Sysctl configuration for high performance

sysctl.conf

### KERNEL TUNING ###

# Increase size of file handles and inode cache
fs.file-max = 2097152

# Do less swapping
vm.swappiness = 10
vm.dirty_ratio = 60
vm.dirty_background_ratio = 2

# Sets the time before the kernel considers migrating a proccess to another core
kernel.sched_migration_cost_ns = 5000000

# Group tasks by TTY
#kernel.sched_autogroup_enabled = 0

### GENERAL NETWORK SECURITY OPTIONS ###

# Number of times SYNACKs for passive TCP connection.
net.ipv4.tcp_synack_retries = 2

# Allowed local port range
net.ipv4.ip_local_port_range = 2000 65535

# Protect Against TCP Time-Wait
net.ipv4.tcp_rfc1337 = 1

# Control Syncookies
net.ipv4.tcp_syncookies = 1

# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 15

# Decrease the time default value for connections to keep alive
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_keepalive_probes = 5
net.ipv4.tcp_keepalive_intvl = 15

### TUNING NETWORK PERFORMANCE ###

# Default Socket Receive Buffer
net.core.rmem_default = 31457280

# Maximum Socket Receive Buffer
net.core.rmem_max = 33554432

# Default Socket Send Buffer
net.core.wmem_default = 31457280

# Maximum Socket Send Buffer
net.core.wmem_max = 33554432

# Increase number of incoming connections
net.core.somaxconn = 65535

# Increase number of incoming connections backlog
net.core.netdev_max_backlog = 65536

# Increase the maximum amount of option memory buffers
net.core.optmem_max = 25165824

# Increase the maximum total buffer-space allocatable
# This is measured in units of pages (4096 bytes)
net.ipv4.tcp_mem = 786432 1048576 26777216
net.ipv4.udp_mem = 65536 131072 262144

# Increase the read-buffer space allocatable
net.ipv4.tcp_rmem = 8192 87380 33554432
net.ipv4.udp_rmem_min = 16384

# Increase the write-buffer-space allocatable
net.ipv4.tcp_wmem = 8192 65536 33554432
net.ipv4.udp_wmem_min = 16384

# Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks
net.ipv4.tcp_max_tw_buckets = 1440000
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1

Better not to blindly copy paste this config. It's more advisable to override this configs when stumped upon a related error.

net.ipv4.tcp_rfc1337 = 1

Actually complies with rfc1337, and does "not" provide the protection, needs to be set to 0. Info is in the source code.

net.ipv4.tcp_tw_recycle =1 is dangerous will break connectivity to NAT users, this sysctl has now been removed in new kernels.

Also the default rmem and wmem are set way too high, a recipe for resource exhaustion.

net.ipv4.tcp_rfc1337 = 1

Actually complies with rfc1337, and does "not" provide the protection, needs to be set to 0. Info is in the source code.

No. By my reading of the source code, tcp_rfc1337 = 1 does protect against time-wait assassinations. See https://serverfault.com/questions/787624/why-isnt-net-ipv4-tcp-rfc1337-enabled-by-default#comment1380898_789212

Hi I have couple of questions regarding buffer tunnings.

• Why there are different values for TCP and UDP for buffers? net.ipv4.tcp_mem = 786432 1048576 26777216
  net.ipv4.udp_mem = 65536 131072 262144

• net.ipv4.tcp_wmem = 8192 65536 33554432 seams double value for most of the recommodations. How do you end up with those values? What is MTU value that your are considering?

• Did you consider any offloading cappacity for the NIC like segmentation offloading and e.t.c.

these a typo here, 26777216 should be 16777216 , 16777216 is 1<<24, or exactly 16MiB

Better not to blindly copy paste this config.

absolutely!
if you search the internet for 26777216, there's a lot of this typo almost all in sysctl.conf. I'm wondering where's the source of this.