Getting NordVPN WireGuard details

GetNordVPNWireGuardDetails.md

About

Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.

Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27

Prerequisites

If you have any linux machine, use that or install a vm if you don't have one.

Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx

Fetching details

Connect to nordvpn with command: nordvpn connect (don't forget to login with nordvpn login --legacy).

Fetch (your) IP address

After successful connection run

ifconfig nordlynx

Fetch your private key

Run

sudo wg show nordlynx private-key

Output of this command should be something like this:

CKMAE9LARlt2eZHgGnNaSUYiKllKJN7f3hed/bWm5E8=

The key above is just a random key for demo purposes.

Fetch your public key

Run

sudo wg show nordlynx public-key

Output of this command should be something like this:

TO158iXbNXt2eZHgGnNaSUYiKZHgGN7f3hed/bWm5E8=

The key above is just a random key for demo purposes.

Fetch server details

Make sure you have curl and jq installed on your host/router. These are needed to be able to fetch the config of NordVPN Server. If not installed, go ahead and install

opkg install curl jq

After installation enter the command below to fetch the recommended server config:

curl -s "https://api.nordvpn.com/v1/servers/recommendations?&filters\[servers_technologies\]\[identifier\]=wireguard_udp&limit=1"|jq -r '.[]|.hostname, .station, (.locations|.[]|.country|.city.name), (.locations|.[]|.country|.name), (.technologies|.[].metadata|.[].value), .load'

Output:

uk1818.nordvpn.com #your endpoint host
178.239.166.185 #its ip address
London #city
United Kingdom #country
K53l2wOIHU3262sX5N/5kAvCvt4r55lNui30EbvaDlE= #Server public key
10 #Server load at the time.

Or just visit the following url https://api.nordvpn.com/v1/servers/recommendations?&filters\[servers_technologies\]\[identifier\]=wireguard_udp&limit=1 from your browser and look for the details manually.

curl -s -u token:<ACCESS_TOKEN> https://api.nordvpn.com/v1/users/services/credentials

Worked fine for me thanks @dumbasPL

Interesting way to retrieve the credentials, thanks for sharing! Maybe we can add that to https://github.com/dvcrn/generate-nordvpn-wgconf/ as another way to fetch the necessary creds besides just osxkeychain or manual specifying

For anyone wondering how to set this up on a FRITZ!Box router here's how I did it

1. Follow the steps
2. Create a config (.conf) file and write as follows:

[Interface]
PrivateKey = {YOUR PRIVATE KEY} # sudo wg show nordlynx private-key (step 2)
Address = 10.5.0.2/32 # don't change this as it's always the same
DNS = {A DNS SERVER} # I used 8.8.8.8
 
[Peer]
PublicKey = {ENDPOINT PUBLIC KEY} # step 4
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = {ENDPOINT HOST}:51820 # ex. uk1818.nordvpn.com (step 4)

3. Log in the router's interface
4. Go to Internet > Permit Access > VPN (Wireguard)
5. Click Add Connection and then click "Connect networks or establish special connections", then "Next"
6. "Has this WireGuard connection already been set up at the remote connection?" click "Yes" and then "Next"
7. Enter a name for the connection
8. Upload the .conf file you created
9. Enable the option "Send all network traffic via the VPN connection"
10. Click "Finish"

This worked perfectly for me on my FRITZ!Box 7590

Hey @dvcrn,

I've developed a NordVPN WireGuard Configuration Generator and Proxy Servers Fetcher tool inspired by your work. Unlike similar tools, mine offers a streamlined setup process, automatic server sorting for optimal performance, and categorized server organization by country and city for easy navigation. The tool also includes proxy server fetching from NordVPN's API and a multi-language support feature with versions available in Python, Go, and a web-based interface.

Check it out here: NordVPN WireGuard Configuration Generator

Your tool was a great starting point, and I've added enhancements such as improved server selection algorithms and flexible configuration options. I'd appreciate your feedback on my project.

Thanks for the inspiration!

Best regards.

This is GIVING thank you for your work. Incredible

Hey @dvcrn,
I've developed a NordVPN WireGuard Configuration Generator and Proxy Servers Fetcher tool inspired by your work. Unlike similar tools, mine offers a streamlined setup process, automatic server sorting for optimal performance, and categorized server organization by country and city for easy navigation. The tool also includes proxy server fetching from NordVPN's API and a multi-language support feature with versions available in Python, Go, and a web-based interface.
Check it out here: NordVPN WireGuard Configuration Generator
Your tool was a great starting point, and I've added enhancements such as improved server selection algorithms and flexible configuration options. I'd appreciate your feedback on my project.
Thanks for the inspiration!
Best regards.

This is GIVING thank you for your work. Incredible

Glad i could be of help :>

I currently can't check on the webinterface, but could someone with a subscription could check, if this leads to the key?:

https://my.nordaccount.com/dashboard/nordvpn/manual-configuration/authorize/
You'll need a key, that you will receive per mail to access those settings tho

Commandline seems to be the easiest option tho:

 jakami@kubuntu-1337  ~  sudo nordvpn connect                                             
Connecting to Germany #1058 (de1058.nordvpn.com)
You are connected to Germany #1058 (de1058.nordvpn.com)!
 jakami@kubuntu-1337  ~  sudo wg show nordlynx private-key
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Another way of getting the NordVPN server details you want (steps after installation of curl and jq):

1. Use the NordVPN site ([https://nordvpn.com/servers/tools/]) to get the hostname of a server you desire. Feel free to use the server preferences on the right and/or advanced options

2. Copy the hostname of the desired server (this will be in the format of e.g. "us8261.nordvpn.com")

3. In the terminal type in the following, replace the ##HOSTNAME## with the above hostname:
   curl --silent "https://api.nordvpn.com/v1/servers?limit=16384" | jq --raw-output '.[] | select(.hostname == "##HOSTNAME##") | "\nServer: \(.name)\nHostname: \(.hostname)\nIP Address: \(.station)\nLocation: \(.locations.[].country.name) - \(.locations.[].country.city.name)\nType: \(.technologies.[].name)\nPubKey: \(.technologies.[].metadata.[].value)\nLoad: \(.load)\nStatus: \(.status)\n"'

4. Wait for a moment and the terminal will print out the required details for your desired host, e.g.:
   Server: United States #8261
Hostname: us8261.nordvpn.com
IP Address: 212.102.47.74
Location: United States - Seattle
Type: Wireguard
Public Key: 1GaNB9RbeGNzekcuRDcxTXvqtXWFe2K9GtUd+EjNuyI=
Load: 21
Status: online

I just want to say thank you to all those that posted. Running a simple python program made this incredibly easy, you guys are amazing.

For anyone using UDM Pro devices, you can setup a manual entry in the gui. Based on the notes in https://gist.github.com/bluewalk/7b3db071c488c82c604baf76a42eaad3?permalink_comment_id=4967841#gistcomment-4967841, the output of #2 goes in Private Key field, step #3 goes in Server Address (note the port#). Note the fixed value of Tunnel IP/Netmask. Add your preferred Primary/Secondary DNS Servers.

You can choose to route all, or just some of your devices through the VPN:

u could checkout my second web version for this project tryed to make it as easy as possible to get your configs u could find it at
https://nord-configs.onrender.com/

Another way of getting the NordVPN server details you want (steps after installation of curl and jq):

1. Use the NordVPN site ([https://nordvpn.com/servers/tools/]) to get the hostname of a server you desire. Feel free to use the server preferences on the right and/or advanced options
2. Copy the hostname of the desired server (this will be in the format of e.g. "us8261.nordvpn.com")
3. In the terminal type in the following, replace the ##HOSTNAME## with the above hostname:
   curl --silent "https://api.nordvpn.com/v1/servers?limit=16384" | jq --raw-output '.[] | select(.hostname == "##HOSTNAME##") | "\nServer: \(.name)\nHostname: \(.hostname)\nIP Address: \(.station)\nLocation: \(.locations.[].country.name) - \(.locations.[].country.city.name)\nType: \(.technologies.[].name)\nPubKey: \(.technologies.[].metadata.[].value)\nLoad: \(.load)\nStatus: \(.status)\n"'
4. Wait for a moment and the terminal will print out the required details for your desired host, e.g.:
   Server: United States #8261
Hostname: us8261.nordvpn.com
IP Address: 212.102.47.74
Location: United States - Seattle
Type: Wireguard
Public Key: 1GaNB9RbeGNzekcuRDcxTXvqtXWFe2K9GtUd+EjNuyI=
Load: 21
Status: online

Hello, what could be wrong if I got "jq: 1 compile error" ?

For my people under windows that don't have curl and jq, I have converted it to powershell:
https://gist.github.com/2-click/d3267354648bd6175db78ef171472e1d