Easy Brew PHP version switching (Now moved to https://github.com/rhukster/sphp.sh)

sphp.sh

#!/bin/bash
# Creator: Phil Cook
# Modified: Andy Miller
#
# >>> IMPORTANT: Moved to: https://github.com/rhukster/sphp.sh
# >>> Kept here for legacy purposes
#
osx_major_version=$(sw_vers -productVersion | cut -d. -f1)
osx_minor_version=$(sw_vers -productVersion | cut -d. -f2)
osx_patch_version=$(sw_vers -productVersion | cut -d. -f3)
osx_patch_version=${osx_patch_version:-0}
osx_version=$((${osx_major_version} * 10000 + ${osx_minor_version} * 100 + ${osx_patch_version}))
homebrew_path=$(brew --prefix)
brew_prefix=$(brew --prefix | sed 's#/#\\\/#g')

brew_array=("5.6","7.0","7.1","7.2","7.3","7.4","8.0","8.1","8.2")
php_array=("[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]")
php_installed_array=()
php_version="php@$1"
php_opt_path="$brew_prefix\/opt\/"

php5_module="php5_module"
apache_php5_lib_path="\/lib\/httpd\/modules\/libphp5.so"
php7_module="php7_module"
apache_php7_lib_path="\/lib\/httpd\/modules\/libphp7.so"
php8_module="php_module"
apache_php8_lib_path="\/lib\/httpd\/modules\/libphp.so"

native_osx_php_apache_module="LoadModule ${php5_module} libexec\/apache2\/libphp5.so"
if [ "${osx_version}" -ge "101300" ]; then
    native_osx_php_apache_module="LoadModule ${php7_module} libexec\/apache2\/libphp7.so"
fi

# Has the user submitted a version required
if [[ -z "$1" ]]; then
    echo "usage: sphp version [-s|-s=*] [-c=*]"
    echo
    echo "    version    one of:" ${brew_array[@]}
    echo
    exit
fi

php_module="$php5_module"
apache_php_lib_path="$apache_php5_lib_path"

simple_php_version=$(echo "$php_version" | sed 's/^php@//' | sed 's/\.//')
if [[ simple_php_version -ge 70 && simple_php_version -lt 80 ]]; then
    php_module="$php7_module"
    apache_php_lib_path="$apache_php7_lib_path"
elif [[ simple_php_version -ge 80 ]]; then  
    php_module="$php8_module"
    apache_php_lib_path="$apache_php8_lib_path"
fi

apache_change=1
apache_conf_path="$homebrew_path/etc/httpd/httpd.conf"
apache_php_mod_path="$php_opt_path$php_version$apache_php_lib_path"

# What versions of php are installed via brew
for i in ${php_array[*]}; do
    version=$(echo "$i" | sed 's/^php@//')
    if [[ -d "$homebrew_path/etc/php/$version" ]]; then
        php_installed_array+=("$i")
    fi
done

# Check that the requested version is supported
if [[ " ${php_array[*]} " == *"$php_version"* ]]; then
    # Check that the requested version is installed
    if [[ " ${php_installed_array[*]} " == *"$php_version"* ]]; then

        # Switch Shell
        echo "Switching to $php_version"
        echo "Switching your shell"
        for i in ${php_installed_array[@]}; do
            brew unlink $i
        done
        brew link --force "$php_version"

        # Switch apache
        if [[ $apache_change -eq 1 ]]; then
            echo "Switching your apache conf"

            for j in ${php_installed_array[@]}; do
                loop_php_module="$php5_module"
                loop_apache_php_lib_path="$apache_php5_lib_path"
                loop_php_version=$(echo "$j" | sed 's/^php@//' | sed 's/\.//')
                if [[ loop_php_version -ge 70 && loop_php_version -lt 80 ]]; then
                    loop_php_module="$php7_module"
                    loop_apache_php_lib_path="$apache_php7_lib_path"
                elif [[ loop_php_version -ge 80 ]]; then  
                    loop_php_module="$php8_module"
                    loop_apache_php_lib_path="$apache_php8_lib_path" 
                fi
                apache_module_string="LoadModule $loop_php_module $php_opt_path$j$loop_apache_php_lib_path"
                comment_apache_module_string="#$apache_module_string"

                # If apache module string within apache conf
                if grep -q "$apache_module_string" "$apache_conf_path"; then
                    # If apache module string not commented out already
                    if ! grep -q "$comment_apache_module_string" "$apache_conf_path"; then
                        sed -i.bak "s/$apache_module_string/$comment_apache_module_string/g" $apache_conf_path
                    fi
                # Else the string for the php module is not in the apache config then add it
                else
                    sed -i.bak "/$native_osx_php_apache_module/a\\
$comment_apache_module_string\\
" $apache_conf_path
                fi
            done
            sed -i.bak "s/\#LoadModule $php_module $apache_php_mod_path/LoadModule $php_module $apache_php_mod_path/g" $apache_conf_path
            echo "Restarting apache"
            brew services stop httpd
            brew services start httpd
        fi

	echo ""
        php -v
        echo ""

        echo "All done!"
    else
        echo "Sorry, but $php_version is not installed via brew. Install by running: brew install $php_version"
    fi
else
    echo "Unknown version of PHP. PHP Switcher can only handle arguments of:" ${brew_array[@]}
fi

It might be better not to restrict the PHP version, and instead use Homebrew error codes to detect when a version isn't available. With the shivammathur/php tap, at the time of writing this comment, there's [email protected] and [email protected]. And PHP is on a relatively fast release cycle with 8.1 planned to be released later this year (2021), and 8.2 planned for 2022.

Aside, just to point out the competition, there's this package available in the homebrew/core tap: brew-php-switcher (lol, which is by Phil Cook 😁).

Hi guys, I end up using php versions like this. commenting latest version to use the old version on my .zshrc 😁

I do not know why but its always asking me to export those path exxept when switching to php8.

Work well, except when switching 7.x to 8.0: httpd.conf is well modified but php_info() stay at php 7.4. (it's ok for php cli).
Need to replace

           #brew services stop httpd
            #brew services start httpd
            sudo apachectl stop
            sleep 0.25
            sudo apachectl start

Yes same for me

Same here i get really random results and i have to restart apache few times.. Anyone have any insights why is this happening, never happened before i migrate to m1?

In my case, it was the use of sudo when restarting HTTPD in SPHP. The OS boots HTTPD without sudo but then when using SPHP, sudo triggers a second instance. You can verify by executing:

brew services list
sudo brew services list

is switching to php8.1 available?

@adrian-kumu replace lines 12+13 from:

brew_array=("5.6","7.0","7.1","7.2","7.3","7.4","8.0")
php_array=("[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]")

TO:

brew_array=("5.6","7.0","7.1","7.2","7.3","7.4","8.0","8.1")
php_array=("[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]")

Now the switch script is properly switching to php8.1

Updated for 8.1.

Not working for me on a freshly new install macos monterey, using a intel proc.
I installed php with brew install shivammathur/php/[email protected] and when i use sphp i have the following error message :
Sorry, but [email protected] is not installed via brew. Install by running: brew install [email protected]

@lchabrand, do you have PHP 7.3 installed because that's what it's complaining about. Also, checkout brew install brew-php-switcher, however I'm not sure how up-to-date it is. It works with PHP 8.1.

$ brew info brew-php-switcher
brew-php-switcher: stable 2.4 (bottled), HEAD
Switch Apache / Valet / CLI configs between PHP versions
https://github.com/philcook/php-switcher

I run nginx rather than apache, and always prefer FPM, so this approach doesn't work generically enough to support that kind of config. As a result, I much prefer @rozsival's approach, and so i just posted a fork of his script that supports PHP 8.1 and drops old versions that are no longer supported.

Note that it's also possible to set up a redirect on the macOS firewall so that you don't have to run nginx/apache on a privileged port, and you can then have it run on its default port 8080, and the firewall forwards traffic from port 80. This is much more robust that reconfiguring the web server every time.

@lchabrand wrote:

Not working for me on a freshly new install macos monterey, using a intel proc. I installed php with brew install shivammathur/php/[email protected] and when i use sphp i have the following error message : Sorry, but [email protected] is not installed via brew. Install by running: brew install [email protected]

I had the same problem. I changed line 58 to:
if [[ -d "$homebrew_path/opt/php@$version" ]]; then

But then had other problems with the php path. Realized it was because I originally installed php using the built in apache, then used brew to install apache AFTER I installed php, so I uninstalled my php files, example:
brew uninstall shivammathur/php/[email protected]

and then reinstalled them:
brew install shivammathur/php/[email protected]

then switched line 58 back to:
if [[ -d "$homebrew_path/etc/php/$version" ]]; then
I only installed the versions of php that I needed, so I found it helpful to list the php brew versions installed if I try to switch to one that isn't:

after line 119, which currently reads:
echo "Sorry, but $php_version is not installed via brew. Install by running: brew install $php_version."

I added a list of brew installed versions by removing the quote at the end of line 119 and adding a line afterwards to get a list of installed versions, so line 119 & 120 now read:
echo "Sorry, but $php_version is not installed via brew. Install by running: brew install $php_version.
Brew installed versions: " ${php_installed_array[@]}

It's that time of year again. Now that Homebrew has php 8.2 available the script needs a slight update to include 8.2.

The arrays near the top of the script brew_array and php_array can be updated as seen below.

## TODO: Update 'brew_array' and 'php_array' when new version of php are released
brew_array=("5.6","7.0","7.1","7.2","7.3","7.4","8.0","8.1","8.2")
php_array=("[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]")

Note: If you don't have 8.1 installed you'll see an error Error: No such keg: /usr/local/Cellar/[email protected]. Not that it's a big deal, but if it bothers you, then you can run brew install [email protected] or remove it from the above arrays.

For an Update for the PHP version to 8.2.. change those lines(12 and 13) to the ones below
brew_array=("5.6","7.0","7.1","7.2","7.3","7.4","8.0","8.1","8.2")
php_array=("[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]" "[email protected]")

I'm using GNU grep as default instead of MacOS's version of it, and since it was upgraded to 3.8, sphp started throwing warnings (8 per installed php version):

grep: warning: stray \ before /

I understand that the backslash is required as the regex is also used for sed, so I'm not quite sure how best to fix this. As a workaround I've modified sphp to call /usr/bin/grep.

@dregad, in addition to that change, I would remove the unnecessary escapes in the variable values altogether, and then do localized replacements for the sed calls by using something like ${apache_php_mod_path//\//\\\/} (the general form is ${VAR//PATTERN/REPLACE}).

Using the full path for every non-built-in command creates predictability in the script and reduces inconsistencies between user machines.

To help with consistency and to reduce maintenance, small wrapper functions can be written inside the script for each non-built-in. For example:

grep() {
  /usr/bin/grep "$@"
}

Then grep can be used without a path or backslash prefix in the rest of the script.

I would also run the script through ShellCheck and shfmt.

If anyone wants to rewrite the script and optimize it, I will gladly test it!

@rhukster thanks for considering this as a permanent change to sphp script.

Since Gists do not allow pull requests, how would you like to receive contributions ? Is a simple comment here with a patch OK, or would you prefer to get the changes from a fork of the Gist ?

I might just move this to a full repo. Overkill for one file generally but in these situations PRs and issues would be helpful.

Let me do that today.

@rhukster just wondering if you ever got around to creating a repo for this script to allow contributions via pull requests. If so, a link would be nice as I didn't find it.

Dang forgot all about it.. going to create that repo now.

@rhukster just wondering if you ever got around to creating a repo for this script to allow contributions via pull requests. If so, a link would be nice as I didn't find it.

Here it is: https://github.com/rhukster/sphp.sh

Thanks @rhukster. FYI you forgot to update a link in your blog article, PHP Switcher Script in the paragraph after the subtitle still points to Gist.

cheers, will update that too.