This gist shows how to estimate a doubly censored (i.e daily data) and right truncated (i.e due to epidemic phase) distribution using the brms package.

interveral-censored-right-truncated-distribution-estimation-with-brms.R

# Load packages
library(brms)
library(cmdstanr)
library(data.table) # here we use the development version of data.table install it with data.table::update_dev_pkg
library(purrr)

# Set up parallel cores
options(mc.cores = 4)

# Simulate some truncated and truncation data
init_cases <- 100
growth_rate <- 0.1
max_t <- 20
samples <- 400
# note we actually won't end up with this many samples as some will be truncated
logmean <- 1.6
logsd <- 0.6

# Simulate the underlying outbreak structure assuming exponential growth
cases <- data.table(
  cases = (init_cases * exp(growth_rate * (1:max_t))) |>
    map_dbl(~ rpois(1, .)),
  time = 1:max_t
)

plot(cases$cases)

# Make a case line list
linelist <- cases |>
  DT(, .(id = 1:cases), by = time)

# Simulate the observation process for the line list
obs <- data.table(
  time = sample(linelist$time, samples, replace = FALSE),
  delay = rlnorm(samples, logmean, logsd)
) |>
# Add a new ID
  DT(, id := 1:.N) |>
# When would data be observed
  DT(, obs_delay := time + delay) |>
# Integerise delay
  DT(, daily_delay := floor(delay)) |>
# Day after observations
  DT(, day_after_delay := ceiling(delay)) |>
# Time observe for
  DT(, obs_time := max_t - time) |>
# We don't know this exactly so need to censor
# Set to the midday point as average across day
  DT(, censored_obs_time := obs_time - 0.5) |>
  DT(, censored := "interval")

# Make event based data for latent modelling
obs <- obs |>
  DT(, primary_event := floor(time)) |>
  DT(, secondary_event := floor(obs_delay)) |>
  DT(, max_t := max_t)

# Truncate observations
truncated_obs <- obs  |>
  DT(obs_delay <= max_t)

double_truncated_obs <- truncated_obs |>
# The lognormal family in brms does not support 0 so also truncate delays > 1
# This seems like it could be improved
  DT(daily_delay >= 1)


# Fit lognormal model with no corrections
naive_model <- brm(
  bf(daily_delay ~ 1, sigma ~ 1), data = double_truncated_obs,
  family = lognormal(), backend = "cmdstanr", adapt_delta = 0.9
)

# We see that the log mean is truncated
# the sigma_intercept needs to be exponentiated to return the log sd
summary(naive_model)

# Adjust for truncation
trunc_model <- brm(
  bf(daily_delay | trunc(lb = 1, ub = censored_obs_time) ~ 1, sigma ~ 1),
  data = double_truncated_obs, family = lognormal(),
  backend = "cmdstanr", adapt_delta = 0.9
)

# Getting closer to recovering our simulated estimates
summary(trunc_model)

# Correct for censoring
censor_model <- brm(
  bf(daily_delay | cens(censored, day_after_delay) ~ 1, sigma ~ 1),
  data = double_truncated_obs, family = lognormal(),
  backend = "cmdstanr", adapt_delta = 0.9
)

# Less close than truncation but better than naive model
summary(censor_model)

# Correct for double interval censoring and truncation
censor_trunc_model <- brm(
  bf(
    daily_delay | trunc(lb = 1, ub = censored_obs_time) +
      cens(censored, day_after_delay) ~ 1,
    sigma ~ 1
  ),
  data = double_truncated_obs, family = lognormal(), backend = "cmdstanr"
)

# Recover underlying distribution
# As the growth rate increases and with short delays we may still see a bias
# as we have a censored observation time
summary(censor_trunc_model)

# Model censoring as a latent process (WIP)
# For this model we need to use a custom  brms family and so
# the code is significantly more complex.

# Custom family for latent censoring and truncation
fit_latent_lognormal <- function(fn = brm, ...) {
  latent_lognormal <- custom_family(
    "latent_lognormal",
    dpars = c("mu", "sigma", "pwindow", "swindow"),
    links = c("identity", "log", "identity", "identity"),
    lb = c(NA, 0, 0, 0),
    ub = c(NA, NA, 1, 1),
    type = "real",
    vars = c("vreal1[n]", "vreal2[n]")
  )

  stan_funs <- "
  real latent_lognormal_lpdf(real y, real mu, real sigma, real pwindow,
                              real swindow, real sevent,
                              real end_t) {
    real p = y + pwindow;
    real s = sevent + swindow;
    real d = s - p;
    real obs_time = end_t - p;
    return lognormal_lpdf(d | mu, sigma) - lognormal_lcdf(obs_time | mu, sigma);
    }
  "

  stanvars <- stanvar(block = "functions", scode = stan_funs)

  # Set up shared priors ----------------------------------------------------
  priors <- c(
    prior(uniform(0, 1), class = "b", dpar = "pwindow", lb = 0, ub = 1),
    prior(uniform(0, 1), class = "b", dpar = "swindow", lb = 0, ub = 1)
  )

  fit <- fn(family = latent_lognormal, stanvars = stanvars, prior = priors, ...)

  return(fit)
}
# Fit latent lognormal model
latent_model <- fit_latent_lognormal(
  bf(primary_event | vreal(secondary_event, max_t) ~ 1, sigma ~ 1,
  pwindow ~ 0 + as.factor(id), swindow ~ 0 + as.factor(id)),
  data = truncated_obs, backend = "cmdstanr", fn = brm,
  adapt_delta = 0.95
)

# Should also see parameter recovery using this method though 
# run-times are much higher and the model is somewhat unstable.
summary(latent_model)

I've updated this for how think the censoring operates, see
https://gist.github.com/sbfnk/569ad82641d73286a355317e53d911cf

Catching up with the conversation above it seems to me that the relevant censoring interval, assuming all dates are reported correctly (as discrete_time = floor(continuous_time)) is [max(discrete_delay - 1, 0), discrete_delay + 1] as that's the range of possible continuous delays that could lead to a discrete delay of discrete_delay (i.e. the range of values for t2 - t1 that is consistent with floor(t2) - floor(t1) == discrete_delay). Note that this means censoring for a discrete delay of 0 is a special case, which I think makes sense.

I wrote this before reading @sbfnk's code and now realized why it's useful if people don't want to deal with the latent approach I'm confused why the censoring interval need to ever span 2 days. If all dates are reported correctly, such that p_dis = floor(p_con) and s_dis=floor(s_con), then the censoring interval for the first event is p_dis to p_dis+1 and for the second event is s_dis to s_dis+1 regardless of what the delay is. Maybe I'm missing something, but I think framing censoring in terms of p_dis and s_dis seems most clear to me rather than having to rely on the delay itself.

When p_dis - s_dis = 0, then the bounds we want to put on s_con is between p_lat and s_dis+1 where p_lat is the latent variable estimator for p_con. So we need a little more tweaking of the brms code than what we @seabbs initially wrote.

I also chatted with Jonathan on this topic another day and think we figured out why uniform prior is bad and good. Let's think of a generic case where all individuals who experience the first event between time p_1 and p_2 (neither of which need to be discrete values), get their primary event reported at time p_dis. Then, for a cohort of individuals who report their event at p_dis, the distribution of true event time should be proportional to the incidence between time p_1 and p_2. Same goes for the second event. So far we've been dealing with the exponential cases with daily time steps, which is a special case of this (p_1=floor(p_con) and p_2=p_1+1) and assuming a uniform prior for the inference. In this case, both p_lat and s_lat give biased estimates of p_con and s_con in the same direction. In this case, biases cancel out such that s_lat - p_lat give unbiased estimates of s_con - p_con!! So if we were dealing with a case where the primary event was happening during the growth phase and the secondary event was happening during the decay phase, we'll see the uniform bias pop out. Not sure how this works for the censoring without the latent case, but will work out simulations very very very soon (sorry, need to send something to Bryan this week).

Also invited @sbfnk to the repo (https://github.com/parksw3/dynamicaltruncation).

Nice - yes I agree its +-1 padding. Useful to phrase it as the flooring operation for both dates. I also like the use of bpmodels as the simulator (I was actually just looking at this for the write-up).

So if we were dealing with a case where the primary event was happening during the growth phase and the secondary event was happening during the decay phase, we'll see the uniform bias pop out. Not sure how this works for the censoring without the latent case, but will work out simulations very very very soon (sorry, need to send something to Bryan this week).

This is a really interesting point @parksw3!

@sbfnk see a crazy named branch of that repo for some fleshing out of the analysis skeleton.

I merged both branches so you can also look at the main branch