Setup SSL with NGINX reverse proxy

setup-ssl.md

Get a Free SSL Certificate With Let’s Encrypt

Let’s Encrypt is a free, automated, and open Certificate Authority.

1. Install tools for using the Let's Encrypt certificates using Certbot

  sudo apt-get update \
  sudo apt-get install software-properties-common
  sudo add-apt-repository ppa:certbot/certbot
  sudo apt-get update
  sudo apt-get install python-certbot-nginx

2. Configure your domain DNS to point to your droplet's IP

3. Check if your domain is pointing correctly

   $ dig +short example.com
   > 138.68.174.154
   

4. Run Certbot to create the SSL certificate

   sudo certbot --nginx certonly
   

Setup Nginx with SSL

1. Install Nginx

   sudo apt-get install nginx
   

2. Redirect all traffic traffic to SSL

   # Open the following file
   sudo vim /etc/nginx/sites-enabled/default
   
   # Delete everything and add the following
   server {
       listen 80;
       listen [::]:80 default_server ipv6only=on;
       return 301 https://$host$request_uri;
   }
   

3. Create a secure Diffie-Hellman group (takes a few minutes)

   sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 2048
   

4. Create a configuration file for SSL

   # Open the following file
   sudo vim /etc/nginx/snippets/ssl-params.conf
   
   # Paste the following from https://cipherli.st/ (follow the link for more info)
   ssl_protocols TLSv1.3 TLSv1.2 TLSv1.1 TLSv1;
   ssl_prefer_server_ciphers on;
   ssl_ciphers ECDHE-RSA-AES256-GCM-SHA512:DHE-RSA-AES256-GCM-SHA512:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384;
   ssl_ecdh_curve secp384r1; # Requires nginx >= 1.1.0
   ssl_session_timeout  10m;
   ssl_session_cache shared:SSL:10m;
   ssl_session_tickets off; # Requires nginx >= 1.5.9
   ssl_stapling on; # Requires nginx >= 1.3.7
   ssl_stapling_verify on; # Requires nginx => 1.3.7
   resolver 208.67.222.222 208.67.220.220 valid=300s;
   resolver_timeout 5s;
   add_header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload";
   add_header X-Frame-Options DENY;
   add_header X-Content-Type-Options nosniff;
   add_header X-XSS-Protection "1; mode=block";
   
   
   # Paste this at the bottom of the file
   ssl_dhparam /etc/ssl/certs/dhparam.pem;
   

5. Configure the server to use SSL

   ATTENTION: Replace all the example.com with your domain

   # Open the following file
   sudo vim /etc/nginx/sites-enabled/default
   
   # Paste the following bellow the existing config
   server {
       listen 443 ssl http2;
       listen [::]:443 ssl http2;
       server_name example.com; # REPLACE HERE
   
       ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; # REPLACE HERE
       ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; # REPLACE HERE
   
       include snippets/ssl-params.conf;
   
       location / {
           proxy_set_header X-Real-IP $remote_addr;
           proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
           proxy_set_header X-NginX-Proxy true;
           proxy_set_header Upgrade $http_upgrade;
           proxy_set_header Connection 'upgrade';
           proxy_pass http://localhost:5000/;
           proxy_ssl_session_reuse off;
           proxy_set_header Host $http_host;
           proxy_pass_header Server;
           proxy_cache_bypass $http_upgrade;
           proxy_redirect off;
       }
   }
   

6. Test the Nginx config

   $ sudo nginx -t
   > nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
   > nginx: configuration file /etc/nginx/nginx.conf test is successful
   

7. Start Nginx

   sudo systemctl start nginx
   

8. Finally, test your app by visiting your domain on your browser!

I found this really useful - thanks!

In addition to the aforementioned guide, there exists a graphical user interface (GUI) known as Nginx Proxy Manager, which may appeal to individuals who prefer not to work with code directly. The suggested approach to utilizing the Nginx Proxy Manager involves installing it on Docker and utilizing it to forward traffic to Docker containers within the same network. Following installation, generating SSL certificates is a simple process that can be achieved with a single click.

References:

1. Nginx Proxy Manager Video
2. Configure Nginx proxy_pass https

For newer OS: sudo apt-get install python3-certbot-nginx

A very useful Nginx SSL configuration file. Previously, the configuration I did myself often couldn't be accessed through Safari, but now I can smoothly access my service. Thank you very much.

😭 same as before

I resolved this issue by updating nginx from version 1.20.1 installed via yum on CentOS to the self-compiled version 1.24.0.

Thank you! Very helpful..

#Thanks