Home Assistant Blueprint: Wake-up light alarm with sunrise effect

wake-up-light-alarm-with-sunrise-effect.yaml

blueprint:
  name: Wake-up light alarm with sunrise effect
  description:
    "A wake-up light alarm with a brightness and color temperature sunrise
    effect. Note: not manually executable!"
  domain: automation
  input:
    light_entity:
      name: Wake-up light entity
      description:
        The light to control. Turning it off during the sunrise will keep
        it off. Color temperature range is auto-detected.
      selector:
        entity:
          domain: light
    timestamp_sensor:
      name: Alarm timestamp sensor
      description:
        "Sensor with timestamp of next alarm with device_class: timestamp
        (set to 'none' for manual alarm time)"
      default: none
      selector:
        entity:
          device_class: timestamp
    manual_time:
      name: Manual alarm time
      description:
        Time to trigger alarm every day if timestamp sensor is not set.
        Settings at or shortly after midnight will not work as expected!
      default: "7:00:00"
      selector:
        time: {}
    check_entity:
      name: Additional entity to check before sunrise is triggered
      description:
        If set, checks if entity is 'on' or 'home' before triggering. Use
        e.g. a (workday) sensor, device_tracker or person entity.
      default: none
      selector:
        entity: {}
    sunrise_duration:
      name: Sunrise duration
      description:
        The sunrise will start the configured number of minutes before
        the timestamp.
      default: 25
      selector:
        number:
          min: 5.0
          max: 60.0
          step: 5.0
          unit_of_measurement: min
          mode: slider
    start_brightness:
      name: Minimum brightness
      description:
        The brightness to start with. Some lights ignore very low values
        and may turn on with full brightness instead!
      default: 1
      selector:
        number:
          min: 1.0
          max: 255.0
          step: 1.0
          mode: slider
    end_brightness:
      name: Maximum brightness
      description:
        The brightness will be transitioned from the minimum to the configured
        value.
      default: 254
      selector:
        number:
          min: 5.0
          max: 255.0
          step: 1.0
          mode: slider
    min_mired:
      name: Minimum color temperature
      description: "The minimum color temperature to use. (1  : lowest supported)"
      default: 1
      selector:
        number:
          min: 1.0
          max: 500.0
          step: 5.0
          mode: slider
          unit_of_measurement: mired
    pre_sunrise_actions:
      name: Pre-sunrise actions
      description: Optional actions to run before sunrise starts.
      default: []
      selector:
        action: {}
    post_sunrise_actions:
      name: Post-sunrise actions
      description: Optional actions to run after sunrise ends (around the alarm time).
      default: []
      selector:
        action: {}
  source_url: https://gist.github.com/triplepoint/1b9006ddec208a07fc0100a2a30110eb
variables:
  light_entity: !input "light_entity"
  sensor: !input "timestamp_sensor"
  sunrise_duration: !input "sunrise_duration"
  start_brightness: !input "start_brightness"
  end_brightness: !input "end_brightness"
  range_brightness: "{{ float(end_brightness)-float(start_brightness) }}"
  manual_time: !input "manual_time"
  seconds: "{{ float(sunrise_duration) * 60 }}"
  min_mired: !input "min_mired"
  start_mired: "{{ state_attr(light_entity, 'max_mireds') }}"
  end_mired: "{{ [state_attr(light_entity, 'min_mireds')|int(0), min_mired|int(0)]|max }}"
  tick_time: "{{ float(seconds) / float(range_brightness) }}"
  check_entity: !input "check_entity"
trigger:
  - platform: time_pattern
    minutes: "*"
condition: []
action:
  - wait_template: "{{ sensor == 'none' or as_timestamp(states(sensor), None) != None }}"
  - wait_template: "{{ 0 <
      as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())
      <= float(seconds)
      and states(check_entity) in ['unknown', 'on', 'home'] }}"
  - choose: []
    default: !input "pre_sunrise_actions"
  - condition: template
    value_template: "{{ sensor == 'none' or as_timestamp(states(sensor), None) != None }}"
  - condition: template
    value_template: "{{ 0 <
      as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())
      <= float(seconds)
      and states(check_entity) in ['unknown', 'on', 'home'] }}"
  - choose:
      - conditions:
          - "{{ state_attr(light_entity, 'min_mireds') != None }}"
        sequence:
          - service: light.turn_on
            data:
              brightness: "{{ start_brightness }}"
              color_temp_kelvin: "{{ 1000000 / start_mired }}"
            entity_id: !input "light_entity"
    default:
      - service: light.turn_on
        data:
          brightness: "{{ start_brightness }}"
        entity_id: !input "light_entity"
  - repeat:
      while:
        - "{{ sensor == 'none' or as_timestamp(states(sensor), None) != None }}"
        - "{{ 0 <
          as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())
          <= float(seconds) }}"
      sequence:
        - delay: "{{ tick_time }}"
        - choose:
            - conditions:
                - "{{ 0 < state_attr(light_entity, 'brightness') | int(0) < end_brightness | int }}"
                - "{{ sensor == 'none' or as_timestamp(states(sensor), None) != None }}"
                - "{{ 0 <
                  as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())
                  <= float(seconds) }}"
              sequence:
                - choose:
                    - conditions:
                        - "{{ state_attr(light_entity, 'min_mireds') != None }}"
                      sequence:
                        - service: light.turn_on
                          data:
                            brightness:
                              "{{ (float(end_brightness) - (float(range_brightness) *
                              (as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())) / float(seconds)))
                              | int(0) }}"
                            color_temp_kelvin:
                              "{{ 1000000 / ((float(end_mired) + (float(start_mired) - float(end_mired))
                              * ((as_timestamp(states(sensor) if sensor != 'none' else today_at(manual_time)) - as_timestamp(now())) / float(seconds)))
                              | int(0)) }}"
                          entity_id: !input "light_entity"
                  default:
                    - service: light.turn_on
                      data:
                        brightness:
                          "{{ (float(end_brightness) - (float(range_brightness) * (as_timestamp(states(sensor)
                          if sensor != 'none' else today_at(manual_time))
                          - as_timestamp(now())) / float(seconds))) | int(0) }}"
                      entity_id: !input "light_entity"
  - choose: []
    default: !input "post_sunrise_actions"
mode: single
max_exceeded: silent

Yeah that's what I've done, I updated the input like this:

    timestamp_sensor:
      name: Alarm timestamp sensor
      description:
        "Datetime helper with timestamp of next alarm or set to 'none' for manual alarm time"
      default: none
      selector:
        entity:
          filter:
          - domain:
            - input_datetime

I replaced the "timestamp_sensor" with your code and restarted home assistant. Sadly it's not starting the automation. Did you change something else in the code? Ad additional check, i use an input_boolean helper.

@Edocsyl Probably... I made quite a few changes to it so just stuck everything in my own gist at https://gist.github.com/lnlyssg/65e47876a767385e331300d440404a31 if you want to take a look and compare