darinwilson

##############################################
## Example 1 - play a note
play 60


##############################################
## Example 2 - play 4 random notes
4.times do
  play rrand_i(60, 90)
  sleep 0.5

graste

File activity

strace -e trace=file -fp PID (file) or strace -e trace=desc -fp PID (file descriptors)

Common calls:

• access
• close – close file handle
• fchmod – change file permissions
• fchown – change file ownership

joepie91

Don't use VPN services.

No, seriously, don't. You're probably reading this because you've asked what VPN service to use, and this is the answer.

Note: The content in this post does not apply to using VPN for their intended purpose; that is, as a virtual private (internal) network. It only applies to using it as a glorified proxy, which is what every third-party "VPN provider" does.

• A Russian translation of this article can be found here, contributed by Timur Demin.
• A Turkish translation can be found here, contributed by agyild.
• There's also this article about VPN services, which is honestly better written (and has more cat pictures!) than my article.

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

oanhnn

Problem

I have two Github accounts: oanhnn (personal) and superman (for work). I want to use both accounts on same computer (without typing password everytime, when doing git push or pull).

Solution

Use ssh keys and define host aliases in ssh config file (each alias for an account).

How to?

1. Generate ssh key pairs for accounts and add them to GitHub accounts.

eerwitt

# Typical setup to include TensorFlow.
import tensorflow as tf

# Make a queue of file names including all the JPEG images files in the relative
# image directory.
filename_queue = tf.train.string_input_producer(
    tf.train.match_filenames_once("./images/*.jpg"))

# Read an entire image file which is required since they're JPEGs, if the images
# are too large they could be split in advance to smaller files or use the Fixed

oleq

What is this all about?

This tutorial will turn your Raspberry PI into a simple Bluetooth audio receiver, which plays music through connected speakers. It's like a regular car audio system, but it can be used anywhere and it's a good value.

   Audio source (i.e. smartphone) 
                |
                v
 (((  Wireless Bluetooth Channel  )))
 |

EderSantana

Code for Keras plays catch blog post

Train

python qlearn.py

Test

1. Generate figures

gabonator

Cheap chinese IP camera with H264 encoding based on Hisilicon 8M (Hi3518E) chip

Video stream url for VLC/DVR:

• rtsp://192.168.1.93:554/user=admin&password=&channel=&stream=.sdp?real_stream--rtp-caching=100

Telnet access

• telnet 192.168.1.10 23
• Localhost login: root
• Password: xmhdipc

fchollet

'''This script goes along the blog post
"Building powerful image classification models using very little data"
from blog.keras.io.
It uses data that can be downloaded at:
https://www.kaggle.com/c/dogs-vs-cats/data
In our setup, we:
- created a data/ folder
- created train/ and validation/ subfolders inside data/
- created cats/ and dogs/ subfolders inside train/ and validation/
- put the cat pictures index 0-999 in data/train/cats