using any of the tuya commands below.


	Recommended rules for tasmota:
	rule1 on system#boot backlog tuyasend4 102,0; tuyasend2 103,300; TuyaSend1 117,0 endon
	rule1 1
	tuyamcu 11,104