Enable Apple Watch functions like ECG, Hypertension, Sleep Apnea Notify

readme.md

Update: It's better to use Bluetooth fake location app to unlock ALL functions.

By using AnyGo or iAnyGo or similar Apps. It's safe, easy, works on Win/Mac and can unlock everything within 3 minutes. But you need to pay for 1 month subscription.

General steps:

1. Power off the watch, use airplane mode or remove sim card from your phone.
2. On your computuer, connect to your phone with Bluetooth mode, following the guide of the fake location app, you may need turn off/on location service.
3. Move your location to USA, check your location on your phone in the Apple Maps app.
4. Open Health Checklist on phone in the Health app and turn on everything.
5. Connect your watch and check it.

For the details or trouble-shooting, see the comments below, like starting from https://gist.github.com/imReker/fba069c6cae7407509863b0ed78da2a7?permalink_comment_id=5889305#gistcomment-5889305 And this: https://gist.github.com/imReker/fba069c6cae7407509863b0ed78da2a7?permalink_comment_id=6286130#gistcomment-6286130

---

Original Content

Below are plist files for Apple Watch to Enable ECG, Atrial Fibrillation(IRNF), Sleep Apnea Notify. No AfiB History. After a lot of testing by the people in the comments, it looks like only ECG will work.
So just replace the first three files:

com.apple.HeartRate.notifications.plist
com.apple.HeartRate.plist
com.apple.private.health.feature-availability.plist

com.apple.HeartRate.notifications.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>MigrationVersion</key>
	<integer>1</integer>
	<key>EnableCardioFitnessNotifications_lastReconciledValue</key>
	<true/>
	<key>EnableBradycardiaDetection</key>
	<true/>
	<key>StationaryDiscordanceMinimumBPM</key>
	<integer>110</integer>
	<key>EnableAtrialFibrillationDetection</key>
	<true/>
	<key>EnableStationaryDiscordanceDetection</key>
	<true/>
	<key>BradycardiaThresholdBPM</key>
	<integer>50</integer>
	<key>EnableCardioFitnessNotifications</key>
	<true/>
</dict>
</plist>

com.apple.HeartRate.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>CompletedBuddyVersion</key>
	<integer>2</integer>
</dict>
</plist>

com.apple.private.health.feature-availability.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>DisableOxygenSaturationRecordingCompanionAnalysis</key>
	<dict>
		<key>userInfo</key>
		<dict/>
		<key>ruleIdentifier</key>
		<string>AlwaysFalse</string>
	</dict>
	<key>ExpireElectrocardiogramRecording</key>
	<dict>
		<key>userInfo</key>
		<dict/>
		<key>ruleIdentifier</key>
		<string>AlwaysFalse</string>
	</dict>
	<key>DisableOxygenSaturationRecording</key>
	<dict>
		<key>userInfo</key>
		<dict/>
		<key>ruleIdentifier</key>
		<string>AlwaysFalse</string>
	</dict>
	<key>DisableSleepApneaNotifications</key>
	<dict>
		<key>userInfo</key>
		<dict>
			<key>grouping</key>
			<string>OR</string>
			<key>rules</key>
			<array>
				<dict>
					<key>userInfo</key>
					<dict/>
					<key>ruleIdentifier</key>
					<string>AlwaysFalse</string>
				</dict>
				<dict>
					<key>userInfo</key>
					<dict>
						<key>ProductTypePrefix</key>
						<string>Watch6</string>
					</dict>
					<key>ruleIdentifier</key>
					<string>WatchProductTypeHasPrefix</string>
				</dict>
			</array>
		</dict>
		<key>ruleIdentifier</key>
		<string>CompoundRule</string>
	</dict>
	<key>ExpireBackgroundAtrialFibrillationDetection</key>
	<dict>
		<key>userInfo</key>
		<dict/>
		<key>ruleIdentifier</key>
		<string>AlwaysFalse</string>
	</dict>
	<key>ExpireAFibBurden</key>
	<dict>
		<key>userInfo</key>
		<dict/>
		<key>ruleIdentifier</key>
		<string>AlwaysFalse</string>
	</dict>
	<key>CountMobileAssetsDownloadedPast24Hours</key>
	<integer>338</integer>
</dict>
</plist>

com.apple.private.health.feature-properties.ElectrocardiogramRecordingV1.companion.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>AvailableRegionsContentVersion</key>
	<integer>2</integer>
	<key>AvailableRegionsVersion</key>
	<integer>1</integer>
	<key>AvailableRegions</key>
	<array>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>3</integer>
	</array>
	<key>CountrySetProvenance</key>
	<integer>3</integer>
	<key>UDIDeviceIdentifier</key>
	<string>(01)00190198909541(10)1.22B83</string>
	<key>YearOfRelease</key>
	<string>2024</string>
	<key>FeatureVersion</key>
	<string>1</string>
	<key>UpdateVersion</key>
	<string>1.22B83</string>
</dict>
</plist>

com.apple.private.health.feature-properties.SleepApneaNotifications.companion.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>AvailableRegionsContentVersion</key>
	<integer>4</integer>
	<key>AvailableRegionsVersion</key>
	<integer>1</integer>
	<key>AvailableRegions</key>
	<array>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>18446744073709551615</integer>
		<integer>3</integer>
	</array>
	<key>CountrySetProvenance</key>
	<integer>4</integer>
	<key>UDIDeviceIdentifier</key>
	<string>(01)00195949116209(10)1.22B83</string>
	<key>YearOfRelease</key>
	<string>2024</string>
	<key>FeatureVersion</key>
	<string>1</string>
	<key>UpdateVersion</key>
	<string>1.22B83</string>
</dict>
</plist>

com.apple.private.health.heart-rhythm.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>HKElectrocardiogramV1ToV2UpgradeBackgroundDelivered</key>
	<true/>
	<key>ElectrocardiogramWatchAppInstallIsAllowed</key>
	<true/>
	<key>HKElectrocardiogramV1ToV2UpgradeAlertDismissed</key>
	<true/>
	<key>HKAtrialFibrillationDetectionOnboardingCompleted</key>
	<integer>1</integer>
	<key>HKElectrocardiogramFirstRecordingCompleted</key>
	<true/>
	<key>PromimentUpgradeTileDismissed</key>
	<true/>
	<key>HKElectrocardiogramOnboardingCompleted</key>
	<integer>4</integer>
</dict>
</plist>

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?

Thanks!

P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?

Thanks!

P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.

You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section.
Or this https://uuzi.net/apple-watch-hypertension/

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.

You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

WOOWWWW THIS WORKED FOR ME THE FIRST TIME

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.

You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.
You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

It worked! I needed to use the paid version of AnyGo. So the trick as @imReker said is Bluetooth.

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.
You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

Same for me. No luck with either of the programs.

As I understand this, the only way App Health activates these Health features is when the Geolocation Check during the initial setup is determined via CELLULAR NETWORK, no just WiFi-VPN, GPS, Bluetooth or region. That might be the reason GPS spoofing is not working. iPhone must be connected to a cellular tower in an allowed country.

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.
You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

It worked! I needed to use the paid version of AnyGo. So the trick as @imReker said is Bluetooth.

Great! This is a very good news for everybody in this chat. It is a much easier and faster way than the backup with iMaze

@imReker can you please clarify "It's better to use bluetooth fake location app to unlock all functions." Do you know of an app that does this? Anything you can point us to please?
Thanks!
P.S. Ever since my ISP or mobile service provider spoofed my location to Ukraine, I was able to activate some of the features that were available then (e.g., ECG, Oxygen, Afib), but features like Sleep Apnea and Hypertension weren't available then. I would like to activate those two features as well.

Any apps that support Bluetooth LBS fake location, eg, AnyGo or iAnyGo (you need to pay for a month, or use some magic), move the location to USA, open Health Checklist on phone and turn on everything.
You can check https://www.tenorshare.tw/change-location/hypertension-notifications.html, start reading from 2.2 section. Or this https://uuzi.net/apple-watch-hypertension/

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

It worked! I needed to use the paid version of AnyGo. So the trick as @imReker said is Bluetooth.

Great! This is a very good news for everybody in this chat. It is a much easier and faster way than the backup with iMaze

A BIG THANK YOU to @imReker. I started on this journey after learning about the plist files on Reddit and have been watching and contributing to this forum for the past year. I’m glad we finally found a solution and I’m happy that I can use all the features of my Apple Watch. As you all agree, these things aren’t cheap and it’s frustrating to have these features locked. Nevertheless, locked no more. Thanks again!

Can confirm the paid version of AnyGo worked perfectly!

Can confirm the paid version of AnyGo worked perfectly!

does it work with windows or only on mac?

Great to see you guys succeeded.
Whether it's AnyGo or iAnyGo, any similar software that supports Bluetooth fake location (or works for Pokémon Go) will work. Just choose the cheaper software and buy it for a month (and you can share the account with your friends).

For myself, I choose the magic version, it also works, you need to find "free" version by yourself and use at your own risk.

---

@Bahramj69

does it work with windows or only on mac?

Windows also works (but AnyGo don't support bluetooth mode on windows), make sure the software says it support "Pro Mode" or "Pokemon Go"

---

@kashif789us

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

Make sure the Apple Watch is powered off. Follow the instructions in the software, for example, turning off cellular. Restart the Health app on your phone, then use the Health CheckList to enable each feature

Great to see you guys succeeded. Whether it's AnyGo or iAnyGo, any similar software that supports Bluetooth fake location (or works for Pokémon Go) will work. Just choose the cheaper software and buy it for a month (and you can share the account with your friends).

For myself, I choose the magic version, it also works, you need to find "free" version by yourself and use at your own risk.

@Bahramj69

does it work with windows or only on mac?

Windows also works (but AnyGo don't support bluetooth mode on windows), make sure the software says it support "Pro Mode" or "Pokemon Go"

@kashif789us

I tried. I can see the updated location in maps and weather app but in health app everything was still greyed out.

Make sure the Apple Watch is powered off. Follow the instructions in the software, for example, turning off cellular. Restart the Health app on your phone, then use the Health CheckList to enable each feature

absolutely great solution man
had to spend 10$ on one month AnyGo subscription but it totally worth it and everything is activated ( now i can call it a smart watch).
also should mention windows and iPhone should be paired via bluethooth and be connected before running the app and even that may requires couple of tries to get the desired solution
cheers everyone

I'm currently on iOS 18.7 and Apple is offering me a direct upgrade to 26.1 instead of 26.
Can anyone confirm that the procedure using a valid AnyGo license worked for them on 26.1?

I'm currently on iOS 18.7 and Apple is offering me a direct upgrade to 26.1 instead of 26. Can anyone confirm that the procedure using a valid AnyGo license worked for them on 26.1?

It does!

@imReker can you please check your inbox on Reddit? I sent you a message there.

I would truly appreciate it if someone could be generous to provide me with a download link for a free alternative, or a magic version. Or even if they could share their account for a quick activation

has anyone tried with 26.4.1? I tried AnyGo and u3tools to change location, tried to switch off mobile network and changed the store location, but no success.
I also tried to put this PLIST files using iMazing editable backup. No result so far!

Hello guys, is the solution still work today? i wanned to check before buying
Thankss

I would truly appreciate it if someone could be generous to provide me with a download link for a free alternative, or a magic version. Or even if they could share their account for a quick activation

@omarsouissi, use the Virtual Location feature in the free software called 3uTools

I am so confused, is any of this working? I have ECG but nothing else. how do I enable it? I have AnyGo software but it seems it's not working.

nothing worked for me :( I guess Apple has blocked all this workarounds

Well, I have tried everything and still it shows unavailable so that's a bummer.. I checked everything, my location (on maps and weather app) showed that I was in Hong and as well in Croatia and Germany and USA but still it didnt work.. lol thats a bummer

Is it working for anyone? I tried iAnygo with a trial, but it didn't work. Before buying paid version I wanna make sure if its working for other guys? Did you buy the paid version or tried on free?

I really want hypertension feature. Using AW11 with latest version.

@imReker @nasklik @pavelgubarev

UPDATE:

I tried with the AnyGo paid version, and it worked like a charm.

I used the Newyork location to enable all features. Before, I tried North America, but sleep apnea wasn't getting activated. So I had to try again with the NYC location. It worked. Now everything is enabled on my AW11 series.

Big thanks to @imReker who added a detailed comment at the start and saved me from resetting my iphone to modify files :-D

Cheers Everyone.

@atiqdigiskills2 hey! thank you very much for the update. so what you did exactly? just set NY location and re-activated the watch? or you also modified the plist files? cheers

@atiqdigiskills2 bro can you tell me which comment of @imReker you are mentioning here, can you copy paste, here with my 16PM and AW10

@pavelgubarev I removed the SIM card, turned off Location Services, and cleared the location history by going to Settings > General > Transfer or Reset iPhone > Reset > Reset Location & Privacy. I only reset the Location & Privacy settings, nothing else.

Then connect your iPhone to the AnyGo app via Bluetooth, change the location, and open the Health app. Go to Health Checklist and set up each feature.

@stormerxd I'm referring to his first comment, where he mentioned the Bluetooth method. You don't need to edit any plist files.

tried NYC location using Xcode spoofer, but no luck

tried NYC location using Xcode spoofer, but no luck

Hey @pavelgubarev
If you're using Xcode, it won't work. You must use AnyGo in Bluetooth mode.

tried NYC location using Xcode spoofer, but no luck

Hey @pavelgubarev If you're using Xcode, it won't work. You must use AnyGo in Bluetooth mode.

When you have the AnyGo, you must turn off your Apple Watch, change the location of your iPhone, and then turn on your Watch.