Setup SSL with NGINX reverse proxy

setup-ssl.md

Get a Free SSL Certificate With Let’s Encrypt

Let’s Encrypt is a free, automated, and open Certificate Authority.

1. Install tools for using the Let's Encrypt certificates using Certbot

  sudo apt-get update \
  sudo apt-get install software-properties-common
  sudo add-apt-repository ppa:certbot/certbot
  sudo apt-get update
  sudo apt-get install python-certbot-nginx

2. Configure your domain DNS to point to your droplet's IP

3. Check if your domain is pointing correctly

   $ dig +short example.com
   > 138.68.174.154
   

4. Run Certbot to create the SSL certificate

   sudo certbot --nginx certonly
   

Setup Nginx with SSL

1. Install Nginx

   sudo apt-get install nginx
   

2. Redirect all traffic traffic to SSL

   # Open the following file
   sudo vim /etc/nginx/sites-enabled/default
   
   # Delete everything and add the following
   server {
       listen 80;
       listen [::]:80 default_server ipv6only=on;
       return 301 https://$host$request_uri;
   }
   

3. Create a secure Diffie-Hellman group (takes a few minutes)

   sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 2048
   

4. Create a configuration file for SSL

   # Open the following file
   sudo vim /etc/nginx/snippets/ssl-params.conf
   
   # Paste the following from https://cipherli.st/ (follow the link for more info)
   ssl_protocols TLSv1.3 TLSv1.2 TLSv1.1 TLSv1;
   ssl_prefer_server_ciphers on;
   ssl_ciphers ECDHE-RSA-AES256-GCM-SHA512:DHE-RSA-AES256-GCM-SHA512:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384;
   ssl_ecdh_curve secp384r1; # Requires nginx >= 1.1.0
   ssl_session_timeout  10m;
   ssl_session_cache shared:SSL:10m;
   ssl_session_tickets off; # Requires nginx >= 1.5.9
   ssl_stapling on; # Requires nginx >= 1.3.7
   ssl_stapling_verify on; # Requires nginx => 1.3.7
   resolver 208.67.222.222 208.67.220.220 valid=300s;
   resolver_timeout 5s;
   add_header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload";
   add_header X-Frame-Options DENY;
   add_header X-Content-Type-Options nosniff;
   add_header X-XSS-Protection "1; mode=block";
   
   
   # Paste this at the bottom of the file
   ssl_dhparam /etc/ssl/certs/dhparam.pem;
   

5. Configure the server to use SSL

   ATTENTION: Replace all the example.com with your domain

   # Open the following file
   sudo vim /etc/nginx/sites-enabled/default
   
   # Paste the following bellow the existing config
   server {
       listen 443 ssl http2;
       listen [::]:443 ssl http2;
       server_name example.com; # REPLACE HERE
   
       ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; # REPLACE HERE
       ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; # REPLACE HERE
   
       include snippets/ssl-params.conf;
   
       location / {
           proxy_set_header X-Real-IP $remote_addr;
           proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
           proxy_set_header X-NginX-Proxy true;
           proxy_set_header Upgrade $http_upgrade;
           proxy_set_header Connection 'upgrade';
           proxy_pass http://localhost:5000/;
           proxy_ssl_session_reuse off;
           proxy_set_header Host $http_host;
           proxy_pass_header Server;
           proxy_cache_bypass $http_upgrade;
           proxy_redirect off;
       }
   }
   

6. Test the Nginx config

   $ sudo nginx -t
   > nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
   > nginx: configuration file /etc/nginx/nginx.conf test is successful
   

7. Start Nginx

   sudo systemctl start nginx
   

8. Finally, test your app by visiting your domain on your browser!

For newer OS: sudo apt-get install python3-certbot-nginx

A very useful Nginx SSL configuration file. Previously, the configuration I did myself often couldn't be accessed through Safari, but now I can smoothly access my service. Thank you very much.

😭 same as before

I resolved this issue by updating nginx from version 1.20.1 installed via yum on CentOS to the self-compiled version 1.24.0.

Thank you! Very helpful..

#Thanks