ESP8266 client demo for Firmata.js

blink-firmata-esp.js

/*
 * Update line 18 below to the ESP8266 board address
 *
 * Enable Serial debugging by uncommenting //#defin SERIAL_DEBUG in StandardFirmataWiFi
 * (save a copy of StandardFirmataWiFi first)
 *
 * On startup (you may have to reset the ESP board because it starts up really fast
 * view the Serial output to see the assigned IP address (if using DHCP)
 * Or if you want to give the board a static IP (not use DHCP) then uncomment the
 * following lines in wifiConfig.h and update to your chosen IP address:
 * #define STATIC_IP_ADDRESS  10,0,0,17
 * #define SUBNET_MASK        255,255,255,0 // REQUIRED for ESP8266_WIFI, ignored for others
 * #define GATEWAY_IP_ADDRESS 0,0,0,0       // REQUIRED for ESP8266_WIFI, ignored for others
 */
var Firmata = require("firmata").Board;
var EtherPortClient = require("etherport-client").EtherPortClient;
var board = new Firmata(new EtherPortClient({
  host: "10.0.0.17",
  port: 3030
}));

board.on("ready", function() {
  console.log("READY!");
  console.log(
    board.firmware.name + "-" +
    board.firmware.version.major + "." +
    board.firmware.version.minor
  );

  var state = 1;
  var lastVal = 0;

  this.pinMode(2, this.MODES.OUTPUT);

  setInterval(function() {
    // blinks the blue LED on a HUZZAH ESP8266 board
    // for other boards, wire an LED to pin 2 or change
    // the pin number below
    this.digitalWrite(2, (state ^= 1));
  }.bind(this), 500);

  // this does not seem to be working - need to look into it
  // one other thing is ESP uses a 1V reference for analog so
  // once this works, it will need scaling
  this.analogRead(0, function(value) {
    if (value != lastVal) {
      console.log(value);
    }
  });

});

Hello @soundanalogous did you ever get analogRead working on esp8266 with Firmata? TIA