nest.devicetype.groovy

/**
 *  ps_Nest Thermostat
 *
 *  Copyright 2014 Patrick Stuart
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *
 *  Original Author: [email protected]
 *	Author: [email protected]
 *  Original Code: https://github.com/smartthings-users/device-type.nest
 *
 * INSTALLATION
 * =========================================
 * 1) Create a new device type (https://graph.api.smartthings.com/ide/devices)
 *     Name: Nest
 *     Author: [email protected]
 *     Capabilities:
 *         Polling
 *         Relative Humidity Measurement
 *         Thermostat
 *     Custom Attributes:
 *         presence
 *     Custom Commands:
 *         away
 *         present
 *         setPresence
 *
 * 2) Create a new device (https://graph.api.smartthings.com/device/list)
 *     Name: Your Choice
 *     Device Network Id: Your Choice
 *     Type: Nest (should be the last option)
 *     Location: Choose the correct location
 *     Hub/Group: Leave blank
 *
 * 3) Update device preferences
 *     Click on the new device to see the details.
 *     Click the edit button next to Preferences
 *     Fill in your information.
 *     To find your serial number, login to http://home.nest.com. Click on the thermostat 
 *     you want to control. Under settings, go to Technical Info. Your serial number is 
 *     the second item.
 *
 * 4) That's it, you're done.
 *     
 * Copyright (C) 2013 Brian Steere <[email protected]>
 * Permission is hereby granted, free of charge, to any person obtaining a copy of this 
 * software and associated documentation files (the "Software"), to deal in the Software 
 * without restriction, including without limitation the rights to use, copy, modify, 
 * merge, publish, distribute, sublicense, and/or sell copies of the Software, and to 
 * permit persons to whom the Software is furnished to do so, subject to the following 
 * conditions: The above copyright notice and this permission notice shall be included 
 * in all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
 * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
 * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 
 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF 
 * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
 * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

preferences {
    input("username", "text", title: "Username", description: "Your Nest username (usually an email address)")
    input("password", "password", title: "Password", description: "Your Nest password")
    input("serial", "text", title: "Serial #", description: "The serial number of your thermostat")
}
 
 // for the UI
metadata {
    definition (name: "Nest Thermostat", author: "[email protected]") {
        capability "Polling"
        capability "Relative Humidity Measurement"
        capability "Thermostat"

        attribute "presence", "string"

        command "away"
        command "present"
        command "setPresence"
        command "setTempUp"
        command "setTempDown"
        command "setTempUpHeat"
        command "setTempDownHeat"
	}
    simulator {
    
    }

    tiles {
        valueTile("temperature", "device.temperature", width: 1, height: 1, canChangeIcon: false) {
            state("temperature", label: '${currentValue}°', unit:"F", backgroundColors: [
                    [value: 31, color: "#153591"],
                    [value: 44, color: "#1e9cbb"],
                    [value: 59, color: "#90d2a7"],
                    [value: 74, color: "#44b621"],
                    [value: 84, color: "#f1d801"],
                    [value: 95, color: "#d04e00"],
                    [value: 96, color: "#bc2323"]
                ]
            )
        }
        
        standardTile("TempUp", "device.button") { state "Cool Up", label:'${name}', action:"setTempUp", icon: "st.thermostat.thermostat-up"}
        standardTile("TempDown", "device.button") { state "Cool Down", label:'${name}', action:"setTempDown", icon: "st.thermostat.thermostat-down", backgroundColor: '#ffffff'}
        
        standardTile("TempUpHeat", "device.button") { state "Heat Up", label:'${name}', action:"setTempUpHeat", icon: "st.thermostat.thermostat-up"}
        standardTile("TempDownHeat", "device.button") { state "Heat Down", label:'${name}', action:"setTempDownHeat", icon: "st.thermostat.thermostat-down", backgroundColor: '#ffffff'}
        
        
        standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
            state "heat", label:'', action:"thermostat.heat", icon: "st.thermostat.heat", backgroundColor: '#E14902'
            state "cool", label:'', action:"thermostat.cool", icon: "st.thermostat.cool", backgroundColor: '#003CEC'
            state "range", label:'', action:"thermostat.auto", icon: "st.thermostat.auto", backgroundColor: '#000000'
            state "off", label:'', action:"thermostat.off", icon: "st.thermostat.heating-cooling-off"
        }
        standardTile("thermostatFanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
            state "auto", label:'', action:"thermostat.fanOn", icon: "st.thermostat.fan-auto"
            state "on", label:'', action:"thermostat.fanCirculate", icon: "st.thermostat.fan-on"
            state "circulate", label:'', action:"thermostat.fanAuto", icon: "st.thermostat.fan-circulate"
        }
        valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
            state "default", label:'${currentValue}°', unit:"F", backgroundColor:"#ffffff", icon:""
        }
        
        valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
            state "default", label:'${currentValue}°', unit:"F", backgroundColor:"#ffffff", icon:""
        }
        
        valueTile("humidity", "device.humidity", inactiveLabel: false, decoration: "flat") {
            state "default", label:'${currentValue}%', unit:"Humidity"
        }
        standardTile("presence", "device.presence", inactiveLabel: false, decoration: "flat") {
            state "present", label:'${name}', action:"away", icon: "st.Home.home2"
            state "away", label:'${name}', action:"present", icon: "st.Transportation.transportation5"
        }
        standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
            state "default", action:"polling.poll", icon:"st.secondary.refresh"
        }
        main "temperature"
        details(["temperature", "thermostatMode",  "thermostatFanMode", "TempUp", "TempDown", //"coolSliderControl", 
        "coolingSetpoint", "TempUpHeat", "TempDownHeat", "heatingSetpoint", "humidity", "presence", "refresh"])
    }
}

// parse events into attributes
def parse(String description) {
    
}

def setTempUp() { 
def newtemp = device.currentValue("coolingSetpoint").toInteger() + 1
sendEvent(name: 'coolingSetpoint', value: newtemp)
setTargetTemp(newtemp)
}

def setTempDown() { 
def newtemp = device.currentValue("coolingSetpoint").toInteger() - 1
sendEvent(name: 'coolingSetpoint', value: newtemp)
setTargetTemp(newtemp)
}

def setTempUpHeat() { 
def newtemp = device.currentValue("heatingSetpoint").toInteger() + 1
sendEvent(name: 'heatingSetpoint', value: newtemp)
setCoolingSetpoint(newtemp)
}

def setTempDownHeat() { 
def newtemp = device.currentValue("heatingSetpoint").toInteger() - 1
sendEvent(name: 'heatingSetpoint', value: newtemp)
setHeatingSetpoint(newtemp)
}


// handle commands
def setHeatingSetpoint(temp) {
    setTargetTemp(temp)
}

def setCoolingSetpoint(temp) {
    setTargetTemp(temp)
}

def setTargetTemp(temp) {
def tmode = device.currentValue("thermostatMode")
if (tmode == "range")
{
log.debug "in auto mode about to send to api"
api('temperature', [
					'target_change_pending': true, 
                    'target_temperature_low': fToC(device.currentValue("heatingSetpoint")), 
                    'target_temperature_high': fToC(device.currentValue("coolingSetpoint")), 
                    'target_temperature': fToC(temp)
                    ]) {        }
}
else
{
	if (tmode == "heat")
    {
    api('temperature', ['target_change_pending': true, 'target_temperature': fToC(device.currentValue("heatingSetpoint"))]) {
                }
        }
        else if (tmode == "cool")
        {
        api('temperature', ['target_change_pending': true, 'target_temperature': fToC(device.currentValue("coolingSetpoint"))]) {
                }
        }
    }
}




def off() {
    setThermostatMode('off')
    log.debug "off"
}

def heat() {
    setThermostatMode('heat')
    log.debug "heat"
}

def emergencyHeat() {
    setThermostatMode('heat')
    log.debug "eheat"
}

def cool() {
    setThermostatMode('cool')
    log.debug "cool"
}

def auto() {
	def tmode = device.currentValue("thermostatMode")
	setThermostatMode(tmode)
    log.debug "auto Mode hit"
}

def setThermostatMode(mode) {
	log.debug "mode is $mode"
    // rotate through 4 options heat,cool, range, off
    switch (mode)
	{
	case 'heat' : 
    mode = "cool" 
    break
	case 'cool' : 
    mode = "range"
    break
	case 'range' : 
    mode = "off" 
    break
	case 'off' : 
    mode = "heat" 
    break
	default : 
    mode = "off" 
    break
	}
    
    api('thermostat_mode', ['target_change_pending': true, 'target_temperature_type': mode]) {
        sendEvent(name: 'thermostatMode', value: mode)
    }
}

def fanOn() {
    setThermostatFanMode('on')
}

def fanAuto() {
    setThermostatFanMode('auto')
}

def fanCirculate() {
    setThermostatFanMode('circulate')
}

def setThermostatFanMode(mode) {    
    def modes = [
        on: ['fan_mode': 'on'],
        auto: ['fan_mode': 'auto'],
        circulate: ['fan_mode': 'duty-cycle', 'fan_duty_cycle': 900]
    ]
    
    api('fan_mode', modes.getAt(mode)) {
        sendEvent(name: 'thermostatFanMode', value: mode)
    }
}

def away() {
    setPresence('away')
}

def present() {
    setPresence('present')
}

def setPresence(status) {
    log.debug "Status: $status"
    api('presence', ['away': status == 'away', 'away_timestamp': new Date().getTime(), 'away_setter': 0]) {
        sendEvent(name: 'presence', value: status)
    }
}


def poll() {
    log.debug "Executing 'poll'"
    api('status', []) {
    log.debug data.shared
        data.device = it.data.device.getAt(settings.serial)
        data.shared = it.data.shared.getAt(settings.serial)
        data.structureId = it.data.link.getAt(settings.serial).structure.tokenize('.')[1]
        data.structure = it.data.structure.getAt(data.structureId)
                
        data.device.fan_mode = data.device.fan_mode == 'duty-cycle'? 'circulate' : data.device.fan_mode
        data.structure.away = data.structure.away? 'away' : 'present'
                
        sendEvent(name: 'humidity', value: data.device.current_humidity)
        sendEvent(name: 'temperature', value: cToF((data.shared.current_temperature) as Double).round(), state: data.device.target_temperature_type)
        sendEvent(name: 'thermostatFanMode', value: data.device.fan_mode)
        sendEvent(name: 'thermostatMode', value: data.shared.target_temperature_type)
        //if temp type is ranged otherwise use target_temp
        if (data.shared.target_temperature_type == "range")
        {
        sendEvent(name: 'coolingSetpoint', value: cToF((data.shared.target_temperature_high) as Double).round()) 
        sendEvent(name: 'heatingSetpoint', value: cToF((data.shared.target_temperature_low) as Double).round())
        }
        else if (data.shared.target_temperature_type == "cool")
        {
        sendEvent(name: 'coolingSetpoint', value: cToF((data.shared.target_temperature) as Double).round())
        }
        else if (data.shared.target_temperature_type == "heat")
        {
        sendEvent(name: 'heatingSetpoint', value: cToF((data.shared.target_temperature) as Double).round())
        }
        else
        {
        sendEvent(name: 'coolingSetpoint', value: 0) //changed for auto mode for heat/cool?
        sendEvent(name: 'heatingSetpoint', value: 0)
        }
        
        sendEvent(name: 'presence', value: data.structure.away)
    }
}

def api(method, args = [], success = {}) {
    if(!isLoggedIn()) {
        log.debug "Need to login"
        login(method, args, success)
        return
    }

    def methods = [
        'status': [uri: "/v2/mobile/${data.auth.user}", type: 'get'],
        'fan_mode': [uri: "/v2/put/device.${settings.serial}", type: 'post'],
        'thermostat_mode': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
        'temperature': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
        'presence': [uri: "/v2/put/structure.${data.structureId}", type: 'post']
    ]
    
    def request = methods.getAt(method)
    log.debug method
    log.debug "Logged in"
    log.debug "Arguments to send are : $args"
    doRequest(request.uri, args, request.type, success)
}

// Need to be logged in before this is called. So don't call this. Call api.
def doRequest(uri, args, type, success) {
    log.debug "Calling $type : $uri : $args"
    
    if(uri.charAt(0) == '/') {
        uri = "${data.auth.urls.transport_url}${uri}"
    }
    
    def params = [
        uri: uri,
        headers: [
            'X-nl-protocol-version': 1,
            'X-nl-user-id': data.auth.userid,
            'Authorization': "Basic ${data.auth.access_token}"
        ],
        body: args
    ]
    
    try {
        if(type == 'post') {
            httpPostJson(params, success)
        } else if (type == 'get') {    
            httpGet(params, success)
        }
    } catch (Throwable e) {
        login()
    }
}

def login(method = null, args = [], success = {}) {    
    def params = [
        uri: 'https://home.nest.com/user/login',
        body: [username: settings.username, password: settings.password]
    ]   
    
    httpPost(params) {response -> 
        data.auth = response.data
        data.auth.expires_in = Date.parse('EEE, dd-MMM-yyyy HH:mm:ss z', response.data.expires_in).getTime()
        log.debug data.auth
        
        api(method, args, success)
    }
}

def isLoggedIn() {
    if(!data.auth) {
        log.debug "No data.auth"
        return false
    }
    
    def now = new Date().getTime();
    return data.auth.expires_in > now
}

def cToF(temp) {
    return temp * 1.8 + 32
}

def fToC(temp) {
    return (temp - 32) / 1.8
}