Created
December 20, 2017 15:15
-
-
Save misodengaku/8cb7452ae0d3d7ea38dcd053a205e8ce to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aall [~/Linux] | |
| Adapter #0 | |
| ============================================================================== | |
| Versions | |
| ================ | |
| Product Name : RAID Ctrl SAS 6G 1GB (D3116) | |
| Serial No : 0000000039353429 | |
| FW Package Build: 23.9.0-0031 | |
| Mfg. Data | |
| ================ | |
| Mfg. Date : 00/00/00 | |
| Rework Date : 00/00/00 | |
| Revision No : | |
| Battery FRU : N/A | |
| Image Versions in Flash: | |
| ================ | |
| BIOS Version : 5.41.00_4.12.05.00_0x06000300 | |
| WebBIOS Version : 6.1-49-e_49-01-Rel | |
| Preboot CLI Version: 05.05-03:#%00011 | |
| FW Version : 3.220.125-2420 | |
| NVDATA Version : 2.1209.03-0118 | |
| Boot Block Version : 2.05.00.00-0010 | |
| BOOT Version : 07.26.13.219 | |
| Pending Images in Flash | |
| ================ | |
| None | |
| PCI Info | |
| ================ | |
| Controller Id : 0000 | |
| Vendor Id : 1000 | |
| Device Id : 005b | |
| SubVendorId : 1734 | |
| SubDeviceId : 11d3 | |
| Host Interface : PCIE | |
| ChipRevision : C1 | |
| Link Speed : 0 | |
| Number of Frontend Port: 0 | |
| Device Interface : PCIE | |
| Number of Backend Port: 8 | |
| Port : Address | |
| 0 0000000000000000 | |
| 1 0000000000000000 | |
| 2 0000000000000000 | |
| 3 0000000000000000 | |
| 4 0000000000000000 | |
| 5 0000000000000000 | |
| 6 0000000000000000 | |
| 7 0000000000000000 | |
| HW Configuration | |
| ================ | |
| SAS Address : 5003005701022850 | |
| BBU : Absent | |
| Alarm : Present | |
| NVRAM : Present | |
| Serial Debugger : Present | |
| Memory : Present | |
| Flash : Present | |
| Memory Size : 1024MB | |
| TPM : Absent | |
| On board Expander: Absent | |
| Upgrade Key : Absent | |
| Temperature sensor for ROC : Present | |
| Temperature sensor for controller : Absent | |
| ROC temperature : 98 degree Celsius | |
| Settings | |
| ================ | |
| Current Time : 15:17:52 12/20, 2017 | |
| Predictive Fail Poll Interval : 300sec | |
| Interrupt Throttle Active Count : 16 | |
| Interrupt Throttle Completion : 50us | |
| Rebuild Rate : 30% | |
| PR Rate : 20% | |
| BGI Rate : 30% | |
| Check Consistency Rate : 30% | |
| Reconstruction Rate : 30% | |
| Cache Flush Interval : 4s | |
| Max Drives to Spinup at One Time : 2 | |
| Delay Among Spinup Groups : 6s | |
| Physical Drive Coercion Mode : Disabled | |
| Cluster Mode : Disabled | |
| Alarm : Disabled | |
| Auto Rebuild : Enabled | |
| Battery Warning : Disabled | |
| Ecc Bucket Size : 15 | |
| Ecc Bucket Leak Rate : 1440 Minutes | |
| Restore HotSpare on Insertion : Enabled | |
| Expose Enclosure Devices : Disabled | |
| Maintain PD Fail History : Enabled | |
| Host Request Reordering : Enabled | |
| Auto Detect BackPlane Enabled : SGPIO/i2c SEP | |
| Load Balance Mode : Auto | |
| Use FDE Only : No | |
| Security Key Assigned : No | |
| Security Key Failed : No | |
| Security Key Not Backedup : No | |
| Default LD PowerSave Policy : Automatic | |
| Maximum number of direct attached drives to spin up in 1 min : 20 | |
| Auto Enhanced Import : No | |
| Any Offline VD Cache Preserved : No | |
| Allow Boot with Preserved Cache : No | |
| Disable Online Controller Reset : No | |
| PFK in NVRAM : No | |
| Use disk activity for locate : No | |
| POST delay : 16 seconds | |
| BIOS Error Handling : Pause on Errors | |
| Current Boot Mode :Normal | |
| Capabilities | |
| ================ | |
| RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span | |
| Supported Drives : SAS, SATA | |
| Allowed Mixing: | |
| Mix in Enclosure Allowed | |
| Status | |
| ================ | |
| ECC Bucket Count : 0 | |
| Limitations | |
| ================ | |
| Max Arms Per VD : 32 | |
| Max Spans Per VD : 8 | |
| Max Arrays : 128 | |
| Max Number of VDs : 64 | |
| Max Parallel Commands : 1008 | |
| Max SGE Count : 60 | |
| Max Data Transfer Size : 8192 sectors | |
| Max Strips PerIO : 42 | |
| Max LD per array : 16 | |
| Min Strip Size : 8 KB | |
| Max Strip Size : 1.0 MB | |
| Max Configurable CacheCade Size: 0 GB | |
| Current Size of CacheCade : 0 GB | |
| Current Size of FW Cache : 0 MB | |
| Device Present | |
| ================ | |
| Virtual Drives : 0 | |
| Degraded : 0 | |
| Offline : 0 | |
| Physical Devices : 1 | |
| Disks : 0 | |
| Critical Disks : 0 | |
| Failed Disks : 0 | |
| Supported Adapter Operations | |
| ================ | |
| Rebuild Rate : Yes | |
| CC Rate : Yes | |
| BGI Rate : Yes | |
| Reconstruct Rate : Yes | |
| Patrol Read Rate : Yes | |
| Alarm Control : Yes | |
| Cluster Support : No | |
| BBU : Yes | |
| Spanning : Yes | |
| Dedicated Hot Spare : Yes | |
| Revertible Hot Spares : Yes | |
| Foreign Config Import : Yes | |
| Self Diagnostic : Yes | |
| Allow Mixed Redundancy on Array : No | |
| Global Hot Spares : Yes | |
| Deny SCSI Passthrough : No | |
| Deny SMP Passthrough : No | |
| Deny STP Passthrough : No | |
| Support Security : No | |
| Snapshot Enabled : No | |
| Support the OCE without adding drives : Yes | |
| Support PFK : Yes | |
| Support PI : Yes | |
| Support Boot Time PFK Change : No | |
| Disable Online PFK Change : No | |
| Support LDPI Type1 : No | |
| Support LDPI Type2 : No | |
| Support LDPI Type3 : No | |
| PFK TrailTime Remaining : 0 days 0 hours | |
| Support Shield State : Yes | |
| Block SSD Write Disk Cache Change: No | |
| Supported VD Operations | |
| ================ | |
| Read Policy : Yes | |
| Write Policy : Yes | |
| IO Policy : Yes | |
| Access Policy : Yes | |
| Disk Cache Policy : Yes | |
| Reconstruction : Yes | |
| Deny Locate : No | |
| Deny CC : No | |
| Allow Ctrl Encryption: No | |
| Enable LDBBM : Yes | |
| Support Breakmirror : No | |
| Power Savings : No | |
| Supported PD Operations | |
| ================ | |
| Force Online : Yes | |
| Force Offline : Yes | |
| Force Rebuild : Yes | |
| Deny Force Failed : No | |
| Deny Force Good/Bad : No | |
| Deny Missing Replace : No | |
| Deny Clear : No | |
| Deny Locate : No | |
| Support Temperature : Yes | |
| NCQ : No | |
| Disable Copyback : No | |
| Enable JBOD : No | |
| Enable Copyback on SMART : Yes | |
| Enable Copyback to SSD on SMART Error : Yes | |
| Enable SSD Patrol Read : No | |
| PR Correct Unconfigured Areas : Yes | |
| Enable Spin Down of UnConfigured Drives : Yes | |
| Disable Spin Down of hot spares : No | |
| Spin Down time : 30 | |
| T10 Power State : No | |
| Error Counters | |
| ================ | |
| Memory Correctable Errors : 0 | |
| Memory Uncorrectable Errors : 0 | |
| Cluster Information | |
| ================ | |
| Cluster Permitted : No | |
| Cluster Active : No | |
| Default Settings | |
| ================ | |
| Phy Polarity : 0 | |
| Phy PolaritySplit : 0 | |
| Background Rate : 30 | |
| Strip Size : 64kB | |
| Flush Time : 4 seconds | |
| Write Policy : WT | |
| Read Policy : None | |
| Cache When BBU Bad : Disabled | |
| Cached IO : No | |
| SMART Mode : Mode 6 | |
| Alarm Disable : No | |
| Coercion Mode : None | |
| ZCR Config : Unknown | |
| Dirty LED Shows Drive Activity : No | |
| BIOS Continue on Error : 1 | |
| Spin Down Mode : None | |
| Allowed Device Type : SAS/SATA Mix | |
| Allow Mix in Enclosure : Yes | |
| Allow HDD SAS/SATA Mix in VD : No | |
| Allow SSD SAS/SATA Mix in VD : No | |
| Allow HDD/SSD Mix in VD : No | |
| Allow SATA in Cluster : No | |
| Max Chained Enclosures : 16 | |
| Disable Ctrl-R : Yes | |
| Enable Web BIOS : Yes | |
| Direct PD Mapping : No | |
| BIOS Enumerate VDs : Yes | |
| Restore Hot Spare on Insertion : Yes | |
| Expose Enclosure Devices : No | |
| Maintain PD Fail History : Yes | |
| Disable Puncturing : No | |
| Zero Based Enclosure Enumeration : No | |
| PreBoot CLI Enabled : Yes | |
| LED Show Drive Activity : Yes | |
| Cluster Disable : Yes | |
| SAS Disable : No | |
| Auto Detect BackPlane Enable : SGPIO/i2c SEP | |
| Use FDE Only : No | |
| Enable Led Header : No | |
| Delay during POST : 0 | |
| EnableCrashDump : No | |
| Disable Online Controller Reset : No | |
| EnableLDBBM : Yes | |
| Un-Certified Hard Disk Drives : Allow | |
| Treat Single span R1E as R10 : No | |
| Max LD per array : 16 | |
| Power Saving option : All power saving options are enabled | |
| Default spin down time in minutes: 30 | |
| Enable JBOD : No | |
| TTY Log In Flash : Yes | |
| Auto Enhanced Import : No | |
| BreakMirror RAID Support : No | |
| Disable Join Mirror : No | |
| Enable Shield State : Yes | |
| Time taken to detect CME : 60s | |
| Exit Code: 0x00 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment