Robot Manager description

gistfile1.txt

Controls or outputs information about the selected robot.

IN0: Godmode ON/OFF.
IN1: Speed modifier (0.0-1.0). Only enabled if the cable is plugged in. A value of 0.0 means the robot is unable to walk.
IN2: Disable action (useful for disabling box mode until certain powerup is enabled).
IN3: Jump strength multiplier.
IN4: HP increase (heal), value * 10
IN5: HP decrease (damage), value * 10
IN6: Max HP increase, value * 10
IN7: Max HP decrease, value * 10
IN8: Weapon damage multiplier 0.0 = No extra damage, 1.0 = 5 times the damage.
IN9: Toggle robot action.
IN10: Walk left.
IN11: Walk right.
IN12: Stop all movement.
IN13: Jump.
IN14: Aim.
IN15: Attack.
IN16: Attach to nearest backpack/RC
IN17: Detach from any backpack/RC
IN18: Respawn
IN19: Freeze
IN20: Toggle roaming (non-adventure robots only).
IN21: Cycle weapons
IN22: Cycle factions

OUT0: Weapon arm angle
OUT1: Tool arm angle
OUT2: On weapon fire
OUT3: On tool use (experimental)
OUT4: Current layer. 0.0 = layer 1, 0.5 = layer 2, 1.0 = layer 3
OUT5: Head removed
OUT6: Moving left - User attempting to move left (adventure robot only)
OUT7: Moving right - User attempting to move right (adventure robot only)
OUT8: Look dir (left = 0.0, right = 1.0)
OUT9: dir - Last movement dir (left = 0.0, right = 1.0)
OUT10: Action active
OUT11: 1.0 if attached to anything, otherwise 0
OUT12: Movement left feedback (adventure robot only)
OUT13: Movement right feedback (adventure robot only)
OUT14: jump feedback (adventure robot only)
OUT15: aim feedback (adventure robot only)
OUT16: layerup feedback (adventure robot only)
OUT17: layerdown feedback (adventure robot only)
OUT18: action feedback (adventure robot only)