Andy Hempel vondraussen
fritzw
/ bambulab-discover.ps1
Last active
October 15, 2024 07:41
PowerShell script to make BambuStudio discover a specific printer by IP address, even if it is not on the same subnet (see BambuStudio Issue #702)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on. | |
| # | |
| # Ensure your PC has firewall pot 2021/udp open. This is required as the proper response would usually go to the ephemeral source port that the M-SEARCH ssdp:discover message. | |
| # But we are are blindly sending a response directly to the BambuStudio listening service port (2021/udp). | |
| # | |
| # Temporary solution to BambuStudio not allowing you to manually specify the Printer IP. | |
| # | |
| # Author(s): gashton <https://github.com/gashton>, Fritz webering <https://github.com/fritzw> | |
| # | |
| param ( |
InToSSH
/ esphome_venetian_blind.yaml
Last active
October 26, 2024 11:09
ESPHome - Venetian Blind example with time-based cover control and tilt with Shelly2.5
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This is an example yaml config file for ESPHome to control Venetian blinds with one motor, where turning on the motor in 'up' direction first fully tilts open the blind then starts moving up, and vice versa, in 'down' direction first tilts blind closed, then starts moving down. | |
| # AUTHOR: InToSSH - github.com/InToSSH | |
| substitutions: | |
| device_name: Living Room Cover | |
| esphome: | |
| name: living_room_blind | |
| platform: ESP8266 | |
| board: esp01_1m |