mcprat

commit f3d01d3621f0800d343e42562e6e88b512c9a482
Author: Michael Pratt <[email protected]>
Date:   Tue Sep 22 15:25:42 2020 -0400

    I like cats

    Signed-off-by: Michael Pratt <[email protected]>

diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index fbc00b98c8..80d369ae04 100644

mcprat

[    0.000000] Linux version 5.4.69 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13719+835-66e04abbb6)) #0 Sat Oct 10 02:41:39 2020
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is EnGenius EAP600
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]

mcprat

[   51.540000] br-lan: port 3(ath0) entered forwarding state
 magic num  = 00000000
decoding image
[  288.050000] Restarting system.


U-Boot 1.1.4 (v1.0.0) (Nov  6 2014 - 12:56:32)

ECB1200_1750 - Scorpion 1.0DRAM:
sri

mcprat

Hit any key to stop autoboot:  0
Validating MD5Sum of 'vmlinux'... Passed!
Validating MD5Sum of 'rootfs'... Passed!
## Booting image at 9f0a0000 ...
   Image Name:   MIPS OpenWrt Linux-5.4.74
   Created:      2020-11-05   9:50:46 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3265 Bytes =  3.2 kB
   Load Address: 80060000
   Entry Point:  80060000

mcprat

[    0.000000] Linux version 5.4.74 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13719+835-66e04abbb6)) #0 Wed Nov 4 04:15:22 2020
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] MIPS: machine is EnGenius ECB350 v1
[    0.000000] SoC: Atheros AR7242 rev 1
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]

mcprat

[    0.000000] Linux version 5.4.80 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13719+1411-66e04abbb6)) #0 Fri Dec 4 03:49:15 2020
[    0.000000] SoC Type: Ralink RT3883 ver:1 eco:5
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is EnGenius ESR600H
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]

mcprat

U-boot Ver:1.0.6.198 2012/02/16


Board: Ralink APSoC DRAM:  64 MB
spi_wait_nsec: 48
spi device id: c2 20 17 c2 20 (2017c220)
find flash: MX25L6405D
raspi_read: from:30000 len:1000
.raspi_read: from:30000 len:1000
.============================================

mcprat

[    0.000000] Linux version 5.4.81 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13719+1411-66e04abbb6)) #0 Mon Dec 7 13:47:18 2020
[    0.000000] SoC Type: Ralink RT3883 ver:1 eco:5
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is EnGenius ESR600H
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]

mcprat

config openvpn 'myvpn'
        option dev 'tun'
        option reneg_sec '0'
        option verb '4'
        option persist_key '1'
        option nobind '1'
        option persist_tun '1'
        option client '1'
        option remote_cert_tls 'server'
        list remote 'example.com 9090'

mcprat

import msvcrt

print('Press key to output Windows keyboard scan codes (Ctrl + Break to quit): ', end='\n\n', flush=True)

while True:
    key = msvcrt.getwch()

    if ord(key) in (0, 224):
        ext = msvcrt.getwch()
    else: